[sane-devel] compile problems with scanbd: undefined reference to symbol 'pthread_sigmask@@GLIBC_2.2.5'

[Dominik Kopp]

Hi,

I'm trying to complile scanbd inside VirtualBox (host/client both openSUSE 
12.2 64-bit) but I have no success.

The error message during make is:
/usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../x86_64-suse-linux/bin/ld: 
dbus.o: undefined reference to symbol 'pthread_sigmask@@GLIBC_2.2.5'


Here are my executed commands with the (hopefully) important parts of the 
output messages:

dom at linux-8k4r:~> svn co https://scanbd.svn.sourceforge.net/svnroot/scanbd/
...
Ausgecheckt, Revision 132.

dom at linux-8k4r:~/scanbd/trunk> cd scanbd
dom at linux-8k4r:~/scanbd/trunk> cd trunk
dom at linux-8k4r:~/scanbd/trunk> ./configure
...
checking pkg-config is at least version 0.9.0... yes
checking for CONFUSE... yes
checking for DBUS... yes
checking for UDEV... yes
checking for SANE... no
checking for sane-config... sane-config
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/scanbd/Makefile
...


dom at linux-8k4r:~/scanbd/trunk> make
 cd . && /bin/sh /home/dom/scanbd/trunk/missing --run automake-1.11 --
foreign                                                                                                         
/home/dom/scanbd/trunk/missing: Zeile 52: automake-1.11: Kommando nicht 
gefunden.                                                                                                     
WARNING: `automake-1.11' is missing on your system.  You should only need it 
if                                                                                                       
         you modified `Makefile.am', `acinclude.m4' or `configure.ac'.                                                                                                                
         You might want to install the `Automake' and `Perl' packages.                                                                                                                
         Grab them from any GNU archive site.                                                                                                                                         
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/dom/scanbd/trunk/missing 
--run autoconf                                                                                           
aclocal.m4:17: warning: this file was generated for autoconf 2.68.
You have another version of autoconf.  It may work, but is not guaranteed 
to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 
`autoreconf'.
/bin/sh ./config.status --recheck
running CONFIG_SHELL=/bin/sh /bin/sh ./configure --no-create --no-recursion
configure: loading site script /usr/share/site/x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
...

gcc -DPACKAGE_NAME=\"scanbd\" -DPACKAGE_TARNAME=\"scanbd\" -
DPACKAGE_VERSION=\"1.2.1\" -DPACKAGE_STRING=\"scanbd\ 1.2.1\" -
DPACKAGE_BUGREPORT=\"wilhelm.meier at fh-kl.de\" -DPACKAGE_URL=\"\" -
DPACKAGE=\"scanbd\" -DVERSION=\"1.2.1\" -DSTDC_HEADERS=1 -
DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 
-DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -
DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_ALARM=1 -
DHAVE_DUP2=1 -DHAVE_FTRUNCATE=1 -DHAVE_GETCWD=1 -DHAVE_MEMSET=1 -
DHAVE_PUTENV=1 -DHAVE_REGCOMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -
DHAVE_ARPA_INET_H=1 -DHAVE_FCNTL_H=1 -DHAVE_LIMITS_H=1 -DHAVE_NETINET_IN_H=1 
-DHAVE_SYS_SOCKET_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYSLOG_H=1 -
DHAVE_UNISTD_H=1 -DHAVE_CHOWN=1 -DHAVE_FORK=1 -DHAVE_VFORK=1 -
DHAVE_WORKING_VFORK=1 -DHAVE_WORKING_FORK=1 -DHAVE_STDLIB_H=1 -
DHAVE_MALLOC=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_LINUX_LIMITS_H=1 -
DHAVE_UTMP_H=1 -DHAVE_UTMPX_H=1 -DUSE_UDEV=1 -DUSE_SANE=1 -I.    -Wall -
Wextra -
std=c99 -g  -Werror   -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include    
-DSCANBUTTOND_LIB_DIR=\"/usr/local/lib64/scanbd/scanbuttond/backends/\" -
DSCANBD_CFG_DIR=\"/usr/local/etc/scanbd/\"   -g -O2 -MT sane.o -MD -MP -MF 
.deps/sane.Tpo -c -o sane.o sane.c
mv -f .deps/sane.Tpo .deps/sane.Po
/bin/sh ../../libtool --tag=CC   --mode=link gcc -Wall -Wextra -std=c99 -g  
-Werror   -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include    -
DSCANBUTTOND_LIB_DIR=\"/usr/local/lib64/scanbd/scanbuttond/backends/\" -
DSCANBD_CFG_DIR=\"/usr/local/etc/scanbd/\"   -g -O2  -lconfuse   -ludev -lrt   
-ldbus-1     -rdynamic -lsane  -L/usr/lib64 -lnetsnmp -lcrypto -lm -ldl  -lm  
-ljpeg  -lgphoto2 -lgphoto2_port -lm -lexif       -lusb-1.0       -o scanbd 
scanbd.o daemonize.o dbus.o udev.o slog.o sane.o   -ldl 
libtool: link: gcc -Wall -Wextra -std=c99 -g -Werror -I/usr/include/dbus-1.0 
-I/usr/lib64/dbus-1.0/include -
DSCANBUTTOND_LIB_DIR=\"/usr/local/lib64/scanbd/scanbuttond/backends/\" -
DSCANBD_CFG_DIR=\"/usr/local/etc/scanbd/\" -g -O2 -rdynamic -o scanbd 
scanbd.o daemonize.o dbus.o udev.o slog.o sane.o  /usr/lib64/libconfuse.so -
ludev -lrt -ldbus-1 -lsane -L/usr/lib64 /usr/lib64/libnetsnmp.so -lcrypto -
ljpeg -lgphoto2 -lgphoto2_port -lm -lexif -lusb-1.0 -ldl
/usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../x86_64-suse-linux/bin/ld: 
dbus.o: undefined reference to symbol 'pthread_sigmask@@GLIBC_2.2.5'
/usr/lib64/gcc/x86_64-suse-linux/4.7/../../../../x86_64-suse-linux/bin/ld: 
note: 'pthread_sigmask@@GLIBC_2.2.5' is defined in DSO 
/lib64/libpthread.so.0 so try adding it to the linker command line
/lib64/libpthread.so.0: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make[1]: *** [scanbd] Fehler 1
make[1]: Leaving directory `/home/dom/scanbd/trunk/src/scanbd'
make: *** [all-recursive] Fehler 1



regards
Dominik