<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.16.1">
</HEAD>
<BODY>
Ok, great!<BR>
<BR>
In order to debug the 600 and 1200 dpi, I will need the traces produces by the driver in debug mode. <BR>
<BR>
For that:<BR>
<BR>
- Recompile the driver with debug information:<BR>
$ make distclean<BR>
$ make<BR>
<BR>
- Set the Sane debug variable to full debug mode , and run xsane from the same console, to get the debug infos:<BR>
$ export SANE_DEBUG_PIXMA=10 ; xsane<BR>
<BR>
- Then scan with xsane at 600 dpi, you should get lots traces in the console of what's going on. <BR>
<BR>
- Put all this stuff in a text file, zip it, you can send it directly by email to me (without sending to mailing list), I'll check that.<BR>
Then, I propose to send you some different files that will include additional debug code, in order to better understand what's going on<BR>
<BR>
Rgds,<BR>
Nicolas<BR>
<BR>
<BR>
Le dimanche 10 février 2008 à 23:37 +0900, Gernot Hassenpflug a écrit :
<BLOCKQUOTE TYPE=CITE>
<PRE>
<FONT COLOR="#000000">On Feb 10, 2008 11:24 PM, Gernot Hassenpflug <<A HREF="mailto:aikishugyo@gmail.com">aikishugyo@gmail.com</A>> wrote:</FONT>
<FONT COLOR="#000000">></FONT>
<FONT COLOR="#000000">> Now I will try to integrate the driver into xsane, and also see how it</FONT>
<FONT COLOR="#000000">> does with scanning larger areas up to A4.</FONT>
<FONT COLOR="#000000">Good news, using xsane I could scan an L-size photo and an A4 page in</FONT>
<FONT COLOR="#000000">full colour at 300dpi. anything above that works for a short while</FONT>
<FONT COLOR="#000000">before being cancelled by the hardware. Is is acceptable to post/email</FONT>
<FONT COLOR="#000000">the output file for small scan areas in the hope that this is a simple</FONT>
<FONT COLOR="#000000">timing/buffer problem or something?</FONT>
<FONT COLOR="#000000">Regards, Gernot</FONT>
</PRE>
</BLOCKQUOTE>
</BODY>
</HTML>