[sane-devel] Epson Perfection V37/v200 support SANE.

[Robert A. Schmied]

aloha camil

i note your prior message dated 4 aug 18 in which you list function
void dip_apply_color_profile of the iscan package -- is this the part
you are referring to when you write ".. edit the driver source code .."?

regardless, for us casual hackers more specifics as to what to
edit/change would be extremely helpful and greatly appreciated.


ras



Camil Băncioiu wrote:
> Unfortunately, on Linux you will not have 16-bit scanning, only 8-bit, if
> that is important to you. Scanning at 16-bit can be enabled, but you need
> to edit the driver source code and compile it yourself. I have done so.
> 
> On Sun, Sep 2, 2018 at 8:06 PM Yuri Chornoivan <yurchor at ukr.net> wrote:
> 
> 
>>вівторок, 21 серпня 2018 р. 13:23:51 EEST Виктор Рыжков написано:
>>
>>>Hello, sane-developers!
>>>Help me please. I am work in Vologda State Library.
>>>We switched from Windows to ALT Linux, and we had problems with the Epson
>>>Perfestion V37/V200 scanners. There are no official Epson drivers on the
>>>ALT Linux.SANE does not support them. Do you have the opportunity to help
>>>us in this matter?
>>>Yours faithfully, engineer of support Viktor Ryzhkov.
>>
>>Hi,
>>
>>You can use drivers from the hardware manufacturer:
>>
>>http://download.ebz.epson.net/dsc/search/01/search/searchModule
>>
>>Just enter "V37" then download packages for your distribution (ALT is RPM-
>>based, you should choose 32- or 64-bits RPM). Install those RPMs.
>>Interface is
>>very similar to the one for Windows.
>>
>>Works fine here for Epson Perfection V330 Photo (same family) on Mageia 6,
>>64-
>>bits.
>>
>>Hope this helps.
>>
>>Best regards,
>>Yuri
>>
>>
>>
>>
>>--
>>sane-devel mailing list: sane-devel at alioth-lists.debian.net
>>https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel
>>Unsubscribe: Send mail with subject "unsubscribe your_password"
>>             to sane-devel-request at lists.alioth.debian.org
> 
> 
>