[sane-devel] scanbd Canon MG6250
Matthias Thon
thon.matthias at gmail.com
Wed Feb 6 13:09:37 UTC 2013
Hi Rolf,
great.... now i see a reaction at the debug output. Seems that Button1 ist
"BLACK" and Button2 ist "COLOR". I found no reaction if scanner is opened
or closed. In some cases "FOTO", "PDF" target is set.
1. Autom. Scan -> BLACK
[pixma] INTR T=1.391 len=32
[pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[pixma]
--button-1 <int> [1] [read-only]
Button 1
--button-2 <int> [0] [read-only]
Button 2
--original <int> [0] [read-only]
Type of original to scan
--target <int> [1] [read-only]
Target operation type
2. Autom. Scan -> COLOR
[pixma] INTR T=1.315 len=32
[pixma] 00000000:00 00 00 00 01 01 03 02 01 00 00 00 00 00 00 00
[pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[pixma]
--button-1 <int> [0] [read-only]
Button 1
--button-2 <int> [1] [read-only]
Button 2
--original <int> [0] [read-only]
Type of original to scan
--target <int> [0] [read-only]
Target operation type
3. Dokument -> PDF -> BLACK
[pixma] INTR T=1.421 len=32
[pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[pixma]
--button-1 <int> [1] [read-only]
Button 1
--button-2 <int> [0] [read-only]
Button 2
--original <int> [0] [read-only]
Type of original to scan
--target <int> [1] [read-only]
Target operation type
4. Foto -> TIFF -> BLACK
[pixma] INTR T=1.421 len=32
[pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[pixma]
--button-1 <int> [1] [read-only]
Button 1
--button-2 <int> [0] [read-only]
Button 2
--original <int> [0] [read-only]
Type of original to scan
--target <int> [1] [read-only]
Target operation type
2013/2/6 Rolf Bensch <rolf at bensch-online.de>
> Hi Matthias,
>
> I prepared a 2nd patch for pixma_mp150.c. This should fix the timeout
> problem and sets "--button-1", "--button-2" and "--target". This patch
> is based on the first patch.
>
> Please test the patched version with enabled debug messages: 'export
> SANE_DEBUG_PIXMA=21' and test both buttons ("BLACK" and "COLOR") with
> 'scanimage -A'.
>
> Please test *all* buttons, also the ones on the touch screen and if
> there is a signal if the cover is opened and closed.
>
> You can see any response / signal in these lines:
>
> [pixma] INTR T=1.432 len=32
> [pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> "COLOR" button pressed:^^
> [pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Cheers,
> Rolf
>
>
>
> Am 06.02.2013 10:43, schrieb Matthias Thon:
> > Hi Rolf,
> >
> > The MG6250 has a small Display. All Buttons are normaly invisible. The
> > device only illuminate the buttons, which can be used in the actual
> > context.
> >
> > 3 Buttons are under the display. 5 Buttons are for up, down, right,
> > left and in the middle OK. Then we have a "home" and a "return" Button.
> > And at last two buttons for copy,scan in "BLACK" or "COLOR".
> >
> > For example: I press the right button under the display (Scan). After
> > that the device illuminates the home, return, black, color and the left
> > and middle buttons under the display.
> >
> > Which button we use for scanbd is equal.
> >
> > If i start scanimage -A, sane sending time and the trying to read 8
> > byte. This read failed (Resource temporarily unavailable. After that i
> > can press different buttons, but no reaction by scanimage.
> >
> >
> > After pressing "COLOR" or "BLACK" the device shows "Verarbeitung....
> > Bitte warten" and waits for about 1 Minute. Seems that the device wating
> > for transfer scan data. But the scan-motor doesn't do anything.
> >
> > regards matthias
> >
> >
> > 2013/2/6 Rolf Bensch <rolf at bensch-online.de <mailto:
> rolf at bensch-online.de>>
> >
> > Hi Matthias,
> >
> > Super! Please send me the same logs for all buttons, one by one. Then
> > I'll prepare the next patch. By now you can ignore the timeout.
> >
> > Some programs use "--button-1" to scan a page and "--button-2" to
> end a
> > scan session. For my scanner I'm using all buttons for "--button-1"
> > except button "PDF End" for "--button-2". And secondary the
> individual
> > button code is in "--target".
> >
> > I like to implement the buttons of your scanner in the same way.
> Which
> > button do you like to connect to "--button-2"?
> >
> > Cheers,
> > Rolf
> >
> >
> > Am 05.02.2013 23:13, schrieb Matthias Thon:
> > > Hi Rolf,
> > > here the dump with the higher Debug-Levels. I interrupt after
> pressing
> > > the "COLOR" Scan-Button and the second timout.
> > >
> > > regards Matthias
> > >
> > > Width of scan-area.
> > > -y auto|0..297.011mm [297.011]
> > > Height of scan-area.
> > > Buttons:
> > > --button-update
> > > Update button state
> > > [sanei_usb] sanei_usb_read_int: trying to read 64 bytes
> > > [sanei_usb] sanei_usb_read_int: wanted 64 bytes, got 32 bytes
> > > [sanei_usb] 000 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> > > ................
> > > [sanei_usb] 010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > ................
> > > [pixma] INTR T=1.432 len=32
> > > [pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> > > [pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > [pixma]
> > > [pixma] Sending time: '13/02/05 23:10'
> > > [sanei_usb] sanei_usb_write_bulk: trying to write 36 bytes
> > > [sanei_usb] 000 EB 80 00 00 00 00 00 00 00 00 00 00 00 00 00 14
> > > ................
> > > [sanei_usb] 010 31 33 2F 30 32 2F 30 35 20 32 33 3A 31 30 00 00
> > 13/02/05
> > > 23:10..
> > > [sanei_usb] 020 00 00 00 57
> > > ...W
> > > [sanei_usb] sanei_usb_write_bulk: wanted 36 bytes, wrote 36 bytes
> > > [pixma] OUT T=1.433 len=36
> > > [pixma] 00000000:eb 80 00 00 00 00 00 00 00 00 00 00 00 00 00 14
> > > [pixma] 00000010:31 33 2f 30 32 2f 30 35 20 32 33 3a 31 30 00 00
> > > [pixma] 00000020:00 00 00 57
> > > [pixma]
> > > [sanei_usb] sanei_usb_read_bulk: trying to read 8 bytes
> > > [sanei_usb] sanei_usb_read_bulk: read failed: Resource temporarily
> > > unavailable
> > > [pixma] IN T=21.436 len=-9
> > > [pixma] ERROR: ETIMEDOUT
> > > [pixma]
> > > [pixma] No response yet. Timed out in 8 sec.
> > > [sanei_usb] sanei_usb_read_bulk: trying to read 8 bytes
> > > ^C
> > >
> > >
> > >
> > > 2013/2/5 Rolf Bensch <rolf at bensch-online.de
> > <mailto:rolf at bensch-online.de> <mailto:rolf at bensch-online.de
> > <mailto:rolf at bensch-online.de>>>
> > >
> > > Hi Matthias,
> > >
> > > Sorry for my last email relating to USB and LAN. I mixed the
> > emails up
> > > in my daily digest. Please set me to cc if you send a response
> to
> > > the list.
> > >
> > > Anyway, it seems that your scanner answers the USB interrupt
> > request and
> > > the post process data handling sticks in setting your
> > scanner's clock.
> > >
> > > So I need the debug info with 'export SANE_DEBUG_PIXMA=21' and
> > > 'export SANE_DEBUG_SANEI_USB=255' to fix this issue.
> > >
> > > By now I'm only interested in the lines between "Buttons:" and
> > > "Extras:".
> > >
> > > Cheers,
> > > Rolf
> > >
> > >
> > >
> > > Am 05.02.2013 18:19, schrieb Matthias Thon:
> > > > Hi Rolf,
> > > >
> > > > now hopefully the right debug information. Now after starting
> > > scanimage
> > > > -A , it waits for the button information. I try different
> > buttons
> > > > (black, color) Changed before from JPEG to PDF or TIFF but
> > scanimage
> > > > waits till timeout. See the output.
> > > >
> > > > regards Matthias
> > > >
> > > >
> > > >
> > >
> > root at matze-Satellite-C660
> :/usr/local/src/sane-backends-git/sane-backends#
> > > scanimage
> > > > -V
> > > > scanimage (sane-backends) 1.0.24git; backend version 1.0.24
> > > >
> > >
> > root at matze-Satellite-C660
> :/usr/local/src/sane-backends-git/sane-backends#
> > > scanimage
> > > > -A
> > > > [sanei_debug] Setting debug level of pixma to 7.
> > > > [pixma] pixma is compiled without pthread support.
> > > > [pixma] pixma version 0.17.0
> > > > [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
> > > libusb:002:005
> > > > [pixma] sanei_bjnp_find_devices:
> > > > [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
> > > > [pixma] wlan0 is IPv4 capable, sending broadcast, socket = 4
> > > > [pixma] eth0 is IPv6 capable, sending broadcast, socket = 5
> > > > [pixma] wlan0 is IPv6 capable, sending broadcast, socket = 6
> > > > [pixma] pixma_find_scanners() found 1 devices
> > > > [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at
> > > libusb:002:005
> > > > [pixma] sanei_bjnp_find_devices:
> > > > [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3
> > > > [pixma] wlan0 is IPv4 capable, sending broadcast, socket = 4
> > > > [pixma] eth0 is IPv6 capable, sending broadcast, socket = 5
> > > > [pixma] wlan0 is IPv6 capable, sending broadcast, socket = 6
> > > > [pixma] pixma_open(): Canon PIXMA MG6200
> > > >
> > > > All options specific to device `pixma:04A91755_14B4F6':
> > > > Scan mode:
> > > > --resolution auto||75|150|300|600|1200|2400|4800dpi [75]
> > > > Sets the resolution of the scanned image.
> > > > --mode auto|Color|Gray|Lineart [Color]
> > > > Selects the scan mode (e.g., lineart, monochrome, or
> > color).
> > > > --source Flatbed [Flatbed]
> > > > Selects the scan source (such as a document-feeder).
> Set
> > > source
> > > > before
> > > > mode and resolution. Resets mode and resolution to
> auto
> > > values.
> > > > --button-controlled[=(yes|no)] [no]
> > > > When enabled, scan process will not start
> > immediately. To
> > > proceed,
> > > > press "SCAN" button (for MP150) or "COLOR" button
> > (for other
> > > > models).
> > > > To cancel, press "GRAY" button.
> > > > Gamma:
> > > > --custom-gamma[=(auto|yes|no)] [yes]
> > > > Determines whether a builtin or a custom gamma-table
> > > should be used.
> > > > --gamma-table auto|0..255,...
> > > > Gamma-correction table. In color mode this option
> > equally
> > > > affects the
> > > > red, green, and blue channels simultaneously (i.e.,
> > it is an
> > > > intensity
> > > > gamma table).
> > > > --gamma auto|0.299988..5 [2.2]
> > > > Changes intensity of midtones
> > > > Geometry:
> > > > -l auto|0..216.069mm [0]
> > > > Top-left x position of scan area.
> > > > -t auto|0..297.011mm [0]
> > > > Top-left y position of scan area.
> > > > -x auto|0..216.069mm [216.069]
> > > > Width of scan-area.
> > > > -y auto|0..297.011mm [297.011]
> > > > Height of scan-area.
> > > > Buttons:
> > > > --button-update
> > > > Update button state
> > > > [pixma] Sending time: '13/02/05 18:12'
> > > > [pixma] No response yet. Timed out in 8 sec.
> > > > [pixma] No response yet. Timed out in 7 sec.
> > > > [pixma] No response yet. Timed out in 6 sec.
> > > > [pixma] No response yet. Timed out in 5 sec.
> > > > [pixma] No response yet. Timed out in 4 sec.
> > > > [pixma] No response yet. Timed out in 3 sec.
> > > > [pixma] No response yet. Timed out in 2 sec.
> > > > [pixma] No response yet. Timed out in 1 sec.
> > > > [pixma] WARNING: Error in response phase. cmd:eb80
> > > > [pixma] If the scanner hangs, reset it and/or unplug the
> > USB cable.
> > > > --button-1 <int> [0] [read-only]
> > > > Button 1
> > > > --button-2 <int> [0] [read-only]
> > > > Button 2
> > > > --original <int> [0] [read-only]
> > > > Type of original to scan
> > > > --target <int> [0] [read-only]
> > > > Target operation type
> > > > Extras:
> > > > --threshold auto|0..100% (in steps of 1) [inactive]
> > > > Select minimum-brightness to get a white point
> > > > --threshold-curve auto|0..127 (in steps of 1) [inactive]
> > > > Dynamic threshold curve, from light to dark,
> > normally 50-65
> > > >
> > > > [pixma] pixma_close(): Canon PIXMA MG6200
> > > >
> > >
> > root at matze-Satellite-C660
> :/usr/local/src/sane-backends-git/sane-backends#
> > > >
> > >
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20130206/bed9dd1a/attachment-0001.html>
More information about the sane-devel
mailing list