[sane-devel] CanoScan 9000F not recognized on Lubuntu

[m. allan noah]

What version number of libsane?

allan

On Fri, Mar 31, 2017 at 1:57 AM, Jonathan Barés
<Jonathan.bares at umontpellier.fr> wrote:
> Hi Allan,
>
> Yes it is libsane.
>
> Thanks,
>
> Jonathan
>
>
>
> Le 30/03/2017 à 22:24, m. allan noah a écrit :
>>
>> What version of sane-backends are you running? It might be called
>> libsane on your system.
>>
>> allan
>>
>> On Thu, Mar 30, 2017 at 3:04 PM, Jonathan Barés
>> <Jonathan.bares at umontpellier.fr> wrote:
>>>
>>> Hi all,
>>>
>>> After googling for hours I still do not understand why my CanoScan 9000F
>>> MarkII is not recognized by my Lubuntu computer (14.04 kernel) and am
>>> hoping
>>> some of you could help with this.
>>>
>>> When I run sane-find-scanner I get:
>>>
>>>    # sane-find-scanner will now attempt to detect your scanner. If the
>>>    # result is different from what you expected, first make sure your
>>>    # scanner is powered up and properly connected to your computer.
>>>
>>>    # No SCSI scanners found. If you expected something different, make
>>> sure
>>> that
>>>    # you have loaded a kernel SCSI driver for your SCSI adapter.
>>>
>>>    # No USB scanners found. If you expected something different, make
>>> sure
>>> that
>>>    # you have loaded a kernel driver for your USB host controller and
>>> have
>>> setup
>>>    # the USB system correctly. See man sane-usb for details.
>>>    # SANE has been built without libusb support. This may be a reason
>>>    # for not detecting USB scanners. Read README for more details.
>>>
>>>    # Not checking for parallel port scanners.
>>>
>>>    # Most Scanners connected to the parallel port or other proprietary
>>> ports
>>>    # can't be detected by this program.
>>>
>>>    # You may want to run this program as root to find all devices. Once
>>> you
>>>    # found the scanner devices, be sure to adjust access permissions as
>>>    # necessary.
>>>
>>> I have tried to add the rule:
>>> # Canon CanoScan 9000F Mark II
>>> ATTR{idVendor}=="04a9", ATTR{idProduct}=="190d", MODE="0664",
>>> GROUP="scaner", ENV{libsane_matched}="yes
>>> in /etc/udev/rules.d/50-CanonScan.rules but still get the same problem.
>>>
>>> I am really surprised because the scanner seems to be seen by the
>>> computer
>>> when I run lsusb:
>>> Bus 002 Device 002: ID 04a9:190d Canon, Inc. CanoScan 9000F Mark II
>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 003 Device 003: ID 1c4f:0048 SiGma Micro
>>> Bus 003 Device 002: ID 413c:2107 Dell Computer Corp.
>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>
>>> Here is also my version of sane:
>>> xsane-0.998 (c) 1998-2010 Oliver Rauch
>>>    Courrier électronique : Oliver.Rauch at xsane.org
>>>    paquet xsane-0.996
>>>    compilé avec GTK-2.24.18
>>>    avec fonction de gestion de la couleur
>>>    avec support GIMP, compilé avec GIMP-2.8.4
>>>    Formats de sortie de XSane : jpeg, pdf(compr.), png, pnm, ps(compr.),
>>> tiff, txt
>>>
>>> If anybody has an idea of what is happening I would be extremelly happy
>>> to
>>> have some help.
>>> I thank you in advance.
>>> Best,
>>> Jonathan
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>               to sane-devel-request at lists.alioth.debian.org
>>
>>
>>
>



-- 
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"