[sane-devel] [pixma-backend] Test failed: MG2450

[Marcus Wellnitz]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Rolf,

Thanks for the link to your ppa. I#ve investigated some time in
searching a ppa but the resulting ppa's were verry outdated (file dates
2010, 2012). :-(

I've just checked the website @ http://sane-project.org/sane-mfgs.html
At the bottom there is already the message:
This page was last updated on Mon Sep 30 21:38:57 2013 by sane-desc 3.5
from sane-backends 1.0.24

Maybe some automated tasks failed for a long time?

Many thanks for your good job

greetings from Haifa

Marcus

Am 16.09.2014 um 10:10 schrieb Rolf Bensch:
> Hi Marcus,
>
> I just committed the updated doc files to git repository. The website
> will update next night.
>
> Maybe you'd like to use my Ubuntu ppa: 'sudo add-apt-repository
> ppa:rolfbensch/sane-git'.
>
> Many thanks for your help.
>
> Cheers,
> Rolf
>
>
>
> Am 15.09.2014 um 16:41 schrieb Marcus Wellnitz:
>> Hello Rolf,
>>
>> Thanks for your help.
>>
>> I've got it running successfully, now.
>>
>> * install linusb-dev (common mistake)
>> * build from source
>> * adduser <MYUSER> scanner
>> * relogin
>>
>> Scanner works as expected.
>>
>> Maybe someone wants to update the Status at:
>> http://sane-project.org/sane-mfgs.html#Z-CANON
>> PIXMA MG2400 Series  Untested --> Complete
>>
>> Thanks for your help.
>>
>> Greetings from the sunny Haifa
>>
>> Marcus
>>
>> Am 14.09.2014 um 21:27 schrieb Rolf Bensch:
>>> Hi Marcus,
>>>
>>> Did you follow the installation description in README.linux, which comes
>>> with the source code?
>>>
>>> Please test the used Sane version with 'scanimage -V'. You should see:
>>> scanimage (sane-backends) 1.0.25git; backend version 1.0.25
>>>
>>> Please install resent Sane from git (1.0.25). I'd like to patch only the
>>> recent version, if needed.
>>>
>>> Cheers,
>>> Rolf
>>>
>>>
>>>
>>> Am 13.09.2014 um 12:08 schrieb Marcus Wellnitz:
>>>> Hello,
>>>>
>>>> at the website there was a hint "testers needed" for that device.
>>>> I try to get it running on a Ubuntu 14.04 environment.
>>>>
>>>> First shot with on board sane version 1.0.14-9 failed.
>>>>
>>>> after downloading an installing 1.0.24 (stable) as well as
>>>> sane-backends-git20140913 I had no success.
>>>>
>>>> ==============================
>>>> what I did:
>>>>
FILE=tps://alioth.debian.org/frs/download.php/file/3958/sane-backends-1.0.24.tar.gz
>>>>
FILE=tp://www.sane-project.org/snapshots/sane-backends-git20140913.tar.gz
>>>> wget $FILE
>>>> tar xzvf <$FILE>
>>>> cd [sane-backends-1.0.24|sane-backends-git20140913]
>>>> ./configure
>>>> make
>>>> sudo make install
>>>>
>>>> sudo sane-find-scanner
>>>> ==============================
>>>>
>>>> With the Ubuntu (old) sane version there were listed 2 devices:
>>>> 1. HP-Scanner (works)
>>>> 2. Lenovo? fingerprint reader
>>>>
>>>> With the fresh compiled source versions no scanners have been detected.
>>>> sane-find-scanner pixma:04a9176c_123456
>>>>
>>>> syslog after plugging my scanner to the computer:
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.508096] usb 1-1:
>>>> new high-speed USB device number 4 using ehci-pci
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645013] usb 1-1:
>>>> New USB device found, idVendora9, idProduct6c
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645024] usb 1-1:
>>>> New USB device strings: Mfr= Product=2, SerialNumber=3
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645030] usb 1-1:
>>>> Product: MG2400 series
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645036] usb 1-1:
>>>> Manufacturer: Canon
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645041] usb 1-1:
>>>> SerialNumber: 123456
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 mtp-probe: checking bus 1,
>>>> device 4: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1"
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 mtp-probe: bus: 1, device:
4 was
>>>> not an MTP device
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.683171] calling
>>>> usblp_driver_init+0x0/0x1000 [usblp] @ 20828
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.686903] usblp
>>>> 1-1:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid
>>>> 0x04A9 pid 0x176C
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.687808] usbcore:
>>>> registered new interface driver usblp
>>>> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.687817] initcall
>>>> usblp_driver_init+0x0/0x1000 [usblp] returned 0 after 4528 usecs
>>>>
>>>> (the serial number ist modified for security reasons)
>>>>
>>>> Do I have to install new sane-frontend software as well?
>>>> What can I do to provide you with useful informations to get it working
>>>> or at least to know that it would never work wit that version or setup?
>>>>
>>>> thanks
>>>>
>>>> Marcus
>>>>
>>>>
>>>
>>
>
>
>


- -- 
Marcus Wellnitz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=2kDO
-----END PGP SIGNATURE-----

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20140917/644ee87a/attachment.html>