[sane-devel] Canon XK90 and TS8030 works with sane

[Ralph Little]

Hi,

On 2021-12-06 1:37 a.m., WATANABE Kazuhiro wrote:
> Hi, all.
>
> I have tested my Canon XK90 with the following environment.
>
>   sane-backends-1.0.32_7
>   sane-airscan-0.99.26
>   xsane-0.999_6
>   FreeBSD 12.2-RELEASE
>
> | $ scanimage -V
> | scanimage (sane-backends) 1.0.32; backend version 1.0.32
> | $ scanimage -L
> | device `pixma:04A918B6_103859' is a CANON Canon PIXUS XK90 Series multi-function peripheral
> | device `escl:https://192.168.0.108:443' is a Canon XK90 series platen scanner
> | device `airscan:e0:Canon XK90 series' is a eSCL Canon XK90 series ip=192.168.0.108
> | $
>
> Scanning all supported resolutions (up to 1200dpi) is good with both
> sane-pixma and sane-airscan.  Monochrome scan is also fine.
>
> By the way, sane-escl doesn't work at all.
>
> | $ scanimage -d 'escl:https://192.168.0.108:443' -o test.pnm
> | scanimage: open of device escl:https://192.168.0.108:443 failed: Invalid argument
> | $
>
>
> And I have also tested Canon TS8030 with the same environment.
>
> | $ scanimage -L
> | device `pixma:04A91800_11D8FA' is a CANON Canon PIXMA TS8000 Series multi-function peripheral
> | device `escl:https://192.168.0.109:443' is a Canon TS8000 series platen scanner
> | device `airscan:e0:Canon TS8000 series' is a eSCL Canon TS8000 series ip=192.168.0.109
> $
>
> Scanning all supported resolutions is good with sane-airscan (up to
> 1200dpi), sane-pixma (up to 2400dpi), and sane-escl (up to 1200dpi).
> Monochrome scan is also fine.
Thank you for your report.
I will update the support devices page and create an MR for the patches.

Cheers,
Ralph