[sane-devel] Fujitsu fi-65F : Image position

[m. allan noah]

The epjitsu backend was entirely reverse engineered without protocol
documentation. So it is certainly possible that there is some command
to change the image position, but I do not know it. If you could get a
protocol manual which lists the actual commands sent to the scanner,
we might be able to fix it.

allan

On Tue, Dec 8, 2015 at 5:55 AM, Tadasuke
<tadasuke.yoshida at uk.fujitsu.com> wrote:
> Hi Developers,
>
> I can scan an image using Fujitsu fi-65F on SANE backends 1.0.25.
> I also have Fujitsu fi-60F and can scan an image on same environment.
> Thanks. However, in comparison with these images acquired on default
> settings, image positions are different.
>
> Both of image size are same (1296 x 1749, 300dpi), but an image acquired by
> fi-65F is slipped to upper side about 5mm. As the result, top 5mm of
> document cannot be acquired. The bottom 5mm area of image is all black.
> Is there any parameter to scan from the top of document with fi-65F?
>
>
>
>
> --
> View this message in context: http://sane.10972.n7.nabble.com/Fujitsu-fi-65F-Image-position-tp20480.html
> Sent from the SANE - Dev mailing list archive at Nabble.com.
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org



-- 
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"