[sane-devel] Canon TS8000 series PIXMA

[Rolf Bensch]

Hi Martin,

You're using an ancient version of SANE. Please update SANE and test again.

In the log you should see at least pixma version 0.23.3.

Hope this helps.

Cheers,
Rolf


Am 01.09.19 um 16:45 schrieb Martin Gubser:
> Hi Rolf
> 
> Here the requested logfiles:
> 
>     [sanei_debug] Setting debug level of pixma to 11.
>     [pixma] pixma is compiled with pthread support.
>     [pixma] pixma version 0.17.37
>     [pixma] pixma_collect_devices() found Canon PIXMA TS8000 Series at
>     libusb:001:006
>     [pixma] pixma_find_scanners() found 1 devices
>     [pixma] pixma_collect_devices() found Canon PIXMA TS8000 Series at
>     libusb:001:006
>     [pixma] pixma_open(): Canon PIXMA TS8000 Series
>     [pixma] pixma_connect() failed EBUSY
>     [pixma] pixma_open() failed EBUSY
>     [pixma] pixma_close(): Canon PIXMA TS8000 Series
> 
>     [sanei_debug] Setting debug level of pixma to 11.
>     [pixma] pixma is compiled with pthread support.
>     [pixma] pixma version 0.17.37
>     [pixma] pixma_collect_devices() found Canon PIXMA TS8000 Series at
>     libusb:001:007
>     [pixma] pixma_find_scanners() found 1 devices
>     [pixma] pixma_collect_devices() found Canon PIXMA TS8000 Series at
>     libusb:001:007
>     [pixma] pixma_open(): Canon PIXMA TS8000 Series
>     [pixma] *mp150_open***** This is a generation 4 scanner.  *****
>     [pixma] INTR T=6.979 len=32
>     [pixma]  00000000:00 00 00 01 00 00 00 00  00 00 00 00 00 00 00 00
>     [pixma]  00000010:00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
>     [pixma]
>     [pixma] WARNING:send_time() disabled!
>     [pixma] INTR T=7.235 len=32
>     [pixma]  00000000:00 00 00 01 00 00 00 00  00 00 00 00 00 00 00 00
>     [pixma]  00000010:00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
>     [pixma]
>     [pixma] WARNING:send_time() disabled!
>     [pixma] pixma_close(): Canon PIXMA TS8000 Series
> 
> Many thanks for your help
> Martin
> 
> Am 26.08.19 um 21:38 schrieb Rolf Bensch:
>> Hi Martin,
>>
>> Please create 2 logfiles from a terminal, one with failed start and
>> another with your workaround:
>>
>> $ SANE_DEBUG_PIXMA=11 xsane &> xsane.log
>>
>> Many thanks for your help.
>>
>> Cheers,
>> Rolf
>>
>>
>> Am 29.07.19 um 23:32 schrieb Martin Gubser:
>>> Hi Rolf
>>>
>>> On Linux Mint 19 Cinnamon, Version 3.8.9 my TS8050 does not initialize properly.
>>>
>>> When I start XSANE from within Gimp the error message "device busy" is displayed.
>>>
>>> Starting XSANE from the menu results in the error message "Fehler beim Öffnen des Gerätes "pixma:04A91800_12F863": Ungültiges Argument.
>>>
>>> I have found the following work-around:
>>> - switch off the TS8050
>>> - perform "scanimage -T" in a command window. Result: "no Sane devices found"
>>> - switch on the TS8050
>>> - perform "scanimage -T" again. Sometimes the steps from "switch off the TS8050" to here have to be repeated.
>>> - Start XSANE again from the menu.
>>> - Now I can also start XSANE from within Gimp.
>>>
>>> I have quite a fast computer and a race condition or other timing problem could well be the cause.
>>>
>>> Best regards,
>>> Martin 
>>>
>>>
>>> Am 29.07.19 um 22:37 schrieb Rolf Bensch:
>>>
>>>> Hi Timothy,
>>>>
>>>> Many thanks for your report. I just updated the doc files.
>>>>
>>>> One last question: Have you also tried scanner access via WiFi? I
>>>> suppose it's not working like other PIXMA TS scanners.
>>>>
>>>> Cheers,
>>>> Rolf
>>>>
>>>>
>>>> Am 22.07.19 um 21:32 schrieb Timothy D. Upton:
>>>>> Hi Rolf,
>>>>> I just got a chance to thoroughly test the operation of my Canon TS8220
>>>>> printer/scanner running under SANE.  I tried scanning using all possible
>>>>> resolutions and options, everything appears to work perfectly.
>>>>> Thanks for supporting the Linux community,
>>>>> Tim.
>>>>>
>>>>>
>>>>> On Sun, Jun 2, 2019 at 5:18 AM Rolf Bensch <rolf at bensch-online.de
>>>>> <mailto:rolf at bensch-online.de>> wrote:
>>>>>
>>>>>     Hi,
>>>>>
>>>>>     I would follow the install instructions from INSTALL.linux which comes
>>>>>     with the sources or from here: http://www.sane-project.org/docs.html
>>>>>
>>>>>     @Tim: Is high resolution scan (1200 dpi) and are all other options
>>>>>     working? I would like to update scanners status page here:
>>>>>     http://www.sane-project.org/lists/sane-backends-cvs.html#S-PIXMA
>>>>>
>>>>>     Many thanks for your help.
>>>>>
>>>>>     Cheers,
>>>>>     Rolf
>>>>>
>>>>>
>>>>>     Am 29.05.19 um 04:30 schrieb Timothy D. Upton:
>>>>>     > Hi all,
>>>>>     >
>>>>>     > I have a Canon TS8220 printer/scanner.  It seems to work perfectly
>>>>>     > (with e.g., Simple Scan) using the latest development release of
>>>>>     > SANE.  The stable release did NOT work.
>>>>>     >
>>>>>     > I followed the install instructions described here:
>>>>>     >
>>>>>     https://askubuntu.com/questions/641261/how-can-i-link-my-canon-mg5650-scanner-to-ubuntu
>>>>>     >
>>>>>     > Or simply:
>>>>>     > sudo add-apt-repository ppa:rolfbensch/sane-git
>>>>>     > sudo apt-get update
>>>>>     > sudo apt-get upgrade
>>>>>     >
>>>>>     > Thanks for all your efforts!
>>>>>     > Tim Upton.
>>>>>     >
>>>>>