[sane-devel] scanbd Canon MG6250
Matthias Thon
thon at tenoch.de
Tue Feb 5 12:17:59 UTC 2013
Am Dienstag, den 05.02.2013, 13:13 +0100 schrieb Matthias Thon:
> Hello Rolf,
>
> guess i set the test environment now well. scanimage -V- shows now:
>
>
>
> If i start scanimage -A i can choose as destination on the MG6250
> root at matze-buero (my sane-pc). Then i choose JPEG A4 600dpi and press
> the COLOR Scan-Button. At the display of the MG i see "Please
> wait.....". After that i start scanimage -A again. Here the terminal
> output:
>
>
> root at matze-buero:/usr/lib/x86_64-linux-gnu# scanimage -A
> [sanei_debug] Setting debug level of pixma to 7.
> [pixma] pixma is compiled without pthread support.
> [pixma] pixma version 0.17.0
> [pixma] sanei_bjnp_find_devices:
> [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
> [pixma] eth0 is IPv6 capable, sending broadcast, socket = 4
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner not yet in our list, added it:
> D0E69C000000.fritz.box:8612
> [pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
> 2.1,IVEC;MDL:MG6200 series;CLS:IMAGE;DES:Canon MG6200
> series;SOJ:BJNP2,BJNPe; - lenght = 101
> [pixma] Scanner model = MG6200 series
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
> bjnp://D0E69C000000.fritz.box:8612
> [pixma] pixma_find_scanners() found 1 devices
> [pixma] sanei_bjnp_find_devices:
> [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
> [pixma] eth0 is IPv6 capable, sending broadcast, socket = 4
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner not yet in our list, added it:
> D0E69C000000.fritz.box:8612
> [pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
> 2.1,IVEC;MDL:MG6200 series;CLS:IMAGE;DES:Canon MG6200
> series;SOJ:BJNP2,BJNPe; - lenght = 101
> [pixma] Scanner model = MG6200 series
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
> bjnp://D0E69C000000.fritz.box:8612
> [pixma] pixma_open(): Canon PIXMA MG6200
> [pixma] sanei_bjnp_open(bjnp://D0E69C000000.fritz.box:8612, 0):
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] sanei_bjnp_activate (0)
> [pixma] sanei_bjnp_deactivate (0)
>
> All options specific to device `pixma:MG6200_D0E69C000000':
> Scan mode:
> --resolution auto||75|150|300|600|1200|2400|4800dpi [75]
> Sets the resolution of the scanned image.
> --mode auto|Color|Gray|Lineart [Color]
> Selects the scan mode (e.g., lineart, monochrome, or color).
> --source Flatbed [Flatbed]
> Selects the scan source (such as a document-feeder). Set source
> before
> mode and resolution. Resets mode and resolution to auto values.
> --button-controlled[=(yes|no)] [no]
> When enabled, scan process will not start immediately. To
> proceed,
> press "SCAN" button (for MP150) or "COLOR" button (for other
> models).
> To cancel, press "GRAY" button.
> Gamma:
> --custom-gamma[=(auto|yes|no)] [yes]
> Determines whether a builtin or a custom gamma-table should be
> used.
> --gamma-table auto|0..255,...
> Gamma-correction table. In color mode this option equally
> affects the
> red, green, and blue channels simultaneously (i.e., it is an
> intensity
> gamma table).
> --gamma auto|0.299988..5 [2.2]
> Changes intensity of midtones
> Geometry:
> -l auto|0..216.069mm [0]
> Top-left x position of scan area.
> -t auto|0..297.011mm [0]
> Top-left y position of scan area.
> -x auto|0..216.069mm [216.069]
> Width of scan-area.
> -y auto|0..297.011mm [297.011]
> Height of scan-area.
> Buttons:
> --button-update
> Update button state
> [pixma] bjnp_set_timeout to 300
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> --button-1 <int> [0] [read-only]
> Button 1
> --button-2 <int> [0] [read-only]
> Button 2
> --original <int> [0] [read-only]
> Type of original to scan
> --target <int> [0] [read-only]
> Target operation type
> Extras:
> --threshold auto|0..100% (in steps of 1) [inactive]
> Select minimum-brightness to get a white point
> --threshold-curve auto|0..127 (in steps of 1) [inactive]
> Dynamic threshold curve, from light to dark, normally 50-65
>
> [pixma] pixma_close(): Canon PIXMA MG6200
> [pixma] sanei_bjnp_close(0):
> [pixma] sanei_bjnp_deactivate (0)
> root at matze-buero:/usr/lib/x86_64-linux-gnu#
>
> As you intent, now i can see some [pixma] debug messages in the
> "Buttons" section. But the values are still "0".
>
> As i start scanimage --button-controlled=yes i can see that a
> button-state is received. Here the terminal output of that test_
>
>
> root at matze-buero:/usr/lib/x86_64-linux-gnu# scanimage
> --button-controlled=yes > test.png
> [sanei_debug] Setting debug level of pixma to 7.
> [pixma] pixma is compiled without pthread support.
> [pixma] pixma version 0.17.0
> [pixma] sanei_bjnp_find_devices:
> [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
> [pixma] eth0 is IPv6 capable, sending broadcast, socket = 4
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner not yet in our list, added it:
> D0E69C000000.fritz.box:8612
> [pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
> 2.1,IVEC;MDL:MG6200 series;CLS:IMAGE;DES:Canon MG6200
> series;SOJ:BJNP2,BJNPe; - lenght = 101
> [pixma] Scanner model = MG6200 series
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
> bjnp://D0E69C000000.fritz.box:8612
> [pixma] pixma_find_scanners() found 1 devices
> [pixma] sanei_bjnp_find_devices:
> [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
> [pixma] eth0 is IPv6 capable, sending broadcast, socket = 4
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner not yet in our list, added it:
> D0E69C000000.fritz.box:8612
> [pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
> 2.1,IVEC;MDL:MG6200 series;CLS:IMAGE;DES:Canon MG6200
> series;SOJ:BJNP2,BJNPe; - lenght = 101
> [pixma] Scanner model = MG6200 series
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] Scanner at bjnp://D0E69C000000.fritz.box:8612 was added before,
> good!
> [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
> bjnp://D0E69C000000.fritz.box:8612
> [pixma] pixma_open(): Canon PIXMA MG6200
> [pixma] sanei_bjnp_open(bjnp://D0E69C000000.fritz.box:8612, 0):
> [pixma] Forward lookup for D0E69C000000.fritz.box succeeded, using as
> hostname
> [pixma] sanei_bjnp_activate (0)
> [pixma] sanei_bjnp_deactivate (0)
> [pixma] Reader task id=1784 (forked)
> [pixma] Reader task started
> [pixma] sanei_bjnp_activate (0)
> [pixma] ==== Button-controlled scan mode is enabled.
> [pixma] ==== To proceed, press 'SCAN' or 'COLOR' button. To cancel,
> press 'GRAY' button.
> [pixma] bjnp_set_timeout to 100
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] received button status!
> [pixma] sanei_bjnp_deactivate (0)
> [pixma] sanei_bjnp_activate (0)
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] Restarting polling dialog!
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> [pixma] bjnp_set_timeout to 1000
> [pixma] bjnp_read_int(0, bufferptr, 0x40 = 64):
> ^Cscanimage: received signal 2
> [pixma] scanimage: trying to stop scanner
> sanei_bjnp_deactivate (0)
> [pixma] Reader task terminated: ECANCELED
> scanimage: sane_read: Operation was cancelled
> [pixma] pixma_close(): Canon PIXMA MG6200
> [pixma] sanei_bjnp_close(0):
> [pixma] sanei_bjnp_deactivate (0)
> root at matze-buero:/usr/lib/x86_64-linux-gnu#
>
> regards matthias
>
>
>
> Am Dienstag, den 05.02.2013, 07:34 +0100 schrieb Rolf Bensch:
> > Hi Matthias,
> >
> > You still are using the old Sane backend 1.0.23.
> >
> > Please setup the symbolic links as described in README.linux and check
> > the version again:
> > $ scanimage -V
> > scanimage (sane-backends) 1.0.24git; backend version 1.0.24
> > ^^^^^^
> > Cheers,
> > Rolf
> >
> >
> > Am 05.02.2013 06:25, schrieb Matthias Thon:
> > > Am Montag, den 04.02.2013, 18:53 +0100 schrieb Matthias Thon:
> > >> Hi Rolf,
> > >> thanks for the patch. I have build the new backend (see version.txt).
> > >> Still testing withe the other stuff from Version 1.0.23. There are no
> > >> changes after the patch (tested with net and USB-Connection). Attached
> > >> the output- and the error-output file.
> > >>
> > >> regards matthias
> > >>
> > >> Am Montag, den 04.02.2013, 12:37 +0100 schrieb Rolf Bensch:
> > >>> Hi Matthias,
> > >>>
> > >>> I prepared a first patch for your button problem. This should fix
> > >>> receiving USB interrupts.
> > >>>
> > >>> Please fetch latest Sane 1.0.24 from git: 'git clone
> > >>> git://git.debian.org/sane/sane-backends.git'. git creates a new folder
> > >>> "sane-backends". Please read "sane-backends/README.linux" how to install
> > >>> Sane.
> > >>>
> > >>> To accelerate build time you can configure Sane to compile Pixma backend
> > >>> only with: 'BACKENDS="pixma" ./configure'.
> > >>>
> > >>> Then you need to save the attached file to 'sane-backends/backend/' and
> > >>> patch "pixma_mp150.c" with: 'patch pixma_mp150.c pixma_mp150.c.diff1'.
> > >>>
> > >>> After this cd back to 'sane-backends' and install the patch with: 'make
> > >>> && sudo make install'.
> > >>>
> > >>> Now you should get "[pixma]" messages while proceeding the test I
> > >>> described in my last email.
> > >>>
> > >>> If 'scanimage -A' still doesn't get data neither for --button-1,
> > >>> --button-2, --original nor for --target, then please send me the
> > >>> "[pixma]" messages for all buttons.
> > >>>
> > >>> Cheers,
> > >>> Rolf
> > >>>
> > >>>
> > >>> Am 03.02.2013 23:33, schrieb Matthias Thon:
> > >>>> Hello Rolf,
> > >>>>
> > >>>> with both (LAN/USB) connections, i get no such messages "{pixma]" in the
> > >>>> "Buttons:" section. I've tried different buttons (PDF, JPEG...BLACK,
> > >>>> COLOR).
> > >>>>
> > >>>> Attached output and error output after pressing "COLOR SCAN" Button.
> > >>>>
> > >>>> regards Matthias
> > >>>>
> > >>>> Am Sonntag, den 03.02.2013, 20:49 +0100 schrieb Rolf Bensch:
> > >>>>> Hi Matthias,
> > >>>>>
> > >>>>> Please (1) activate debug messages with 'export SANE_DEBUG_PIXMA=11',
> > >>>>> (2) push one of your scanners's buttons and
> > >>>>> (3) read the button status with 'scanimage -A'.
> > >>>>>
> > >>>>> You should receive something similar like this:
> > >>>>>
> > >>>>> ...
> > >>>>> Buttons:
> > >>>>> --button-update
> > >>>>> Update button state
> > >>>>> [pixma] INTR T=1.580 len=32
> > >>>>> [pixma] 00000000:00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > >>>>> [pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > >>>>> [pixma]
> > >>>>> --button-1 <int> [1] [read-only]
> > >>>>> Button 1
> > >>>>> --button-2 <int> [0] [read-only]
> > >>>>> Button 2
> > >>>>> --original <int> [0] [read-only]
> > >>>>> Type of original to scan
> > >>>>> --target <int> [1] [read-only]
> > >>>>> Target operation type
> > >>>>> ...
> > >>>>>
> > >>>>> If you get lines with [pixma], please repeat this test ((2) & (3)) with
> > >>>>> all buttons and provide the output from all buttons. Please write the
> > >>>>> name of the button to the corresponding debug output.
> > >>>>>
> > >>>>> If you don't get lines with [pixma], Sane doesn't receive the USB
> > >>>>> interrupt from your scanner and I need to prepare a patch.
> > >>>>>
> > >>>>> Cheers,
> > >>>>> Rolf
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> Am 03.02.2013 13:09, schrieb Matthias Thon:
> > >>>>>> Hello Rolf,
> > >>>>>>
> > >>>>>> ihave checked your informations. The MG6250 doesn't have a target
> > >>>>>> option. Only the two buttons.I have tryed many cases on the MG but the
> > >>>>>> value of the buttons stay's at value "0". Normaly i have conncted the
> > >>>>>> printer over wlan or ethernet. If i try to push "scan" and then "color"
> > >>>>>> i get an error on the printer, because he doesn't recocnice the scanning
> > >>>>>> PC. He shows me only "local USB".
> > >>>>>>
> > >>>>>> I have connected the printer with a USB_cable. Then i can push the
> > >>>>>> "color" or "grey" button and the printe waits for the scanning process.
> > >>>>>> But scanimage -A shows no changes. The only change is in the resolution
> > >>>>>> option. This option adds 4800 dpi.
> > >>>>>>
> > >>>>>> scanimage --button-controlled doesn't start the scan after pressing
> > >>>>>> "color" or "grey" button.
> > >>>>>>
> > >>>>>> Scanning from outside (xsane) works well.
> > >>>>>>
> > >>>>>> regards Matthias
> > >>>>>>
> > >>>>>> Am Samstag, den 02.02.2013, 18:09 +0100 schrieb Rolf Bensch:
> > >>>>>>> Hi Matthias,
> > >>>>>>>
> > >>>>>>> To discover the communication between Sane and scanbd try 'scanimage
> > >>>>>>> -A'. Press a button and start 'scanimage -A' again. Repeat this until
> > >>>>>>> you'll have the codes for all buttons.
> > >>>>>>>
> > >>>>>>> For my CS9000F I get data for --button-1, --button-2 *and* --target.
> > >>>>>>>
> > >>>>>>> Please have a look to my posting here:
> > >>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2013-January/030828.html.
> > >>>>>>>
> > >>>>>>> If you don't get any codes for your buttons please contact me again.
> > >>>>>>> Then we have to patch the backend for your scanner.
> > >>>>>>>
> > >>>>>>> Cheers,
> > >>>>>>> Rolf
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>> Am 01.02.2013 16:59, schrieb Matthias Thon:
> > >>>>>>>> Hello,
> > >>>>>>>> i've tried to use scanbd with my MG6200 Series device. He finds
> > >>>>>>>> "button-1" and "button-2" option. But the value is still "0".
> > >>>>>>>>
> > >>>>>>>> I have try "Scan" -> "Black&White" or "Scan" -> "Color".
> > >>>>>>>>
> > >>>>>>>> Is there a way to see more detailed the communication between scanbd and
> > >>>>>>>> the device? (more then with debug level 7)
> > >>>>>>>>
> > >>>>>>>> regards
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>
> > >>
> > >
>
More information about the sane-devel
mailing list