[sane-devel] Canon Pixma G2000 support

[Thierry HUCHARD]

Le 2017-08-07 20:25, Iam Droidzone a écrit :
> Sorry I meant canon_dr.conf, not canon_pp.conf. The former is where I
> have tried inserting the line, after doing it in pixma.conf didnt work
> 
> On Mon, Aug 7, 2017 at 11:25 PM, Thierry HUCHARD
> <thierry at substantiel.fr> wrote:
> 
>> Le 2017-08-07 18:28, Iam Droidzone a écrit :
>> 
>>> I've been trying to get the Canon Pixma G2000 to work with Ubuntu
>>> 16.04.
>>> 
>>> I tried:
>>> 
>>> sane-find-scanner
>>> 
>>> # sane-find-scanner will now attempt to detect your scanner. If
>>> the
>>> # result is different from what you expected, first make sure
>>> your
>>> # scanner is powered up and properly connected to your computer.
>>> 
>>> # No SCSI scanners found. If you expected something different,
>>> make
>>> sure that
>>> # you have loaded a kernel SCSI driver for your SCSI adapter.
>>> 
>>> could not fetch string descriptor: Pipe error
>>> could not fetch string descriptor: Pipe error
>>> found USB scanner (vendor=0x04a9 [Canon], product=0x1795 [G2000
>>> series]) at libusb:001:010
>>> could not fetch string descriptor: Pipe error
>>> could not fetch string descriptor: Pipe error
>>> # Your USB scanner was (probably) detected. It may or may not be
>>> supported by
>>> # SANE. Try scanimage -L and read the backend's manpage.
>>> # Not checking for parallel port scanners.
>>> 
>>> # Most Scanners connected to the parallel port or other
>>> proprietary
>>> ports
>>> 
>>> # can't be detected by this program.
>>> 
>>> On trying scanimage -L:
>>> 
>>> No scanners were identified. If you were expecting something
>>> different,
>>> check that the scanner is plugged in, turned on and detected by
>>> the
>>> sane-find-scanner tool (if appropriate). Please read the
>>> documentation
>>> which came with this software (README, FAQ, manpages).
>>> root at hp:/etc/sane.d# gedit /usr/local/etc/sane.d/dll.conf
>>> 
>>> systemctl status saned.socket:
>>> ● saned.socket - saned incoming socket
>>> Loaded: loaded (/lib/systemd/system/saned.socket; enabled;
>>> vendor
>>> preset: enabled)
>>> Active: active (listening) since Mon 2017-08-07 21:16:38 IST;
>>> 28min
>>> ago
>>> Listen: [::]:6566 (Stream)
>>> Accepted: 0; Connected: 0
>>> Aug 07 21:16:38 hp systemd[1]: Listening on saned incoming socket.
>>> 
>>> Aug 07 21:34:26 hp systemd[1]: Listening on saned incoming socket.
>>> 
>>> The printing function is working with gutenprint. If only scanning
>>> too
>>> worked, I could finally get Windows off the partition!
>>> 
>>> Could anyone tell me if it's possible to tweak up support for this
>>> printer? I can provide logs for anything needed. It's a simple
>>> flatbed
>>> usb scanner on a multifunction printer.
>>> 
>>> -Droidzone
>> 
>> You may want to try the following line in /etc/sane.d/pixma.conf:
>> usb 0x04a9 0x1795


usb 0x04a9 0x1795
Normalement c'est le backend pixma que vous devez utiliser.
Par conséquent la ligne doit seulement être ajouter dans pixma.conf
Regarder dans /etc/sane.d/dll.conf
#pixma
remplacer par
pixma