[sane-devel] Canon Pixma MG5650 (MG5600 series)

[Raphael Kugelmann]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

this is my first mail to the Sane devel mailing list, hopefully it's OK,
to write it here.

I have the mentioned Pixma MG5650 and unfortunately sane does not detect
it during the standard scan process which is performed by the
Scan-Application (e.g. skanlite).

I've updated already the sane version to the latest Git version:

scanimage -V
++ scanimage (sane-backends) 1.0.25git; backend version 1.0.24

Unfortunately, this has no effect on the result. skanlite is still not
able to detect the scanner.
In general, the scanner is detected by the system, lsusb shows this:
lsusb
++ Bus 003 Device 006: ID 04a9:177f Canon, Inc.

But scanimage -L does not detect anything:
scanimage -L
++ No scanners were identified. If you were expecting something different,
++ check that the scanner is plugged in, turned on and detected by the
++ sane-find-scanner tool (if appropriate). Please read the documentation
++ which came with this software (README, FAQ, manpages).

sane-find-scanner is able to identify the scanner and its series number:
sane-find-scanner
++ found USB scanner (vendor=0x04a9 [Canon], product=0x177f [MG5600
series]) at libusb:003:006

In case you need further information, I can provide it, if you tell me
what you need and where I can get it from.

Thanks in advance

raph
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBAgAGBQJUf55DAAoJEGlRQBgnsuzectoIAJZwY0+TFjB2iocDBzMyWYSf
SwM2FhSPfo5I6mpDg0ZA3I/99CJ+0sgGp/IUzMLeLLUV8ZZuCy8D6zZzSHivSd9S
0WeRi7t16lf0eEBB2Z9+qRs7aRgtrBDRMl6Qi9uEBTxDDdQNd+ImZQpEdbP6CaQj
eUwDc4p8mUUaJDw83cMe67RHSA4vvoVn0fh4A9t/8OQeL1HT2RL/f940LJNHxIiP
fhrJ4savfzDWx3xP52CjppqY50GGBmFFe9LnVKVkCCzOOTGEsNUMdPGtlSMtoYbE
+rfbsOYMOhRAW8INDEFU8RUzc/S3IRGZKB9uIIQBasnI2aflnLMY80zEY+mFLLQ=
=ExhD
-----END PGP SIGNATURE-----