[sane-devel] Fujitsu S1300i on RPi

[Gaggl, Leo]

Hi,

I have installed sane on a RaspberryPi Model B
http://www.splitbrain.org/blog/2014-08/23-paper_backup_1_scanner_setup
and followed
all steps and the scanner is recognised fine. But when I try to use
scanimage the document starts feeding but then fails with

scanimage: sane_start: Error during device I/O

I have been updating firmware as there were some reports that the dwc_otg
USB driver had some issues. Did you come across any issues like this ? Any
pointers would be much appreciated. Here is some more detailed debug output


[dll] sane_get_devices: found 1 devices
[dll] sane_open: trying to open `epjitsu:libusb:001:004'
[dll] sane_open: open successful
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=0)
[dll]
sane_control_option(handle=0x1f438c0,option=0,action=0,value=0xbe81e71c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=0)
[dll]
sane_control_option(handle=0x1f438c0,option=0,action=0,value=0xbe81c670,info=(nil))
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=1)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=2)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=3)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=4)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=5)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=6)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=7)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=8)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=9)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=10)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=11)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=12)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=13)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=14)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=15)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=16)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=17)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=18)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=19)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=20)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=21)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=22)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=23)
[dll] sane_get_option_descriptor(handle=0x1f438c0,option=24)
[dll] sane_start(handle=0x1f438c0)
scanimage: sane_start: Error during device I/O
[dll] sane_cancel(handle=0x1f438c0)
[dll] sane_close(handle=0x1f438c0)
[dll] sane_exit: exiting

Thanks in advance,
Leo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20150322/5c2e8989/attachment.html>