[sane-devel] pixma mg7500 testing

[Rolf Bensch]

Hi Jonathan,

Attached patch should fix the 1200 and 2400 dpi issue. This file patches
backend/pixma_mp150.c.

Please copy attached file into the folder backend/ and process from
inside backend/ this command: patch pixma_mp150.c pixma_mp150.c.patch1

Then 'cd ..' and 'make && sudo make install'.

Please report your results again.

If this patch is working, I'll update Sane's development sources.

Cheers,
Rolf

Am 24.07.2015 um 16:58 schrieb Jonathan Anderson:
> Hi, 
> 
> I've tested the sane-backends-git20150724 with Fedora 22.
> The scanner was correctly detected and scanned 600 dpi good as you said.
> It showed stripes on 1200 and 2400 just as you said.
> 
> Do you need to see the scans or can I give you any additional info to
> help you?
> 
> Kind regards
> Jonathan
> 
> ------------------------------------------------------------------------
> *From:* Rolf Bensch <rolf at bensch-online.de>
> *To:* Jonathan Anderson <emailjonathananderson-new at yahoo.com>
> *Cc:* "sane-devel at lists.alioth.debian.org"
> <sane-devel at lists.alioth.debian.org>
> *Sent:* Friday, July 24, 2015 9:08 AM
> *Subject:* Re: [sane-devel] pixma mg7500 testing
> 
> Hi Jonathan,
> 
> Please install SANE Development (git) Version as described in
> README.linux (I assume you're using Linux):
> http://www.sane-project.org/docs.html .
> 
> Then your scanner should scan up to 600dpi without any problems.
> 
> I assume that you'll see stripes on 1200 and 2400 dpi images, then I'll
> create a patch for your scanner. Please report your results.
> 
> Many thanks for your help.
> 
> Cheers,
> Rolf
> 
> Am 22.07.2015 um 16:48 schrieb Jonathan Anderson:
> 
> 
>> I'd be happy to help with the testing of a Canon Pixma MG7550.
>> Please tell me what to do.
>>
>> Kind regards
>> Jonathan
> 
> 
> 
-------------- next part --------------
--- ./pixma_mp150.c	2015-07-25 10:31:20.010100561 +0200
+++ ../sane-backends/backend/pixma_mp150.c	2015-07-25 10:33:42.442250855 +0200
@@ -1154,7 +1154,8 @@
               && s->cfg->pid != MG5500_PID
               && s->cfg->pid != MG6300_PID
               && s->cfg->pid != MG6400_PID
-              && s->cfg->pid != MG7100_PID)
+              && s->cfg->pid != MG7100_PID
+              && s->cfg->pid != MG7500_PID)
               reorder_pixels (mp->linebuf, sptr, c, n, m, s->param->wx, line_size);
           
           /* Crop line to selected borders */