[sane-devel] Reflecta RPS 7200

[Julian Hauser]

On Wed, 31.05.17 15:23, Klaus Kaempf wrote:
>* Julian Hauser <julian at julianhauser.com> [May 31. 2017 15:15]:
>> On Wed, 31.05.17 14:39, Klaus Kaempf wrote:
>> > * Julian Hauser <julian at julianhauser.com> [May 31. 2017 12:01]:
>> > > Great, that did it! The model number is 0x31. I've tried doing a test
>> > > scan but am getting an I/O error.

>> > > Here's the log: https://pastebin.com/rr8j0gaN

>> I've also tried scanning with pieusb debug on, here's the result:
>> https://pastebin.com/UrkjBX7j
>
>You need to run through the scanner calibration once after every
>power-up of the scanner.
>
>You're trying to scan without calibration and the scanner complains with
>"Calibration disable not granted". Try with "xsane".

Do you mean the calibration the scanner does when I turn it on? I
(thought I) waited until that was done (I always wait until after the
calibration noises end). Or is there some calibration that I actively
need to do? I tried with xsane, it seems to give me the same error:
https://pastebin.com/RqTiiX9p

>
>
>Klaus