[sane-devel] [Scanbd] Set up for Canon PIXMA multifunction scanner - no button response
liquefry at gmail.com
Tue Oct 25 05:04:05 UTC 2016
More testing - checking permissions to the scanner:
[matt at localhost sane.d]$ lsusb
Bus 002 Device 005: ID 04a9:174b Canon, Inc. (plus others)
[matt at localhost sane.d]$ ls -l /dev/bus/usb/002/005
crw-rw-r-- 1 root lp 189, 132 Oct 25 15:47 /dev/bus/usb/002/005
It looks like root and group "lp" have read write access to the
scanner. So I added both me and the "saned" user is in the lp group.
But I still can't get scanimage -L to pick up the USB connection
without sudo access.
Don't know if this is useful extra info or not!
On Tue, Oct 25, 2016 at 3:31 PM, matt clark <liquefry at gmail.com> wrote:
> Hi again, after the last test I reinstalled sane without the scanbd
> bits, want to see if I can get this working without it. The output
> from the command above is at http://pastebin.com/1h6gDTQV
> It looks from that as though sane is picking up both the network
> connection to the scanner/printer and the USB connection. Not sure if
> that helps diagnose? If I run the same command without sudo access it
> doesn't pick up the USB version.
> On Tue, Oct 25, 2016 at 3:12 PM, matt clark <liquefry at gmail.com> wrote:
>> Hi Rolf, thanks for replying - sorry I missed it last week. The
>> response to that command (running as su) is
>> scanimage: no SANE devices found
>> I am guessing it's something wrong with the scanbd setup since I can
>> see that it's installed using the /usr/local/etc/scanbd/sane.d config
>> file. The only line that is not commented out in my
>> /etc/sane.d/saned.conf file is
>> Would appreciate your thoughts.
More information about the sane-devel