<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.6.1">
</HEAD>
<BODY>
When configuring a Canon Lide20 scanner through Yast, the scanner is detected as:<BR>
<BR>
"USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan], chip=GL841) at libusb:001:003"<BR>
<BR>
yet when I associate it with the Canoscan Lide20 scanner, the plustek driver is associated, but the 'Associated Scanner' remains blank.<BR>
<BR>
Any ideas?<BR>
<BR>
JC<BR>
<BR>
Tardis:~ # sane-find-scanner<BR>
<BR>
# No SCSI scanners found. If you expected something different, make sure that<BR>
# you have loaded a SCSI driver for your SCSI adapter.<BR>
<BR>
found USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan], chip=GL841)<BR>
# Your USB scanner was (probably) detected. It may or may not be supported by<BR>
# SANE. Try scanimage -L and read the backend's manpage.<BR>
<BR>
# Not checking for parallel port scanners.<BR>
<BR>
# Most Scanners connected to the parallel port or other proprietary ports<BR>
# can't be detected by this program.<BR>
<BR>
Tardis:~ # scanimage -L<BR>
<BR>
No scanners were identified. If you were expecting something different,<BR>
check that the scanner is plugged in, turned on and detected by the<BR>
sane-find-scanner tool (if appropriate). Please read the documentation<BR>
which came with this software (README, FAQ, manpages).<BR>
<BR>
<BR>
</BODY>
</HTML>