[sane-devel] PIXMA backend Canon i-SENSYS MF633cdw Support

[Rolf Bensch]

Hi Wojciech,

Please provide a logfile created with:

$ SANE_DEBUG_PIXMA=4 scanimage 2> pixma.log > pixma.pnm

Please zip, tar.gz or 7zip pixma.log and send it to me.

Cheers,
Rolf


Am 22.01.2018 um 03:29 schrieb Wojciech Teichert:
>  scanimage -L
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> root@### sane-find-scanner
>
>   # sane-find-scanner will now attempt to detect your scanner. If the
>   # result is different from what you expected, first make sure your
>   # scanner is powered up and properly connected to your computer.
>
>   # No SCSI scanners found. If you expected something different, make
> sure that
>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04a9 [Canon], product=0x27e1
> [MF633C/635C]) at libusb:001:005
>   # Your USB scanner was (probably) detected. It may or may not be
> supported by
>   # SANE. Try scanimage -L and read the backend's manpage.
>
>   # Not checking for parallel port scanners.
>
>   # Most Scanners connected to the parallel port or other proprietary
> ports
>   # can't be detected by this program.
> root@### scanimage -L
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages)
>
> This is new version from git://git.debian.org/sane/sane-backends.git
> <http://git.debian.org/sane/sane-backends.git> using ./configure
> --prefix=/usr --libdir=/usr/lib/x86_64-linux-gnu --sysconfdir=/etc
> --localstatedir=/var --enable-avahi && make -j4
>
> 2018-01-03 21:09 GMT+01:00 Rolf Bensch <rolf at bensch-online.de
> <mailto:rolf at bensch-online.de>>:
>
>     Hi Wojtek,
>
>     I just added your scanner to SANE. Please check out the recent version
>     from git or you can use the daily git snapshot tomorrow.
>
>     Please report if all scanning features (75-600dpi, simple and duplex
>     document feeder) are running with USB. After this you can try the bjnp
>     interface.
>
>     Hope this helps.
>
>     Cheers,
>     Rolf
>
>
>     Am 13.12.2017 um 09:58 schrieb Wojtek Teichert:
>     >  Can you add support for Canon i-SENSYS MF633cdw scanner?
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20180122/1c3b68e9/attachment.html>