[sane-devel] Test of HP ScanJet N6310

[Peter Watson]

Hi,
I recently acquired a HP ScanJet N6310 (for cheap, yea!) and I've been
trying to get it to work with my Arch Linux desktop.

I haven't made much progress.  Here's what I've done:

% scanimage -L
> device `genesys:libusb:002:009' is a Hewlett Packard ScanJet N6310 flatbed
> scanner
>


> % scanimage -T
> [genesys] WARNING: Your scanner is not fully supported or at least
> [genesys]          had only limited testing. Please be careful and
> [genesys]          report any failure/success to
> [genesys]          sane-devel at lists.alioth.debian.org. Please provide as
> many
> [genesys]          details as possible, e.g. the exact name of your
> [genesys]          scanner and what does (not) work.
> scanimage: open of device genesys:libusb:002:009 failed: Invalid argument


Running scanimage verbosely doesn't seem to effect this output.

Just to be safe I've commented out all the backends besides genesys in
/etc/sane.d/dll.conf and I've checked to make sure that the HP ScanJet
N6310 entry in /etc/sane.d/genesys.conf is not commented out and matches
the output of lsusb.  But no change in behavior so far.

% lsusb
> Bus 002 Device 006: ID 05ac:9223 Apple, Inc.
> Bus 002 Device 004: ID 05ac:9131 Apple, Inc.
> Bus 002 Device 008: ID 04f2:0939 Chicony Electronics Co., Ltd
> Bus 002 Device 007: ID 0714:0003 NewMotion, Inc. ADB converter
> Bus 002 Device 005: ID 046d:0821 Logitech, Inc. HD Webcam C910
> Bus 002 Device 009: ID 03f0:4705 Hewlett-Packard
> Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
> Bus 002 Device 002: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader
> Controller
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> % lsusb -t
> /:  Bus 09.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
>     |__ Port 3: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M
>     |__ Port 3: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid,
> 480M
>     |__ Port 7: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
>         |__ Port 1: Dev 9, If 0, Class=Vendor Specific Class, Driver=, 480M
>         |__ Port 2: Dev 5, If 0, Class=Audio, Driver=snd-usb-audio, 480M
>         |__ Port 2: Dev 5, If 1, Class=Audio, Driver=snd-usb-audio, 480M
>         |__ Port 2: Dev 5, If 2, Class=Video, Driver=uvcvideo, 480M
>         |__ Port 2: Dev 5, If 3, Class=Video, Driver=uvcvideo, 480M
>         |__ Port 3: Dev 7, If 0, Class=Human Interface Device,
> Driver=usbhid, 1.5M
>         |__ Port 3: Dev 7, If 1, Class=Human Interface Device,
> Driver=usbhid, 1.5M
>         |__ Port 4: Dev 8, If 0, Class=Human Interface Device,
> Driver=usbhid, 1.5M
>     |__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/3p, 480M
>         |__ Port 2: Dev 6, If 0, Class=Human Interface Device,
> Driver=usbhid, 12M
> /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M



Let me know what to try out.  Thanks!

Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20160819/146f0dd4/attachment.html>