[sane-devel] root can scan, user not...
m. allan noah
kitno455 at gmail.com
Tue Oct 20 15:48:14 UTC 2015
Probably the scanner is not owned by scanner group. You need to check
the udev/hal/whatever rules and make sure this scanner is listed.
On Tue, Oct 20, 2015 at 10:09 AM, Thomas Dahlén
<erikthomasdahlen at gmail.com> wrote:
> On 2015-10-20 15:34, Olaf Meeuwissen wrote:
> Thomas Dahlén writes:
> i have a Fujitsu fi -7160 and the latest version of Debian jessie installed.
> thomas at ws2:~$ sudo chmod 666 /dev/bus/usb/003/002
> [sudo] password for thomas:
> thomas at ws2:~$ scanimage --device-name=fujitsu --format tiff >
> now it works but is there a better way to solve the problem permanently
> than to chmod after start.
> Add yourself to the scanner group as below, log out and back in again.
> sudo adduser thomas scanner
> Hope this helps,
> I am already in the scanner group:
> "I check /etc/group
> - - - - - - - - - - -
> Thomas Dahlén
> 070-710 64 54
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"
More information about the sane-devel