[sane-devel] Canoscan LIDE700 issue

[Stef]

On 20/02/2013 18:06, elbichon wrote:
> Hi,
>
> I have the same problem under Ubuntu 12.04.2 LTS.
>
> Please find attached the debug.log
>
>
> $ uname -a
> Linux famille-ubuntu 3.2.0-38-generic #60-Ubuntu SMP Wed Feb 13 
> 13:22:43 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
>
> $ lsusb
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Bus 003 Device 002: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical 
> Mouse
> Bus 003 Device 010: ID 04a9:1907 Canon, Inc. CanoScan LiDE 700F
> Bus 002 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub
> Bus 002 Device 004: ID 13d3:3282 IMC Networks DVB-T + GPS Minicard 
> [RTL2832U]
> Bus 002 Device 005: ID 174f:171b Syntek
> Bus 002 Device 006: ID 03f0:2012 Hewlett-Packard OfficeJet Pro K5400
> Bus 002 Device 007: ID 04f2:1123 Chicony Electronics Co., Ltd
>
> $ sane-find-scanner
>
>   # sane-find-scanner will now attempt to detect your scanner. If the
>   # result is different from what you expected, first make sure your
>   # scanner is powered up and properly connected to your computer.
>
>   # No SCSI scanners found. If you expected something different, make 
> sure that
>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04a9 [Canon], product=0x1907 [CanoScan], 
> chip=GL847) at libusb:003:010
> found USB scanner (vendor=0x03f0 [HP], product=0x2012 [Officejet Pro 
> K5400]) at libusb:002:006
> found USB scanner (vendor=0x13d3, product=0x3282) at libusb:002:004
>   # Your USB scanner was (probably) detected. It may or may not be 
> supported by
>   # SANE. Try scanimage -L and read the backend's manpage.
>
>   # Not checking for parallel port scanners.
>
>   # Most Scanners connected to the parallel port or other proprietary 
> ports
>   # can't be detected by this program.
>
>   # You may want to run this program as root to find all devices. Once you
>   # found the scanner devices, be sure to adjust access permissions as
>   # necessary.
>
> $ scanimage -L
> device `genesys:libusb:003:010' is a Canon LiDE 700F flatbed scanner
>
> $ scanimage -V
> scanimage (sane-backends) 1.0.24git; backend version 1.0.22
>
> $ export SANE_DEBUG_GENESYS=255
> $ export SANE_DEBUG_GENESYS_LOW=255
> $ export SANE_DEBUG_GENESYS_GL646=255
> $ export SANE_DEBUG_GENESYS_GL841=255
> $ export SANE_DEBUG_GENESYS_GL843=255
> $ export SANE_DEBUG_GENESYS_GL847=255
> $ export SANE_DEBUG_GENESYS_GL124=255
> $ export SANE_DEBUG_SANEI_USB=255
> $ xsane 2>debug.log
>
> Thank you
>
> -- 
> Matth
>
>
     Hello,

     thanks for the debug log, I can see the backend version used was:

[genesys] SANE Genesys backend version 1.0 build 63 from sane-backends 
1.0.22

     please upgrade to SANE 1.0.23 to have full 700 LiDE support. It 
wasn't completed yet in 1.0.22.

Regards,
     Stef

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20130220/cce07905/attachment-0001.html>