[sane-devel] Testing Canon TS5000
Thierry HUCHARD
thierry at substantiel.fr
Fri Aug 18 11:30:14 UTC 2017
Le 2017-08-18 13:21, Javier Perez a écrit :
> Hi Thiery.
>
> Installed both scangearmp2-3.40-2.x86_64.rpm and
> scangearmp2-debuginfo-3.40-2.x86_64.rpm
>
> on a new virtual FC26 system.
>
> When I try scangearmp2, it cannot locate the scanner. I turned off the
> firewall just in case but still It cannot locate the scanner. I can
> ping the scanner without any problem.
>
> If I try scangearmp2 from my regular system, It sees it at once using
> scangear 3.40
>
> What should I try?
>
> JP
>
> On Thu, Aug 17, 2017 at 4:47 AM, Thierry HUCHARD
> <thierry at substantiel.fr> wrote:
>
>> Le 2017-08-16 07:40, Javier Perez a écrit :
>>
>> Hi.
>> Got the files.
>> I'll test them tomorrow
>> I'll let you know how they worked out.
>>
>> JP
>>
>> On Tue, Aug 15, 2017 at 6:07 AM, Thierry HUCHARD
>> <thierry at substantiel.fr> wrote:
>>
>> Le 2017-08-15 06:22, Javier Perez a écrit :
>>
>> Hih
>>
>> According to the Supported Devices webpage, you need testers for
>> the
>> Canon TS5010
>>
>> I have one and indeed it does not work through SANE, but it works
>> fine
>> with scangearmp2 Version 3.40
>>
>> I am using Fedora 26, and I recently upgraded to the 1.0.27
>> backends
>>
>> How can I help?
>>
>> --
>> ------------------------------
>> /\_/\
>> |O O| pepebuho at gmail.com
>> ~~~~ Javier Perez
>> ~~~~ While the night runs
>> ~~~~ toward the day...
>> m m Pepebuho watches
>> from his high perch.
>> Hello,
>> Here is a version of scangearmp2 edit:
>> https://github.com/Ordissimo/scangearmp2 [1] [1]
>> I just builder for Fedora 26. I let you test.
>> Active backends :
>> sudo echo "canon_pixma" >> /etc/sane.d/dll.conf # for activate the
>> backend in sane
>
> --
> ------------------------------
> /\_/\
> |O O| pepebuho at gmail.com
> ~~~~ Javier Perez
> ~~~~ While the night runs
> ~~~~ toward the day...
> m m Pepebuho watches
> from his high perch.
>
> Links:
> ------
> [1] https://github.com/Ordissimo/scangearmp2 [1]
>
> Hello,
> We just released our first release.
> You will find the updated packages for your distribution on the git:
> https://github.com/Ordissimo/scangearmp2/releases [2]
>
> --
> ------------------------------
> /\_/\
> |O O| pepebuho at gmail.com
> ~~~~ Javier Perez
> ~~~~ While the night runs
> ~~~~ toward the day...
> m m Pepebuho watches
> from his high perch.
>
> Links:
> ------
> [1] https://github.com/Ordissimo/scangearmp2
> [2] https://github.com/Ordissimo/scangearmp2/releases
Hi,
Have you run the line, below?
sudo echo "canon_pixma" >> /etc/sane.d/dll.conf # for activate the
More information about the sane-devel
mailing list