[sane-devel] Reflecta RPS 7200

[Julian Hauser]

Hello, thanks for the help! :)

I don't seem to get any output of the sort you describe:

% SANE_DEBUG_PIEUSB=14 scanimage
[sanei_debug] Setting debug level of pieusb to 14.
[pieusb] sane_init() build 1
[pieusb] sane_init() config file parsing usb 0x05e3 0x0145 0x47 0x00
[pieusb] sane_init() config file lists device 05e3 0145 47 00
[pieusb] sane_init() adding device 05e3 0145 47 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 003: 05e3 0145 30 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 003: 05e3 0145 36 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 003: 05e3 0142 3a 01
[pieusb] sanei_pieusb_supported_device_list_add(): current 003: 0000 0000 00 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 003: 05e3 0145 30 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 003: 05e3 0145 36 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 003: 05e3 0142 3a 01
[pieusb] sanei_pieusb_supported_device_list_add() add: 003: 05e3 0145 47 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 003: 0000 0000 00 00
[pieusb] sane_init() config file parsing usb 0x05e3 0x0145 0x2e 0x00
[pieusb] sane_init() config file lists device 05e3 0145 2e 00
[pieusb] sane_init() adding device 05e3 0145 2e 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 004: 05e3 0145 30 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 004: 05e3 0145 36 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 004: 05e3 0142 3a 01
[pieusb] sanei_pieusb_supported_device_list_add(): current 004: 05e3 0145 47 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 004: 0000 0000 00 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 004: 05e3 0145 30 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 004: 05e3 0145 36 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 004: 05e3 0142 3a 01
[pieusb] sanei_pieusb_supported_device_list_add() add: 004: 05e3 0145 47 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 004: 05e3 0145 2e 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 004: 0000 0000 00 00
[pieusb] sane_init() config file parsing usb 0x05e3 0x0142 0x2f 0x00
[pieusb] sane_init() config file lists device 05e3 0142 2f 00
[pieusb] sane_init() adding device 05e3 0142 2f 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 005: 05e3 0145 30 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 005: 05e3 0145 36 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 005: 05e3 0142 3a 01
[pieusb] sanei_pieusb_supported_device_list_add(): current 005: 05e3 0145 47 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 005: 05e3 0145 2e 00
[pieusb] sanei_pieusb_supported_device_list_add(): current 005: 0000 0000 00 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 005: 05e3 0145 30 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 005: 05e3 0145 36 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 005: 05e3 0142 3a 01
[pieusb] sanei_pieusb_supported_device_list_add() add: 005: 05e3 0145 47 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 005: 05e3 0145 2e 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 005: 05e3 0142 2f 00
[pieusb] sanei_pieusb_supported_device_list_add() add: 005: 0000 0000 00 00
[pieusb] sane_init() looking for scanner 05e3 0145 model 30, flags 00
[pieusb] sane_init() looking for scanner 05e3 0145 model 36, flags 00
[pieusb] sane_init() looking for scanner 05e3 0142 model 3a, flags 01
[pieusb] sane_init() looking for scanner 05e3 0145 model 47, flags 00
[pieusb] sane_init() looking for scanner 05e3 0145 model 2e, flags 00
[pieusb] sane_init() looking for scanner 05e3 0142 model 2f, flags 00
[pieusb] sane_get_devices
scanimage: no SANE devices found
[pieusb] sane_exit()

On Wed, 31.05.17 10:29, Klaus Kaempf wrote:
>* Julian Hauser <julian at julianhauser.com> [May 31. 2017 00:06]:
>> Hello,

>> I'm trying the get the Reflecta RPS 7200 to work with pieusb, so far
>> with little success.

>> I can find the scanner with sane-find-scanner:

>> - "found USB scanner (vendor=0x05e3, product=0x0144) at libusb:001:014"
>
>Good, you already have two of the three required values.
>

>> I want to add a relevant line to pieusb.conf, but I require the model
>> number for this as well, which I do not know. scanimage -L in debug mode
>> does not find the scanner nor show me any info about it (it only lists
>> the scanners enabled by default and the ones listed in the config file).
>
>Run scanimage with
>
>  SANE_DEBUG_PIEUSB=14 scanimage
>

>> Do you know how I could find the model number?
>
>Look for this line in the output:
>
>  [pieusb] INQUIRY:
>
>followed by something like
>
>  [pieusb] vendor........................: 'PIE'
>  [pieusb] product.......................: 'SF Scanner'
>  [pieusb] model  .......................: 0x0036
>  [pieusb] version.......................: '1.70'
>
>Now edit pieusb.conf and add a line with
>
>usb 0x05e3 0x0144 0x36 0x00
>
>(vendor, product, model, 0x00)
>
>and run scanimage again.
>

>> Also, this scanner supports automatic transport of film (but not
>> slides). Should I enable "has-slide-transport" in the config file or
>> not?
>
>If scanning works in general, change the trailing 0x00 in pieusb.conf
>with 0x01. This enables automatic slide transport.
>
>Good luck ! ;-)
>
>Klaus