[sane-devel] Canon TR4529 (PIXMA TR4500 Series)

Jean-Marc Spaggiari jean-marc at spaggiari.org
Fri Feb 21 21:58:29 GMT 2020 

@Alexander Thanks. I was able to install it.  How do I try it?
@Thierry Do I download and build this new branch? Does it includes the
patch that Rolf send before?

Le ven. 21 févr. 2020 à 16:53, Thierry HUCAHRD <thierry at ordissimo.com> a
écrit :

> Le 2020-02-21 22:32, Jean-Marc Spaggiari a écrit :
> > Let me know if you want a SSH access to a machine with scanner
> > access...
> I fixed the geometry bp.
> https://gitlab.com/sane-project/backends/-/tree/escl-load-conf-segfault
> >
> > Le ven. 21 févr. 2020 à 16:23, Thierry HUCAHRD
> > <thierry at ordissimo.com> a écrit :
> >
> >> Le 2020-02-21 21:54, Jean-Marc Spaggiari a écrit :
> >>> Interestingly, I don't see the input option anymore :-/ This will
> >>> drive me crazy ;)
> >>
> >> This is not normal, by default it shouldn't be 0.
> >> I'll correct it, but I have to reproduce it.
> >>
> >> scanimage: rounded value of br-x from 0 to 0
> >> scanimage: rounded value of br-y from 0 to 0
> >>
> >>>
> >>> ./frontend/scanimage -d 'escl:http://192.168.23.130:80'
> >> --all-options
> >>> Output format is not set, using pnm as a default.
> >>> Capability : [image/jpeg]
> >>> Capability : [image/jpeg]
> >>> Capability : [image/jpeg]
> >>> Capability : [image/jpeg]
> >>> scanimage: rounded value of br-x from 0 to 0
> >>> scanimage: rounded value of br-y from 0 to 0
> >>>
> >>> All options specific to device `escl:http://192.168.23.130:80':
> >>> Scan mode:
> >>> --mode Gray|Color [Gray]
> >>> Selects the scan mode (e.g., lineart, monochrome, or
> >> color).
> >>> --resolution 75|100|150|200|300|600dpi [75]
> >>> Sets the resolution of the scanned image.
> >>> --preview[=(yes|no)] [no]
> >>> Request a preview-quality scan.
> >>> --preview-in-gray[=(yes|no)] [no]
> >>> Request that all previews are done in monochrome mode.  On
> >> a
> >>> three-pass scanner this cuts down the number of passes to
> >> one
> >>> and on a
> >>> one-pass scanner, it reduces the memory requirements and
> >>> scan-time of
> >>> the preview.
> >>> Geometry:
> >>> -l 0.0846558..215.9mm [0]
> >>> Top-left x position of scan area.
> >>> -t 0.0846558..297.011mm [0]
> >>> Top-left y position of scan area.
> >>> -x 0.0846558..215.9mm [0]
> >>> Width of scan-area.
> >>> -y 0.0846558..297.011mm [0]
> >>> Height of scan-area.
> >>>
> >>> Le ven. 21 févr. 2020 à 15:43, Jean-Marc Spaggiari
> >>> <jean-marc at spaggiari.org> a écrit :
> >>>
> >>>> So I can delete my sane-escl folder?
> >>>>
> >>>> Here is the output for both default debian installed and locally
> >>>> build:
> >>>> (base) jmspaggi at precision5530:~/backends$ scanimage -d
> >>>> 'escl:http://192.168.23.130:80' -x 215 -y 296 -T
> >>>> Output format is not set, using pnm as a default.
> >>>> scanimage: scanning image of size 637x877 pixels at 24 bits/pixel
> >>>> scanimage: acquiring RGB frame, 8 bits/sample
> >>>> scanimage: reading one scanline, 1911 bytes... PASS
> >>>> scanimage: reading one byte... PASS
> >>>> scanimage: stepped read, 2 bytes... PASS
> >>>> scanimage: stepped read, 4 bytes... PASS
> >>>> scanimage: stepped read, 8 bytes... PASS
> >>>> scanimage: stepped read, 16 bytes... PASS
> >>>> scanimage: stepped read, 32 bytes... PASS
> >>>> scanimage: stepped read, 64 bytes... PASS
> >>>> scanimage: stepped read, 128 bytes... PASS
> >>>> scanimage: stepped read, 256 bytes... PASS
> >>>> scanimage: stepped read, 512 bytes... PASS
> >>>> scanimage: stepped read, 1024 bytes... PASS
> >>>> scanimage: stepped read, 2048 bytes... PASS
> >>>> scanimage: stepped read, 2047 bytes... PASS
> >>>> scanimage: stepped read, 1023 bytes... PASS
> >>>> scanimage: stepped read, 511 bytes... PASS
> >>>> scanimage: stepped read, 255 bytes... PASS
> >>>> scanimage: stepped read, 127 bytes... PASS
> >>>> scanimage: stepped read, 63 bytes... PASS
> >>>> scanimage: stepped read, 31 bytes... PASS
> >>>> scanimage: stepped read, 15 bytes... PASS
> >>>> scanimage: stepped read, 7 bytes... PASS
> >>>> scanimage: stepped read, 3 bytes... PASS
> >>>>
> >>>> (base) jmspaggi at precision5530:~/backends$ ./frontend/scanimage -d
> >>>> 'escl:http://192.168.23.130:80' -x 215 -y 296 -T
> >>>> Output format is not set, using pnm as a default.
> >>>> Capability : [image/jpeg]
> >>>> Capability : [image/jpeg]
> >>>> Capability : [image/jpeg]
> >>>> Capability : [image/jpeg]
> >>>> scanimage: rounded value of br-x from 215 to 215
> >>>> scanimage: rounded value of br-y from 296 to 296
> >>>> scanimage: scanning image of size 634x874 pixels at 24 bits/pixel
> >>>> scanimage: acquiring RGB frame, 8 bits/sample
> >>>> scanimage: reading one scanline, 1902 bytes... PASS
> >>>> scanimage: reading one byte... PASS
> >>>> scanimage: stepped read, 2 bytes... PASS
> >>>> scanimage: stepped read, 4 bytes... PASS
> >>>> scanimage: stepped read, 8 bytes... PASS
> >>>> scanimage: stepped read, 16 bytes... PASS
> >>>> scanimage: stepped read, 32 bytes... PASS
> >>>> scanimage: stepped read, 64 bytes... PASS
> >>>> scanimage: stepped read, 128 bytes... PASS
> >>>> scanimage: stepped read, 256 bytes... PASS
> >>>> scanimage: stepped read, 512 bytes... PASS
> >>>> scanimage: stepped read, 1024 bytes... PASS
> >>>> scanimage: stepped read, 2048 bytes... PASS
> >>>> scanimage: stepped read, 2047 bytes... PASS
> >>>> scanimage: stepped read, 1023 bytes... PASS
> >>>> scanimage: stepped read, 511 bytes... PASS
> >>>> scanimage: stepped read, 255 bytes... PASS
> >>>> scanimage: stepped read, 127 bytes... PASS
> >>>> scanimage: stepped read, 63 bytes... PASS
> >>>> scanimage: stepped read, 31 bytes... PASS
> >>>> scanimage: stepped read, 15 bytes... PASS
> >>>> scanimage: stepped read, 7 bytes... PASS
> >>>> scanimage: stepped read, 3 bytes... PASS
> >>>>
> >>>> Le ven. 21 févr. 2020 à 15:40, Thierry HUCAHRD
> >>>> <thierry at ordissimo.com> a écrit :
> >>>>
> >>>>> Le 2020-02-21 21:28, Jean-Marc Spaggiari a écrit :
> >>>>>> @Till: indeed. I had to install the autoconf-archive. It solved
> >>>>> the
> >>>>>> issue. Thanks for the guidance.
> >>>>>>
> >>>>>> @Thierry:
> >>>>>>
> >>>>>> (base) jmspaggi at precision5530:~/backends$ sudo
> >>>>> ./frontend/scanimage -L
> >>>>>> device `pixma:04A91854_13B71E' is a CANON Canon PIXMA TR4500
> >>>>> Series
> >>>>>> multi-function peripheral
> >>>>>> (base) jmspaggi at precision5530:~/backends$ sudo
> >>>>> ./frontend/scanimage -d
> >>>>>> 'escl:http://192.168.23.130:80'  -T
> >>>>>> Output format is not set, using pnm as a default.
> >>>>>> scanimage: open of device escl:http://192.168.23.130:80 failed:
> >>>>> Device
> >>>>>> busy
> >>>>>>
> >>>>>> So I un-plugged the 2 printers, stopped the 2 and restarted
> >> only
> >>>>> the
> >>>>>> Canon. I can heat the printer moving but I get the same error:
> >>>>>> scanimage: sane_start: Invalid argument
> >>>>>>
> >>>>>> please note that I do that on my "backends" folder, which I got
> >>>>> from
> >>>>>> that: git clone https://gitlab.com/sane-project/backends.gitI
> >>>>> also
> >>>>>> have a sane-escl folder which I got from the link you sent
> >>>>> before but
> >>>>>> there is no "scanimage" there.
> >>>>>>
> >>>>> sane-escl is archived
> >>>>> Please test this :
> >>>>> $ scanimage -d 'escl:http://192.168.23.130:80' -x 215 -y 296 -T
> >>>>>> JMS
> >>>>>>
> >>>>>> Le ven. 21 févr. 2020 à 15:16, Till Kamppeter
> >>>>>> <till.kamppeter at gmail.com> a écrit :
> >>>>>>
> >>>>>>> On 21/02/2020 20:26, Jean-Marc Spaggiari wrote:
> >>>>>>>> So.
> >>>>>>>>
> >>>>>>>> I have cloned the backend repo:
> >>>>>>>> git clone https://gitlab.com/sane-project/backends.git
> >>>>>>>>
> >>>>>>>> Applied the patch (Changed 1200 to 600 and added the last
> >>>>> param).
> >>>>>>>>
> >>>>>>>> And now I'm trying to follow the instructions there:
> >>>>>>>> https://help.ubuntu.com/community/CompileSaneFromSource
> >>>>>>>>
> >>>>>>>> running ./autogen.sh failes right from the beginning :( I
> >>>>> prints
> >>>>>>>> thousands of lines "patch: **** Can't create file
> >>>>> ./ltmain.sh.orig
> >>>>>>> : Too
> >>>>>>>> many open files" I increased my limit to 10k files, but I'm
> >>>>>>> getting the
> >>>>>>>> exact same error. I tried to checkout the 1.0.29 but got the
> >>>>> same
> >>>>>>> error.
> >>>>>>>>
> >>>>>>>> after investigations it seems coming from the lack of
> >>>>> autopoint.
> >>>>>>> apt-get
> >>>>>>>> install solved it.
> >>>>>>>>
> >>>>>>>> I tried to run configure with this command:
> >>>>>>>> ./configure --prefix=/usr --libdir=/usr/lib/
> >> --sysconfdir=/etc
> >>>>>>>> --localstatedir=/var  --enable-avahi
> >>>>>>>>
> >>>>>>>> But it failed:
> >>>>>>>> ./configure: line 14868: syntax error near unexpected token
> >>>>>>> `noext,'
> >>>>>>>> ./configure: line 14868: `AX_CXX_COMPILE_STDCXX_11(noext,
> >>>>>>> optional)'
> >>>>>>>>
> >>>>>>>
> >>>>>>> If you are on Ubuntu, you need to install the
> >>>>> "autoconf-archive"
> >>>>>>> package.
> >>>>>>>
> >>>>>>> Till
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20200221/a406e11b/attachment.html>

More information about the sane-devel mailing list