[sane-devel] Imageclass d530

[Nate Fuhriman]

I got pass the not starting problem. This machine has to be put into
"remote scanner" mode at the actual device.

When I try to scan now it just hangs on me and the display on the
device says "An error has occured" and the following appears in my
/var/log/messages. I have also attached the usblyzer html output as
requested.

Dec 11 13:47:07 r2d2 kernel: [  661.651208] usb 2-1: usbfs: interface 1
claimed by usblp while 'scanimage' sets config #1
Dec 11 13:47:15 r2d2 kernel: [  670.385064] usb 2-1: usbfs: interface 1
claimed by usblp while 'scanimage' sets config #1
Dec 11 13:47:16 r2d2 kernel: [  670.913699] usb 2-1: usbfs: interface 1
claimed by usblp while 'scanimage' sets config #1
Dec 11 13:47:19 r2d2 kernel: [  674.327016] hub 2-0:1.0: port 1 disabled
by hub (EMI?), re-enabling...
Dec 11 13:47:19 r2d2 kernel: [  674.330553] usb 2-1: USB disconnect,
device number 2
Dec 11 13:47:19 r2d2 kernel: [  674.341357] usblp0: removed
Dec 11 13:47:19 r2d2 colord: device removed: sysfs-Canon_Inc-D530_D560
Dec 11 13:47:19 r2d2 systemd[1]: Service printer.target is not needed
anymore. Stopping.
Dec 11 13:47:19 r2d2 systemd[1]: Stopping Printer.
Dec 11 13:47:19 r2d2 systemd[1]: Stopped target Printer.
Dec 11 13:47:20 r2d2 kernel: [  674.559025] usb 2-1: new high-speed USB
device number 3 using ehci-pci
Dec 11 13:47:20 r2d2 kernel: [  674.684038] usb 2-1: New USB device
found, idVendor=04a9, idProduct=2775
Dec 11 13:47:20 r2d2 kernel: [  674.687474] usb 2-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Dec 11 13:47:20 r2d2 kernel: [  674.690815] usb 2-1: Product: D530/D560
Dec 11 13:47:20 r2d2 kernel: [  674.694190] usb 2-1: Manufacturer: Canon
Inc
Dec 11 13:47:20 r2d2 kernel: [  674.697478] usb 2-1: SerialNumber:
1131T3600452
Dec 11 13:47:20 r2d2 kernel: [  674.719116] usblp 2-1:1.1: usblp0: USB
Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x2775
Dec 11 13:47:20 r2d2 mtp-probe: checking bus 2, device 3:
"/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1"
Dec 11 13:47:20 r2d2 mtp-probe: bus: 2, device: 3 was not an MTP device
Dec 11 13:47:20 r2d2 colord: Device added: sysfs-Canon_Inc-D530_D560
Dec 11 13:47:20 r2d2 systemd[1]: Starting Printer.
Dec 11 13:47:20 r2d2 systemd[1]: Reached target Printer.
Dec 11 13:47:20 r2d2 systemd[1]: Starting Configure Plugged-In
Printer...
Dec 11 13:47:20 r2d2 systemd[1]: Started Configure Plugged-In Printer.
Dec 11 13:47:21 r2d2 udev-configure-printer: no corresponding CUPS
device found


-- 
Nate Fuhriman
Utah Preparation

http://www.utahpreparation.com
cell 801-787-3405
office 888-551-0338
On Wed, Dec 11, 2013 at 05:28:07PM +0100, Rolf Bensch wrote:
> Hi Nate,
> 
> Your scanner sticks at early scan beginning where I haven't seen
> problems before.
> 
> If possible please sniff the usb protocols of a small color scan (5mm x
> 5mm) @ 75 dpi on a Windows machine or virtual machine. You can use
> USBLyzer (export as html) or Wireshark or
> http://benoit.papillault.free.fr/usbsnoop/.
> 
> Cheers,
> Rolf
> 
> 
> Am 09.12.2013 19:11, schrieb Nate Fuhriman:
> > Attached.
> > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20131211/8270c26c/attachment-0001.html>