[sane-devel] User question: Canon CanoScan 3200F

Dario Klenke dario.klenke at mailbox.org
Sat Jan 1 13:03:03 GMT 2022


Hi,

thank you for the quick response.
I downloaded the files you suggested and tried to follow the instructions in the cs3200f.txt file within. This instructed me to run configure after placing the relevant files in the backends folder which worked fine. Then I tried to make but ran into an issue again.
The file states:
"Now, in dir $SOMEDIR/sane-backends/backend you must add
to the Makefile the following lines
(e.g. before the line starting libsane-dc25.la: ...)
libsane-cs3200f.la: ../sanei/sanei_constrain_value.lo
... (shortened for brevity)"
which I did add those lines around line 2630 of the Makefile in question. See my gist here https://gist.github.com/dklenke/b02e6349dcce2b5b6f4b9c9d13d0efc2 again for a how I did that.
Then when running "make >make.log 2>&1" in the backends folder the log showed these errors:
pi at raspberrypi:~/sane-backend/backend $ cat make.log
make all-am
make[1]: Entering directory '/home/pi/sane-backend/backend'
make[1]: *** No rule to make target 'libsane-cs3200f.la', needed by 'all-am'. Stop.
make[1]: Leaving directory '/home/pi/sane-backend/backend'
make: *** [Makefile:4265: all] Error 2

What did I do wrong here?
Again thank you for you help an Best regards,
Dario

> Ralph Little <skelband at gmail.com> hat am 31.12.2021 17:50 geschrieben:
> 
> 
> Hi,
> 
> On 2021-12-31 5:29 a.m., Dario Klenke via sane-devel wrote:
> 
> > Hi,
> > I am trying to setup sane to use a canon CanoScan 3200F and was directed to ask my question here from the IRC channel. I am using a rasberry pi zero running Raspbian GNU/Linux 11 (bullseye) lite. I compiled sane from source. Output of scanimage --version:
> > scanimage (sane-backends) 1.0.32.227-5591; backend version 1.0.32.
> > My scanner is recognized by lsusb and sane-find-scanner -v -v also shows the scanner but complains "Couldn't determine the type of the USB chip". Unfortunately scanimage -L cannot identify any scanners.
> > Following a post on the cent-os forums that had similar issues that were resolved by installing the yum package sane-backends-drivers-scanners for the user in question I tried to look into whether I have the required backend drivers. The sane documentation lists the scanner as unsupported but says in the comments: "Actually this scanner is supported by the experimental cs3200f backend now".
> > I could not find any files in the backends folder of my clone of the source code that contained the string cs3200f and I found an old bug report from the sane-backends ubuntu package that seems to confirm my fears about missing backends. It states: "However, the experimental CVS wasn't transferred over when they [the sane project] moved from CVS to git."
> > Attached to this post was an email exchange from 2013 where someone from the sane dev team supplied a backup of the experimental backend and suggested a patch to /backend/Makefile.am and /configure.in to allow its compilation.
> > Now this is where my attempts to resolve this myself kind of end. The structure of the Makefile in question seems to have changed too substantially since 2013 for someone with barely any C knowledge like me to apply the relevant changes.
> > So, my questions: Am I even on the right track? Am I missing the cs3200f backend with my "naked" sane install from source? If not is there any other way to run the canon CanoScan 3200f with sane?
> > Very happy about any and all feedback.
> > Thank you and Best regards,
> > Dario Klenke
> > 
> > P.S.
> > this is the email exchange i mentioned earlier: https://alioth-lists.debian.net/pipermail/sane-devel/2013-March/031124.html
> > and this is the bug report from the ubuntu forums: https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/738302
> > various info output about my system if needed: https://gist.github.com/dklenke/b02e6349dcce2b5b6f4b9c9d13d0efc2
> > 
> If you download the attachment here: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20130327/d616faed/attachment-0001.bin,
> ...then rename the file to cs3200f.tar.gz you should find that it contains the source you are looking for.
> 
> I will have a look at it later in the day but in the meantime you should be able to check it out.
> 
> Cheers,
> Ralph
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20220101/4a854101/attachment.htm>


More information about the sane-devel mailing list