[sane-devel] Canon TS8000 series PIXMA

[Martin Gubser]

Hi Rolf

Here the requested logfiles:

    [sanei_debug] Setting debug level of pixma to 11.
    [pixma] pixma is compiled with pthread support.
    [pixma] pixma version 0.17.37
    [pixma] pixma_collect_devices() found Canon PIXMA TS8000 Series at
    libusb:001:006
    [pixma] pixma_find_scanners() found 1 devices
    [pixma] pixma_collect_devices() found Canon PIXMA TS8000 Series at
    libusb:001:006
    [pixma] pixma_open(): Canon PIXMA TS8000 Series
    [pixma] pixma_connect() failed EBUSY
    [pixma] pixma_open() failed EBUSY
    [pixma] pixma_close(): Canon PIXMA TS8000 Series

    [sanei_debug] Setting debug level of pixma to 11.
    [pixma] pixma is compiled with pthread support.
    [pixma] pixma version 0.17.37
    [pixma] pixma_collect_devices() found Canon PIXMA TS8000 Series at
    libusb:001:007
    [pixma] pixma_find_scanners() found 1 devices
    [pixma] pixma_collect_devices() found Canon PIXMA TS8000 Series at
    libusb:001:007
    [pixma] pixma_open(): Canon PIXMA TS8000 Series
    [pixma] *mp150_open***** This is a generation 4 scanner.  *****
    [pixma] INTR T=6.979 len=32
    [pixma]  00000000:00 00 00 01 00 00 00 00  00 00 00 00 00 00 00 00
    [pixma]  00000010:00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    [pixma]
    [pixma] WARNING:send_time() disabled!
    [pixma] INTR T=7.235 len=32
    [pixma]  00000000:00 00 00 01 00 00 00 00  00 00 00 00 00 00 00 00
    [pixma]  00000010:00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    [pixma]
    [pixma] WARNING:send_time() disabled!
    [pixma] pixma_close(): Canon PIXMA TS8000 Series

Many thanks for your help
Martin

Am 26.08.19 um 21:38 schrieb Rolf Bensch:
> Hi Martin,
>
> Please create 2 logfiles from a terminal, one with failed start and
> another with your workaround:
>
> $ SANE_DEBUG_PIXMA=11 xsane &> xsane.log
>
> Many thanks for your help.
>
> Cheers,
> Rolf
>
>
> Am 29.07.19 um 23:32 schrieb Martin Gubser:
>> Hi Rolf
>>
>> On Linux Mint 19 Cinnamon, Version 3.8.9 my TS8050 does not initialize properly.
>>
>> When I start XSANE from within Gimp the error message "device busy" is displayed.
>>
>> Starting XSANE from the menu results in the error message "Fehler beim Öffnen des Gerätes "pixma:04A91800_12F863": Ungültiges Argument.
>>
>> I have found the following work-around:
>> - switch off the TS8050
>> - perform "scanimage -T" in a command window. Result: "no Sane devices found"
>> - switch on the TS8050
>> - perform "scanimage -T" again. Sometimes the steps from "switch off the TS8050" to here have to be repeated.
>> - Start XSANE again from the menu.
>> - Now I can also start XSANE from within Gimp.
>>
>> I have quite a fast computer and a race condition or other timing problem could well be the cause.
>>
>> Best regards,
>> Martin 
>>
>>
>> Am 29.07.19 um 22:37 schrieb Rolf Bensch:
>>
>>> Hi Timothy,
>>>
>>> Many thanks for your report. I just updated the doc files.
>>>
>>> One last question: Have you also tried scanner access via WiFi? I
>>> suppose it's not working like other PIXMA TS scanners.
>>>
>>> Cheers,
>>> Rolf
>>>
>>>
>>> Am 22.07.19 um 21:32 schrieb Timothy D. Upton:
>>>> Hi Rolf,
>>>> I just got a chance to thoroughly test the operation of my Canon TS8220
>>>> printer/scanner running under SANE.  I tried scanning using all possible
>>>> resolutions and options, everything appears to work perfectly.
>>>> Thanks for supporting the Linux community,
>>>> Tim.
>>>>
>>>>
>>>> On Sun, Jun 2, 2019 at 5:18 AM Rolf Bensch <rolf at bensch-online.de
>>>> <mailto:rolf at bensch-online.de>> wrote:
>>>>
>>>>     Hi,
>>>>
>>>>     I would follow the install instructions from INSTALL.linux which comes
>>>>     with the sources or from here: http://www.sane-project.org/docs.html
>>>>
>>>>     @Tim: Is high resolution scan (1200 dpi) and are all other options
>>>>     working? I would like to update scanners status page here:
>>>>     http://www.sane-project.org/lists/sane-backends-cvs.html#S-PIXMA
>>>>
>>>>     Many thanks for your help.
>>>>
>>>>     Cheers,
>>>>     Rolf
>>>>
>>>>
>>>>     Am 29.05.19 um 04:30 schrieb Timothy D. Upton:
>>>>     > Hi all,
>>>>     >
>>>>     > I have a Canon TS8220 printer/scanner.  It seems to work perfectly
>>>>     > (with e.g., Simple Scan) using the latest development release of
>>>>     > SANE.  The stable release did NOT work.
>>>>     >
>>>>     > I followed the install instructions described here:
>>>>     >
>>>>     https://askubuntu.com/questions/641261/how-can-i-link-my-canon-mg5650-scanner-to-ubuntu
>>>>     >
>>>>     > Or simply:
>>>>     > sudo add-apt-repository ppa:rolfbensch/sane-git
>>>>     > sudo apt-get update
>>>>     > sudo apt-get upgrade
>>>>     >
>>>>     > Thanks for all your efforts!
>>>>     > Tim Upton.
>>>>     >
>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20190901/83bbda3a/attachment.html>