[sane-devel] Imageclass d530

[Nate Fuhriman]

Something must still be wrong. Everytime I try to access it I just get "error
during read. device busy" I do now see it listed with "scanimage -L"
which I didn't before.
-- 
Nate Fuhriman
Utah Preparation

http://www.utahpreparation.com
cell 801-787-3405
office 888-551-0338
On Fri, Dec 06, 2013 at 10:40:09PM +0100, Rolf Bensch wrote:
> Hi Nate,
> 
> Now you need to install SANE from git as described here:
> http://www.sane-project.org/README.linux
> 
> Attached is the patch file for pixma_imageclass.c (before compiling
> patch with: 'patch pixma_imageclass.c pixma_imageclass.c.patch1').
> 
> Additionally to installation step 3.3 you need to copy attached
> d530.rules file to /etc/udev/rules.d/.
> 
> Please check all scan resolutions. I prefer xsane as frontend.
> 
> If everything is working, I'll add your scanner to SANE.
> 
> Cheers,
> Rolf
> 
> 
> Am 06.12.2013 21:16, schrieb Nate Fuhriman:
> > Bus 001 Device 004: ID 04a9:2775 Canon, Inc. 
> > 

> --- ./pixma_imageclass.c	2013-12-06 22:15:35.000000000 +0100
> +++ ../sane-backends/backend/pixma_imageclass.c	2013-12-06 22:15:40.000000000 +0100
> @@ -94,6 +94,7 @@
>  #define IR1133_PID 0x2742
>  #define MF4570_PID 0x275a
>  #define MF4890_PID 0x2773
> +#define D530_PID   0x2775
>  
>  
>  enum iclass_state_t
> @@ -784,5 +785,6 @@
>    DEV ("Canon imageCLASS MF4570dw", "MF4570dw", MF4570_PID, 600, 640, 877, 0),
>    DEV ("Canon imageRUNNER 1133", "iR1133", IR1133_PID, 600, 637, 877, PIXMA_CAP_ADFDUP),
>    DEV ("Canon i-SENSYS MF4890dw", "MF4890", MF4890_PID, 600, 640, 877, 0),
> +  DEV ("Canon imageCLASS D530", "D530", D530_PID, 600, 640, 877, 0),
>    DEV (NULL, NULL, 0, 0, 0, 0, 0)
>  };

> # Canon imageCLASS D530
> ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="2775", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"