[sane-devel] Fwd: Re: Canon Pixma MG5650 (MG5600 series)

[Raphael Kugelmann]

Hi Allan,

I got it now.
The new version was not registered to the System, therefore the 1.0.25
version was not used.
Now, I'm able to scan with the Pixma MG5650!

Thanks!


-------- Weitergeleitete Nachricht --------
Betreff: 	Re: [sane-devel] Canon Pixma MG5650 (MG5600 series)
Datum: 	Thu, 04 Dec 2014 20:04:30 +0100
Von: 	Raphael Kugelmann <raphael.ku at gmx.de>
An: 	m. allan noah <kitno455 at gmail.com>
Kopie (CC): 	sane-devel <sane-devel at lists.alioth.debian.org>



Hi Allan,

thanks for the hint.
You are right, the backend version is still 1.0.24.
How can I change this?

I've downloaded the sane with this git clone command:
git clone git://anonscm.debian.org/sane/sane-backends.git
According to the changelog, its the latest version (2014-11-18 Rolf
Bensch <rolf at bensch hyphen online dot de>)

How did you get this version?

Thanks in advance!


Am 04.12.2014 um 02:01 schrieb m. allan noah:
> I think you are not running the version you think you are. On my system:
>
> scanimage -V
> scanimage (sane-backends) 1.0.25git; backend version 1.0.25
>
> On Wed, Dec 3, 2014 at 6:35 PM, Raphael Kugelmann <raphael.ku at gmx.de>
wrote:
>>
> Hello,
>
> this is my first mail to the Sane devel mailing list, hopefully it's OK,
> to write it here.
>
> I have the mentioned Pixma MG5650 and unfortunately sane does not detect
> it during the standard scan process which is performed by the
> Scan-Application (e.g. skanlite).
>
> I've updated already the sane version to the latest Git version:
>
> scanimage -V
> ++ scanimage (sane-backends) 1.0.25git; backend version 1.0.24
>
> Unfortunately, this has no effect on the result. skanlite is still not
> able to detect the scanner.
> In general, the scanner is detected by the system, lsusb shows this:
> lsusb
> ++ Bus 003 Device 006: ID 04a9:177f Canon, Inc.
>
> But scanimage -L does not detect anything:
> scanimage -L
> ++ No scanners were identified. If you were expecting something different,
> ++ check that the scanner is plugged in, turned on and detected by the
> ++ sane-find-scanner tool (if appropriate). Please read the documentation
> ++ which came with this software (README, FAQ, manpages).
>
> sane-find-scanner is able to identify the scanner and its series number:
> sane-find-scanner
> ++ found USB scanner (vendor=0x04a9 [Canon], product=0x177f [MG5600
> series]) at libusb:003:006
>
> In case you need further information, I can provide it, if you tell me
> what you need and where I can get it from.
>
> Thanks in advance
>
> raph
>>
>>
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>Â Â Â Â Â Â Â Â Â Â Â Â Â  to sane-devel-request at lists.alioth.debian.org
>
>
>




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20141204/6e7910a7/attachment.html>