[sane-devel] sane problems on Ubuntu 12.04

[Pjotr LePetit]

Helleo.
I have now compiled and installed the development version of SANE and everything works fine. Another tip to anybody having problems with the 9000F: check if the lock switch (under the lid) is on. 
A big thank you to the developers of SANE. 
P.
----- Original Message -----
From: Rolf Bensch
Sent: 09/02/13 09:44 PM
To: Pjotr LePetit
Subject: Re: [sane-devel] sane problems on Ubuntu 12.04

Hi Pjotr,

For your CS9000F Mark II you need the developer version from SANE.

Please install SANE again as described in README.linux.

Please also check 'scanimage -V' and 'scanimage -A'.

If you still have problems please provide debug output messages enabled with 'export SANE_DEBUG_PIXMA=4'.

Cheers,
Rolf

Am 31.08.2013 21:18, schrieb Pjotr LePetit:
Hi.
I am trying to get CanoScan 9000F to work with sane on Kubuntu. It does not work out of the box as it is supposed to, so I have compiled and tried sane-backends-1.0.23, sane-backends-1.0.24 and the developmentr version sane-backends-543393d: 
$ sudo make uninstall
$ ./configure BACKENDS="pixma" 
$ make
$ sudo make install
In etc/udev/rules.d/10-local.rules: ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="190d", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
Some info:
$ uname 
Linux fourier 3.2.0-52-generic #78-Ubuntu SMP Fri Jul 26 16:21:44 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
$ sudo scanimage -L
$ device `pixma:04A9190D' is a CANON Canoscan 9000F Mark II multi-function peripheral
$ sudo scanimage > out.ps
$ scanimage: sane_read: Error during device I/O
I get this response both with 1.0.24 and the dev version. 1.0.24 gives no output. 
Any idea what to try next? 
Pjotr.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20130903/f6cd7751/attachment.html>