[sane-devel] MX375 no recovery from ADF empty when scan started
Matthias Peter Walther
MatthiasPeterW at aol.com
Wed May 21 07:51:28 UTC 2014
Hallo Rolf,
I can't notice any change of behavior here. To make sure, that I use the
patched version, I manually deleted all libsane*.
See log attached.
And the scan does not start, if I insert paper during the timeout
countdown. The scanner beeps, so the firmware detects the inserted
paper. But the scan does not start.
Grüße
Matthias
On 20.05.2014 22:44, Rolf Bensch wrote:
> Hi Matthias,
>
> Am 20.05.2014 17:49, schrieb Matthias Peter Walther:
>> Hallo Rolf,
>>
>> sorry to bother you again. But here is another bug with my MX375.
> No problem.
>
>> If I start an ADF-scan while the ADF is empty, the scanner does not
>> recover and needs to be restarted by hand.
> Attached patch should fix this. The patch is based on recent git code.
>
>> [...]
>>
>> I mean scanning ADF without paper in it is stupid, but it should not
>> crash the device :)
> It's not stupid. Maybe you started the job and forgot to put the paper
> into the ADF. Then the job should start scanning if you put the paper
> into the ADF *before* timeout counted down to 0 and aborts the job.
>
> Please test, if scanning starts if you put paper into the ADF during
> timeout counts down.
>
> Cheers,
> Rolf
-------------- next part --------------
mpw at Server1:~$ export SANE_DEBUG_PIXMA=11
mpw at Server1:~$ scanimage --source "Automatic Document Feeder" --batch=test%02d.pnm
[sanei_debug] Setting debug level of pixma to 11.
[pixma] pixma is compiled with pthread support.
[pixma] pixma version 0.17.8
[pixma] pixma_collect_devices() found Canon PIXMA MX370 Series at libusb:001:010
[pixma] pixma_find_scanners() found 1 devices
[pixma] pixma_collect_devices() found Canon PIXMA MX370 Series at libusb:001:010
[pixma] pixma_open(): Canon PIXMA MX370 Series
Scanning -1 pages, incrementing by 1, numbering from 1
Scanning page 1
[pixma] Reader task id=140139417962240 (threaded)
[pixma] Reader task started
[pixma]
[pixma] pixma_scan(): start
[pixma] line_size=1914 image_size=2009700 channels=3 depth=8
[pixma] dpi=75x75 offset=(0,0) dimension=638x1050
[pixma] gamma_table=0x18c9f10 source=1
[pixma] threshold=127 threshold_curve=0
[pixma] ADF page count: 0
[pixma] OUT T=2.851 len=288
[pixma] 00000000:3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 22 31
[pixma] 00000010:2e 30 22 20 65 6e 63 6f 64 69 6e 67 3d 22 75 74
[pixma] 00000020:66 2d 38 22 20 3f 3e 3c 63 6d 64 20 78 6d 6c 6e
[pixma] 00000030:73 3a 69 76 65 63 3d 22 68 74 74 70 3a 2f 2f 77
[pixma] 00000040:77 77 2e 63 61 6e 6f 6e 2e 63 6f 6d 2f 6e 73 2f
[pixma] 00000050:63 6d 64 2f 32 30 30 38 2f 30 37 2f 63 6f 6d 6d
[pixma] 00000060:6f 6e 2f 22 3e 3c 69 76 65 63 3a 63 6f 6e 74 65
[pixma] 00000070:6e 74 73 3e 3c 69 76 65 63 3a 6f 70 65 72 61 74
[pixma] ...
[pixma]
[pixma] IN T=2.857 len=365
[pixma] 00000000:3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 22 31
[pixma] 00000010:2e 30 22 20 65 6e 63 6f 64 69 6e 67 3d 22 75 74
[pixma] 00000020:66 2d 38 22 20 3f 3e 0d 0a 3c 63 6d 64 20 78 6d
[pixma] 00000030:6c 6e 73 3a 69 76 65 63 3d 22 68 74 74 70 3a 2f
[pixma] 00000040:2f 77 77 77 2e 63 61 6e 6f 6e 2e 63 6f 6d 2f 6e
[pixma] 00000050:73 2f 63 6d 64 2f 32 30 30 38 2f 30 37 2f 63 6f
[pixma] 00000060:6d 6d 6f 6e 2f 22 3e 0d 0a 09 3c 69 76 65 63 3a
[pixma] 00000070:63 6f 6e 74 65 6e 74 73 3e 0d 0a 09 09 3c 69 76
[pixma] ...
[pixma]
[pixma] XML message sent to scanner:
<?xml version="1.0" encoding="utf-8" ?><cmd xmlns:ivec="http://www.canon.com/ns/cmd/2008/07/common/"><ivec:contents><ivec:operation>StartJob</ivec:operation><ivec:param_set servicetype="scan"><ivec:jobID>00000001</ivec:jobID><ivec:bidi>1</ivec:bidi></ivec:param_set></ivec:contents></cmd>
[pixma] XML response back from scanner:
<?xml version="1.0" encoding="utf-8" ?>
<cmd xmlns:ivec="http://www.canon.com/ns/cmd/2008/07/common/">
<ivec:contents>
<ivec:operation>StartJobResponse</ivec:operation>
<ivec:param_set servicetype="scan">
<ivec:response>OK</ivec:response>
<ivec:response_detail/>
<ivec:jobID>00000001</ivec:jobID>
</ivec:param_set>
</ivec:contents>
</cmd>
[pixma] OUT T=2.858 len=390
[pixma] 00000000:3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 22 31
[pixma] 00000010:2e 30 22 20 65 6e 63 6f 64 69 6e 67 3d 22 75 74
[pixma] 00000020:66 2d 38 22 20 3f 3e 3c 63 6d 64 20 78 6d 6c 6e
[pixma] 00000030:73 3a 69 76 65 63 3d 22 68 74 74 70 3a 2f 2f 77
[pixma] 00000040:77 77 2e 63 61 6e 6f 6e 2e 63 6f 6d 2f 6e 73 2f
[pixma] 00000050:63 6d 64 2f 32 30 30 38 2f 30 37 2f 63 6f 6d 6d
[pixma] 00000060:6f 6e 2f 22 20 78 6d 6c 6e 73 3a 76 63 6e 3d 22
[pixma] 00000070:68 74 74 70 3a 2f 2f 77 77 77 2e 63 61 6e 6f 6e
[pixma] ...
[pixma]
[pixma] IN T=2.861 len=510
[pixma] 00000000:3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 22 31
[pixma] 00000010:2e 30 22 20 65 6e 63 6f 64 69 6e 67 3d 22 75 74
[pixma] 00000020:66 2d 38 22 20 3f 3e 0d 0a 3c 63 6d 64 20 78 6d
[pixma] 00000030:6c 6e 73 3a 69 76 65 63 3d 22 68 74 74 70 3a 2f
[pixma] 00000040:2f 77 77 77 2e 63 61 6e 6f 6e 2e 63 6f 6d 2f 6e
[pixma] 00000050:73 2f 63 6d 64 2f 32 30 30 38 2f 30 37 2f 63 6f
[pixma] 00000060:6d 6d 6f 6e 2f 22 0d 0a 78 6d 6c 6e 73 3a 76 63
[pixma] 00000070:6e 3d 22 68 74 74 70 3a 2f 2f 77 77 77 2e 63 61
[pixma] ...
[pixma]
[pixma] XML message sent to scanner:
<?xml version="1.0" encoding="utf-8" ?><cmd xmlns:ivec="http://www.canon.com/ns/cmd/2008/07/common/" xmlns:vcn="http://www.canon.com/ns/cmd/2008/07/canon/"><ivec:contents><ivec:operation>VendorCmd</ivec:operation><ivec:param_set servicetype="scan"><ivec:jobID>00000001</ivec:jobID><vcn:ijoperation>ModeShift</vcn:ijoperation><vcn:ijmode>1</vcn:ijmode></ivec:param_set></ivec:contents></cmd>
[pixma] XML response back from scanner:
<?xml version="1.0" encoding="utf-8" ?>
<cmd xmlns:ivec="http://www.canon.com/ns/cmd/2008/07/common/"
xmlns:vcn="http://www.canon.com/ns/cmd/2008/07/canon/">
<ivec:contents>
<ivec:operation>VendorCmdResponse</ivec:operation>
<ivec:param_set servicetype="scan">
<ivec:response>OK</ivec:response>
<ivec:response_detail/>
<vcn:ijoperation>ModeShiftResponse</vcn:ijoperation>
<vcn:ijresponse>OK</vcn:ijresponse>
<vcn:ijresponse_detail/>
</ivec:param_set>
</ivec:contents>
</cmd>
[pixma] OUT T=2.965 len=16
[pixma] 00000000:f3 20 00 00 00 00 00 00 00 00 00 00 00 00 00 10
[pixma]
[pixma] IN T=2.965 len=24
[pixma] 00000000:06 06 00 00 00 00 00 00 03 01 00 00 00 00 00 00
[pixma] 00000010:00 00 21 00 00 00 00 db
[pixma]
[pixma] Current status: paper=1 cal=0 lamp=0 busy=0
[pixma] INTR T=3.097 len=32
[pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[pixma]
[pixma] Sending time: '14/05/21 09:45'
[pixma] OUT T=3.097 len=36
[pixma] 00000000:eb 80 00 00 00 00 00 00 00 00 00 00 00 00 00 14
[pixma] 00000010:31 34 2f 30 35 2f 32 31 20 30 39 3a 34 35 00 00
[pixma] 00000020:00 00 00 49
[pixma]
[pixma] IN T=3.099 len=8
[pixma] 00000000:06 06 00 00 00 00 00 00
[pixma]
[pixma] No paper in ADF. Timed out in 9 sec.
[pixma] INTR T=3.353 len=32
[pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[pixma]
[pixma] Sending time: '14/05/21 09:45'
[pixma] OUT T=3.353 len=36
[pixma] 00000000:eb 80 00 00 00 00 00 00 00 00 00 00 00 00 00 14
[pixma] 00000010:31 34 2f 30 35 2f 32 31 20 30 39 3a 34 35 00 00
[pixma] 00000020:00 00 00 49
[pixma]
[pixma] IN T=3.355 len=8
[pixma] 00000000:06 06 00 00 00 00 00 00
[pixma]
[pixma] No paper in ADF. Timed out in 8 sec.
[pixma] No paper in ADF. Timed out in 7 sec.
[pixma] No paper in ADF. Timed out in 6 sec.
[pixma] No paper in ADF. Timed out in 5 sec.
[pixma] No paper in ADF. Timed out in 4 sec.
[pixma] No paper in ADF. Timed out in 3 sec.
[pixma] No paper in ADF. Timed out in 2 sec.
[pixma] No paper in ADF. Timed out in 1 sec.
[pixma] No paper in ADF. Timed out in 0 sec.
[pixma] pixma_scan() failed ENO_PAPER
[pixma] Reader task terminated: ENO_PAPER
[pixma] read_image():reader task closed the pipe:0 bytes received, 2009700 bytes expected
scanimage: sane_read: Document feeder out of documents
Scanned page 1. (scanner status = 7)
[pixma] pixma_close(): Canon PIXMA MX370 Series
mpw at Server1:~$ scanimage > test.pnm
[sanei_debug] Setting debug level of pixma to 11.
[pixma] pixma is compiled with pthread support.
[pixma] pixma version 0.17.8
[pixma] pixma_collect_devices() found Canon PIXMA MX370 Series at libusb:001:010
[pixma] pixma_find_scanners() found 1 devices
[pixma] pixma_collect_devices() found Canon PIXMA MX370 Series at libusb:001:010
[pixma] pixma_open(): Canon PIXMA MX370 Series
[pixma] Reader task started
[pixma]
[pixma] pixma_scan(): start
[pixma] line_size=1914 image_size=1678578 channels=3 depth=8
[pixma] dpi=75x75 offset=(0,0) dimension=638x877
[pixma] gamma_table=0x2389f10 source=0
[pixma] threshold=127 threshold_curve=0
[pixma] ADF page count: 0
[pixma] Reader task id=140364930856704 (threaded)
[pixma] OUT T=2.979 len=288
[pixma] 00000000:3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 22 31
[pixma] 00000010:2e 30 22 20 65 6e 63 6f 64 69 6e 67 3d 22 75 74
[pixma] 00000020:66 2d 38 22 20 3f 3e 3c 63 6d 64 20 78 6d 6c 6e
[pixma] 00000030:73 3a 69 76 65 63 3d 22 68 74 74 70 3a 2f 2f 77
[pixma] 00000040:77 77 2e 63 61 6e 6f 6e 2e 63 6f 6d 2f 6e 73 2f
[pixma] 00000050:63 6d 64 2f 32 30 30 38 2f 30 37 2f 63 6f 6d 6d
[pixma] 00000060:6f 6e 2f 22 3e 3c 69 76 65 63 3a 63 6f 6e 74 65
[pixma] 00000070:6e 74 73 3e 3c 69 76 65 63 3a 6f 70 65 72 61 74
[pixma] ...
[pixma]
[pixma] IN T=2.980 len=8
[pixma] 00000000:15 15 00 00 00 00 00 00
[pixma]
[pixma] XML message sent to scanner:
<?xml version="1.0" encoding="utf-8" ?><cmd xmlns:ivec="http://www.canon.com/ns/cmd/2008/07/common/"><ivec:contents><ivec:operation>StartJob</ivec:operation><ivec:param_set servicetype="scan"><ivec:jobID>00000001</ivec:jobID><ivec:bidi>1</ivec:bidi></ivec:param_set></ivec:contents></cmd>
[pixma] XML response back from scanner:
[pixma] pixma_scan() failed EPROTO
[pixma] Reader task terminated: EPROTO
[pixma] read_image():reader task closed the pipe:0 bytes received, 1678578 bytes expected
scanimage: sane_read: Error during device I/O
[pixma] pixma_close(): Canon PIXMA MX370 Series
More information about the sane-devel
mailing list