[sane-devel] Reflecta RPS 7200

[Julian Hauser]

On Thu, 01.06.17 16:59, Klaus Kaempf wrote:
>* Julian Hauser <julian at julianhauser.com> [Jun 01. 2017 11:20]:

>> It does seem to fail at a different point now.
>
>Yes, indeed
>
>> If I look at the logs there does seem to be (though my interpretation
>> might be totally off) some calibration info coming from the scanner
>> (starting at around line 8034), but it then fails just after at
>> "sanei_pieusb_cmd_get_scanned_lines". Any idea what could be the cause
>> of this?
>
>Your scanner needs a (slightly?) different protocol than the other
>(pieusb-based) Reflecta scanners.
>
>Getting this right is a larger operation, involving VirtualBox,
>Windows (with the original Reflecta driver), USB port forwarding, and
>a lot of USB debugging.
>
>All doable, but might need *a lot* of time.

I would be up for doing the testing etc., if you're interested in trying
to get this scanner to work. I can set up VirtualBox with the CyberView
software, which shouldn't be too hard. I've never done USB debugging but
if you point me in the right direction, I should be able to do it.
>
>Klaus