[sane-devel] Canon Pixma MG5450 works fine

[Olaf Meeuwissen]

Hi Christian,

Thanks for the feedback.

Christian Weiske writes:

>> [...]
>> I'm assuming you are talking about the entry fro Pixma MG5400 Series.
>> Is that correct?
>
> Yes.
>
>> Also, how would you rate the support based on the following (from the
>> doc/descriptions.txt file):
>>
>>   `:untested' means the device may be supported but couldn't be
>>   tested. `:minimal' means that the device is detected and scans at
>>   least in one mode. But the quality is bad or important features
>> won't work. `:basic' means it works at least in the most important
>> modes but quality is not perfect. `:good' means the device is usable
>> for day-to-day work. Some rather exotic features may be
>>   missing. `:complete' means the backends supports everything the
>> device can do.
>
> It's "good". I don't know about complete since I only scanned a few
> documents.

Updating descriptions/pixma.desc, I noticed that most of the MG* Series
have a comment about the (maximum) resolution(s) that work okay.  If you
have any info on that I'll add that before I push the changes.

Hope this helps,
--
Olaf Meeuwissen, LPIC-2            FSF Associate Member since 2004-01-27
 GnuPG key: F84A2DD9/B3C0 2F47 EA19 64F4 9F13  F43E B8A4 A88A F84A 2DD9
 Support Free Software                        https://my.fsf.org/donate
 Join the Free Software Foundation              https://my.fsf.org/join