[sane-devel] Bizhub 162 dont work under SANE

rid r1o2m3a4 at yandex.ua
Fri Oct 4 13:14:43 UTC 2013


Dear Sirs, 

Please help me how to make scanner Bizhub 162 work under SANE. I have connected it according to  the instructions at http://www.sane-project.org/sane-backends.html where it is specified the following: "Bizhub 162 uses a similar protocol as the magicolor 1690MF, according to Ilia Sotnikov". I defined in /etc/sane.d/magicolor.conf the line usb 0x132b 0x201a. According to the information of the sane-find-scanner "found USB scanner (vendor=0x132b [KONICA MINOLTA], product=0x201a [KONICA MINOLTA 162 TWAIN Device ]) at libusb:002:002", however scanimage -L says "No scanners were identified.... " Please specify the error and tell how to eliminate it.

Best regards,
Roman Ridko

---------------------------------------------------------------------------------------

Добрый день! 

Подскажите пожалуйста, как мне заставить работать сканер Bizhub 162 под SANE. Подключал согласно http://www.sane-project.org/sane-backends.html, где указано что "Bizhub 162 uses a similar protocol as the magicolor 1690MF, according to Ilia Sotnikov". Я определил в /etc/sane.d/magicolor.conf строку usb 0x132b 0x201a. Cогласно информации, выдаваемой sane-find-scanner "found USB scanner (vendor=0x132b [KONICA MINOLTA], product=0x201a [KONICA MINOLTA 162 TWAIN Device ]) at libusb:002:002", однако scanimage -L выдает "No scanners were identified.... " Подскажите, пожалуйста, в чем ошибка и как её исправить.

С уважением Роман Ридько



More information about the sane-devel mailing list