[sane-devel] Pulstek OpticBook 3800 - problems with openning device on 1.0.23+

[Nikolay Shaplov]

>what kind of changes have you done in the genesys backend ? I find 
>strange that

I find this strange too.

I added  
{0x07b3, 0x1300, &plustek_3800_model},
into 
 Genesys_USB_Device_Entry genesys_usb_device_list[] 

and added 

static Genesys_Model plustek_3800_model = {
  "plustek-opticbook-3800",     /* Name */
  "PLUSTEK",                    /* Device vendor string */
  "OpticBook 3800",             /* Device model name */
  GENESYS_GL847,
  NULL,
  {/*2400,*/ 1200, 600, 400, 300, 200, 150, 100, 75, 0},        /* possible y-resolutions */
  {16, 8, 0},                   /* possible depths in gray mode */
  {16, 8, 0},                   /* possible depths in color mode */

  SANE_FIX (0.42),/*SANE_FIX (0.42),             Start of scan area in mm  (x) */
  SANE_FIX (6.75),/*SANE_FIX (7.9),              Start of scan area in mm (y) */
  SANE_FIX (216.0),/*SANE_FIX (216.0),           Size of scan area in mm (x) */
  SANE_FIX (297.0),/*SANE_FIX (297.0),           Size of scan area in mm (y) */

  SANE_FIX (0.0),               /* Start of white strip in mm (y) */
  SANE_FIX (0.0),               /* Start of black mark in mm (x) */

  SANE_FIX (0.0),               /* Start of scan area in TA mode in mm (x) */
  SANE_FIX (0.0),               /* Start of scan area in TA mode in mm (y) */
  SANE_FIX (0.0),               /* Size of scan area in TA mode in mm (x) */
  SANE_FIX (0.0),               /* Size of scan area in TA mode in mm (y) */

  SANE_FIX (0.0),               /* Start of white strip in TA mode in mm (y) */

  SANE_FIX (0.0),               /* Size of scan area after paper sensor stops
                                   sensing document in mm */
  SANE_FIX (0.0),               /* Amount of feeding needed to eject document
                                   after finishing scanning in mm */
 
  0, 24, 48,                    /* RGB CCD Line-distance correction in pixel */

  COLOR_ORDER_RGB,              /* Order of the CCD/CIS colors */

  SANE_FALSE,                   /* Is this a CIS scanner? */
  SANE_FALSE,                   /* Is this a sheetfed scanner? */
  CCD_PLUSTEK_3600,
  DAC_PLUSTEK_3600,
  GPO_PLUSTEK_3600,
  MOTOR_PLUSTEK_3600,
  GENESYS_FLAG_UNTESTED         /* not fully working yet */
          | GENESYS_FLAG_CUSTOM_GAMMA
          | GENESYS_FLAG_SKIP_WARMUP
          | GENESYS_FLAG_DARK_CALIBRATION
          | GENESYS_FLAG_OFFSET_CALIBRATION
          | GENESYS_FLAG_LAZY_INIT
          | GENESYS_FLAG_HALF_CCD_MODE,/*
      | GENESYS_FLAG_NO_CALIBRATION,*/
  GENESYS_HAS_NO_BUTTONS,
  7,
  200
};

It is a clone of  plustek_3600_model with   GENESYS_GL841, replaced with   GENESYS_GL847, 
and names changed...

That's all I did, and same trick makes sane at least try to move scanner's head in 1.0.22


> libusb:002:007 is opened, then libusb:002:006 is tried.
Oh... I should be more attentive. I did not noticed that.

> How many scanners do you have?
Actually my notebook has webcam and fingerprint scanner in it.
the first one is detected by sane as an acceptable input device (but I've never tried to use it this way)

> What does lsusb reports ?

$ sudo lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0489:e00d Foxconn / Hon Hai Broadcom Bluetooth 2.1 Device
Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader
Bus 001 Device 005: ID 04f2:b1c1 Chicony Electronics Co., Ltd 
Bus 002 Device 004: ID 07b3:1300 Plustek, Inc.