[sane-devel] [pixma-backend] Test failed: MG2450

[Marcus Wellnitz]

Hello Rolf,

Thanks for your help.

I've got it running successfully, now.

* install linusb-dev (common mistake)
* build from source
* adduser <MYUSER> scanner
* relogin

Scanner works as expected.

Maybe someone wants to update the Status at:
http://sane-project.org/sane-mfgs.html#Z-CANON
PIXMA MG2400 Series  Untested --> Complete

Thanks for your help.

Greetings from the sunny Haifa

Marcus

Am 14.09.2014 um 21:27 schrieb Rolf Bensch:
> Hi Marcus,
>
> Did you follow the installation description in README.linux, which comes
> with the source code?
>
> Please test the used Sane version with 'scanimage -V'. You should see:
> scanimage (sane-backends) 1.0.25git; backend version 1.0.25
>
> Please install resent Sane from git (1.0.25). I'd like to patch only the
> recent version, if needed.
>
> Cheers,
> Rolf
>
>
>
> Am 13.09.2014 um 12:08 schrieb Marcus Wellnitz:
>> Hello,
>>
>> at the website there was a hint "testers needed" for that device.
>> I try to get it running on a Ubuntu 14.04 environment.
>>
>> First shot with on board sane version 1.0.14-9 failed.
>>
>> after downloading an installing 1.0.24 (stable) as well as
>> sane-backends-git20140913 I had no success.
>>
>> ================================
>> what I did:
>> FILE=https://alioth.debian.org/frs/download.php/file/3958/sane-backends-1.0.24.tar.gz
>> FILE=http://www.sane-project.org/snapshots/sane-backends-git20140913.tar.gz
>> wget $FILE
>> tar xzvf <$FILE>
>> cd [sane-backends-1.0.24|sane-backends-git20140913]
>> ./configure
>> make
>> sudo make install
>>
>> sudo sane-find-scanner
>> ================================
>>
>> With the Ubuntu (old) sane version there were listed 2 devices:
>> 1. HP-Scanner (works)
>> 2. Lenovo? fingerprint reader
>>
>> With the fresh compiled source versions no scanners have been detected.
>> sane-find-scanner pixma:04a9176c_123456
>>
>> syslog after plugging my scanner to the computer:
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.508096] usb 1-1:
>> new high-speed USB device number 4 using ehci-pci
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645013] usb 1-1:
>> New USB device found, idVendor=04a9, idProduct=176c
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645024] usb 1-1:
>> New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645030] usb 1-1:
>> Product: MG2400 series
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645036] usb 1-1:
>> Manufacturer: Canon
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645041] usb 1-1:
>> SerialNumber: 123456
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 mtp-probe: checking bus 1,
>> device 4: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1"
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 mtp-probe: bus: 1, device: 4 was
>> not an MTP device
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.683171] calling
>> usblp_driver_init+0x0/0x1000 [usblp] @ 20828
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.686903] usblp
>> 1-1:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid
>> 0x04A9 pid 0x176C
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.687808] usbcore:
>> registered new interface driver usblp
>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.687817] initcall
>> usblp_driver_init+0x0/0x1000 [usblp] returned 0 after 4528 usecs
>>
>> (the serial number ist modified for security reasons)
>>
>> Do I have to install new sane-frontend software as well?
>> What can I do to provide you with useful informations to get it working
>> or at least to know that it would never work wit that version or setup?
>>
>> thanks
>>
>> Marcus
>>
>>
>
>


-- 
Marcus Wellnitz