[sane-devel] Problem with the Epson DS-560 using the epsonds backend
Thorben Schröder
info at thorbenschroeder.de
Tue Apr 5 12:51:30 UTC 2016
Ha, this solved it! Thank you so much!
Thorben Schröder Softwareentwicklung
Am Hohen Stege 10
21029 Hamburg / Germany
Fon: +49-176-23550687
thorbenschroeder.de
On Tue, Apr 5, 2016 at 2:07 PM, m. allan noah <kitno455 at gmail.com> wrote:
> This looks like the typical Linux USB problem, try using a
> sane-backends git snapshot. http://www.sane-project.org/snapshots/
>
> allan
>
> On Tue, Apr 5, 2016 at 7:58 AM, Thorben Schröder
> <info at thorbenschroeder.de> wrote:
> > Hey! I've a question regarding the epsonds backend. I'm trying to get my
> > scanner working with the latest 1.0.25 release of sane-backends. I got
> it to
> > a point where it now finds the scanner once when using
> >
> > scanimage -L
> >
> > but after that it doesn't find the scanner ever again until I unplug and
> > plug it back again (USB).
> >
> > Here is the debugging output of the scanimage -L command I've used
> > (https://gist.github.com/walski/7117f69c9e70b1733c6b14c928050ada):
> >
> > # First Run:
> >
> >> sudo SANE_DEBUG_EPSONDS=128 scanimage -L
> >> [sanei_debug] Setting debug level of epsonds to 128.
> >> [epsonds] sane_epsonds_init: sane-backends 1.0.25
> >> [epsonds] epsonds backend, version 1.0.35
> >> [epsonds] ** sane_epsonds_get_devices
> >> [epsonds] probe_devices
> >> [epsonds] attach_one_config: len = 15, line = usb 0x4b8 0x150
> >> [epsonds] user configured device
> >> [epsonds] attach_one_usb: dev = libusb:001:006
> >> [epsonds] attach: devname = libusb:001:006, type = 1
> >> [epsonds] device_detect
> >> [epsonds] open_scanner: libusb:001:006
> >> [epsonds] opened correctly
> >> [epsonds] eds_lock
> >> [epsonds] eds_control: size = 2
> >> [epsonds] eds_send: size = 2
> >> [epsonds] eds_send: FS X
> >> [epsonds] eds_recv: size = 1, buf = 0x7eacc1ff
> >> [epsonds] = gathering device information
> >> [epsonds] esci2_cmd: INFOx0000000 len 12, payload len: 0
> >> [epsonds] eds_send: size = 12
> >> [epsonds] eds_recv: size = 64, buf = 0x7eacc1b0
> >> [epsonds] info_cb: nrd / NONE / 4
> >> [epsonds] eds_recv: size = 256, buf = 0x1e69ce8
> >> [epsonds] info_cb: ADF / TYPEFEED / 8
> >> [epsonds] ADF: sheet feed type
> >> [epsonds] info_cb: ADF / DPLX1SCN / 8
> >> [epsonds] ADF: duplex single pass
> >> [epsonds] info_cb: ADF / FORDPF1N / 8
> >> [epsonds] ADF: order is 1 to N
> >> [epsonds] info_cb: ADF / ALGNCNTR / 8
> >> [epsonds] ADF: center aligned
> >> [epsonds] info_cb: ADF / AREAi0000850i0001400 / 20
> >> [epsonds] ADF: area 850x1400 @ 100dpi
> >> [epsonds] info_cb: ADF / AMINi0000200i0000205 / 20
> >> [epsonds] ADF: min 200x205 @ 100dpi
> >> [epsonds] info_cb: ADF / AMAXi0000850i0003600 / 20
> >> [epsonds] ADF: max 850x3600 @ 100dpi
> >> [epsonds] eds_set_adf_area: 0.000000,0.000000 215.899994,914.399994 100
> >> [mm]
> >> [epsonds] info_cb: ADF / RESOi0000600 / 12
> >> [epsonds] ADF: basic resolution is 600 dpi
> >> [epsonds] info_cb: ADF / RCVR / 4
> >> [epsonds] ADF: auto recovery
> >> [epsonds] info_cb: ADF / OVSNd000d039 / 12
> >> [epsonds] ADF: overscan 0x39 @ 100dpi
> >> [epsonds] info_cb: IMX / x000FFFFx000FFFF / 16
> >> [epsonds] info_cb: PRD / h008DS-560 / 12
> >> [epsonds] product: DS-560
> >> [epsonds] info_cb: VER / h010IPL 1.00ADF 1.05 / 20
> >> [epsonds] version: IPL 1.00ADF 1.05
> >> [epsonds] info_cb: DSZ / i0001536 / 8
> >> [epsonds] info_cb: DLS / / 0
> >> [epsonds] info_cb: S/N / h00AU6NZ019428 / 14
> >> [epsonds] serial: U6NZ019428
> >> [epsonds] esci2_cmd: CAPAx0000000 len 12, payload len: 0
> >> [epsonds] eds_send: size = 12
> >> [epsonds] eds_recv: size = 64, buf = 0x7eacc1c0
> >> [epsonds] capa_cb: nrd / NONE / 4
> >> [epsonds] eds_recv: size = 228, buf = 0x1e69ce8
> >> [epsonds] capa_cb: ADF / DPLX / 4
> >> [epsonds] ADF: duplex
> >> [epsonds] capa_cb: ADF / DFL1DFL2 / 8
> >> [epsonds] ADF: double feed detection (high sensitivity)
> >> [epsonds] capa_cb: ADF / EJCT / 4
> >> [epsonds] ADF: paper eject
> >> [epsonds] capa_cb: ADF / OVSN / 4
> >> [epsonds] ADF: overscan
> >> [epsonds] capa_cb: COL / LISTC024M001M008R001R008G001G008B001B008 / 40
> >> [epsonds] capa_cb: FMT / LISTJPG / 8
> >> [epsonds] capa_cb: JPG / RANGd001d100 / 12
> >> [epsonds] capa_cb: THR / RANGd000d255 / 12
> >> [epsonds] capa_cb: GMM / LISTUG10UG18 / 12
> >> [epsonds] capa_cb: GMT / LISTRED GRN BLU MONO / 20
> >> [epsonds] capa_cb: CMX / LISTUNITUM08 / 12
> >> [epsonds] capa_cb: RSM / LISTi0000300i0000600 / 20
> >> [epsonds] eds_add_resolution: add (dpi): 300
> >> [epsonds] eds_add_resolution: add (dpi): 600
> >> [epsonds] capa_cb: RSS / LISTi0000300i000060 / 19
> >> [epsonds] esci2_cmd: RESAx0000000 len 12, payload len: 0
> >> [epsonds] eds_send: size = 12
> >> [epsonds] eds_recv: size = 64, buf = 0x7eacc1c0
> >> [epsonds] resa_cb: nrd / NONE / 4
> >> [epsonds] resa_cb: par / OK / 4
> >> [epsonds] eds_recv: size = 1184, buf = 0x1e69ce8
> >> [epsonds] resa_cb: ADF / / 0
> >> [epsonds] resa_cb: COL / M001 / 4
> >> [epsonds] resa_cb: FMT / JPG / 4
> >> [epsonds] resa_cb: JPG / d090 / 4
> >> [epsonds] resa_cb: THR / d128 / 4
> >> [epsonds] resa_cb: GMM / UG10 / 4
> >> [epsonds] resa_cb: $%& /
> >>
> '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????BLU
> >> h100 / 225
> >> [epsonds] resa_cb: $%& /
> >>
> '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????MONOh100
> >> / 225
> >> [epsonds] resa_cb: $%& /
> >>
> '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
> >> / 217
> >> [epsonds] resa_cb: CMX / UNIT / 4
> >> [epsonds] resa_cb: BSZ / i0065536 / 8
> >> [epsonds] resa_cb: PAG / d000 / 4
> >> [epsonds] resa_cb: RSM / d300 / 4
> >> [epsonds] resa_cb: RSS / d300 / 4
> >> [epsonds] resa_cb: ACQ / i0000000i0000000i0002550i000420 / 31
> >> [epsonds] eds_add_depth: add (bpp): 1
> >> [epsonds] eds_add_depth: add (bpp): 8
> >> [epsonds] eds_dev_post_init
> >> [epsonds] scanner model: DS-560
> >> [epsonds] close_scanner: fd = 0
> >> [epsonds] unlocking scanner
> >> [epsonds] esci2_fin
> >> [epsonds] esci2_cmd: FIN x0000000 len 12, payload len: 0
> >> [epsonds] eds_send: size = 12
> >> [epsonds] eds_recv: size = 64, buf = 0x7eacc1c8
> >> [epsonds] close_scanner: ZZZ
> >> [epsonds] sane_epsonds_get_devices - results:
> >> [epsonds] 0 (1): DS-560
> >> device `epsonds:libusb:001:006' is a Epson DS-560 ESC/I-2
> >> [epsonds] ** sane_epsonds_exit
> >
> >
> >
> > # Subsequent runs
> >
> >> sudo SANE_DEBUG_EPSONDS=128 scanimage -L
> >> [sanei_debug] Setting debug level of epsonds to 128.
> >> [epsonds] sane_epsonds_init: sane-backends 1.0.25
> >> [epsonds] epsonds backend, version 1.0.35
> >> [epsonds] ** sane_epsonds_get_devices
> >> [epsonds] probe_devices
> >> [epsonds] attach_one_config: len = 15, line = usb 0x4b8 0x150
> >> [epsonds] user configured device
> >> [epsonds] attach_one_usb: dev = libusb:001:006
> >> [epsonds] attach: devname = libusb:001:006, type = 1
> >> [epsonds] device_detect
> >> [epsonds] open_scanner: libusb:001:006
> >> [epsonds] opened correctly
> >> [epsonds] eds_lock
> >> [epsonds] eds_control: size = 2
> >> [epsonds] eds_send: size = 2
> >> [epsonds] eds_send: FS X
> >> [epsonds] eds_recv: size = 1, buf = 0x7ec591ff
> >> [epsonds] eds_recv: expected = 1, got = 0, canceling: 0
> >> [epsonds] eds_txrx: rx err, Error during device I/O
> >> [epsonds] eds_control: failed, Error during device I/O
> >> [epsonds] failed
> >> [epsonds] close_scanner: fd = 0
> >> [epsonds] close_scanner: ZZZ
> >> [epsonds] sane_epsonds_get_devices - results:
> >>
> >> No scanners were identified. If you were expecting something different,
> >> check that the scanner is plugged in, turned on and detected by the
> >> sane-find-scanner tool (if appropriate). Please read the documentation
> >> which came with this software (README, FAQ, manpages).
> >> [epsonds] ** sane_epsonds_exit
> >
> >
> >
> > The problem seems to appear somewhere around line 17 of the second run
> when
> > it seems to send some command to the scanner but receives an unexpected
> > result :/
> >
> > Any idea on how to proceed to make this work again?
> >
> > Thanks so much,
> >
> > Thorben
> >
> > --
> > sane-devel mailing list: sane-devel at lists.alioth.debian.org
> > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> > Unsubscribe: Send mail with subject "unsubscribe your_password"
> > to sane-devel-request at lists.alioth.debian.org
>
>
>
> --
> "well, I stand up next to a mountain- and I chop it down with the edge
> of my hand"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20160405/59f41c72/attachment-0001.html>
More information about the sane-devel
mailing list