[sane-devel] Agfa Snapscan 1212U, with SANE, on El Capitan

[Niels Hutchison]

Thanks for replying, Ralph.
Here's the Terminal outcome:

miMac:~ Niels$ SANE_DEBUG_SNAPSCAN=128 scanimage -L
[sanei_debug] Setting debug level of snapscan to 128.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] add_usb_device(/dev/usb/scanner0 bus=usb)
[snapscan] add_usb_device: Detected (kind of) an USB device
[snapscan] snapscani_usb_open(/dev/usb/scanner0)
[snapscan] add_usb_device: error opening device /dev/usb/scanner0:
Invalid argument
[snapscan] add_usb_device(libusb:003:005-06bd-2061-ff-ff)
[snapscan] add_usb_device: Detected (kind of) an USB device
[snapscan] snapscani_usb_open(libusb:003:005-06bd-2061-ff-ff)
[snapscan] add_usb_device: Checking if 0x06bd is a supported USB vendor ID
[snapscan] snapscani_check_device()
[snapscan] mini_inquiry
[snapscan] snapscan_cmd
[snapscan] snapscani_usb_cmd(1,0x7fff58e99932,6,0x7fff58e99960,0x7fff58e99938
(36))
[snapscan] atomic_usb_cmd(1,0x7fff58e99932,6,0x7fff58e99960,0x7fff58e99938 (36))
[snapscan] usb_cmd(1,0x7fff58e99932,6,0x7fff58e99960,0x7fff58e99938 (36))
[snapscan] usb_cmd: cmdlen=6, datalen=0
[snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x24 0x00
[snapscan] Written 6 bytes
[snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] Read 8 bytes
[snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00
0x41 0x47 ...
[snapscan] Read 36 bytes
[snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] Read 8 bytes
[snapscan] snapscani_check_device: Is vendor "AGFA" model "SNAPSCAN" a
supported scanner?
[snapscan] snapscani_get_model_id(SNAPSCAN, 1, 2)
[snapscan] snapscani_get_model_id: looking up scanner for ID 0x06bd,0x2061.
[snapscan] snapscani_check_device: Autodetected driver: SnapScan
[snapscan] snapscani_usb_close(1)
[snapscan] 1st read 3 write 1
[snapscan] snapscani_init_device_structure()
[snapscan] sane_snapscan_get_devices (0x7fff58e9a000, 0)
device `snapscan:libusb:003:005-06bd-2061-ff-ff' is a AGFA SNAPSCAN
flatbed scanner
[snapscan] sane_snapscan_exit

It looks to me like the HD spots the scanner OK.
Preview>File>Import from scanner is still greyed out; Image Capture
reports no scanner detected.

Same-old same-old, I'm afraid,
Niels

P.S. I'm sending this again, hoping it appears on the relevant thread
of sane-devel. (My previous reply seems to have reached Ralph Little
only - perhaps I should have pressed "Reply All".)