Great, thanks for the quick reply!<br><br>Here is the output of the scanimage -T<br><br>$ export SANE_DEBUG_PIXMA=10<br>$ scanimage -T<br>[sanei_debug] Setting debug level of pixma to 10.<br>[pixma] pixma version 0.15.0<br>
[pixma] pixma_collect_devices() found Canon imageCLASS MF4690 at libusb:005:004<br>[pixma] sanei_bjnp_find_devices:<br>[pixma] eth0 is IPv4 capable, sending broadcast..<br>[pixma] pixma_find_scanners() found 1 devices<br>
[pixma] pixma_collect_devices() found Canon imageCLASS MF4690 at libusb:005:004<br>[pixma] sanei_bjnp_find_devices:<br>[pixma] eth0 is IPv4 capable, sending broadcast..<br>[pixma] pixma_open(): Canon imageCLASS MF4690<br>
[pixma] Trying to clear the interrupt buffer...<br>[pixma] no packets in buffer<br>[pixma] Reader task id=12781 (forked)<br>scanimage: scanning image of size 640x877 pixels at 24 bits/pixel<br>scanimage: acquiring RGB frame, 8 bits/sample<br>
scanimage: reading one scanline, 1920 bytes... [pixma] Reader task started<br>[pixma] <br>[pixma] pixma_scan(): start<br>[pixma] line_size=1920 image_size=1683840 channels=3 depth=8<br>[pixma] dpi=75x75 offset=(0,0) dimension=640x877<br>
[pixma] gamma_table=0x8ade184 source=0<br>[pixma] raw_width = 640<br>[pixma] OUT T=3.565 len=10<br>[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 <br>[pixma] <br>[pixma] IN T=3.567 len=14<br>[pixma] 00000000:06 06 03 00 00 41 03 00 41 10 00 00 00 68 <br>
[pixma] <br>[pixma] Current status: paper=0 cal=0 lamp=16<br>[pixma] Current status: paper=0 cal=0 lamp=16<br>[pixma] OUT T=3.568 len=20<br>[pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 <br>[pixma] 00000010:00 00 00 ff <br>
[pixma] <br>[pixma] IN T=3.575 len=2<br>[pixma] 00000000:06 06 <br>[pixma] <br>[pixma] OUT T=3.575 len=20<br>[pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 04 00 00 <br>[pixma] 00000010:00 00 00 fb <br>[pixma] <br>
[pixma] IN T=3.582 len=2<br>[pixma] 00000000:06 06 <br>[pixma] <br>[pixma] OUT T=3.598 len=10<br>[pixma] 00000000:db 20 00 00 00 00 00 00 00 00 <br>[pixma] <br>[pixma] IN T=3.633 len=2<br>[pixma] 00000000:06 06 <br>
[pixma] <br>[pixma] OUT T=3.633 len=21<br>[pixma] 00000000:dd 20 00 00 00 00 00 00 0b 00 01 00 00 00 00 00 <br>[pixma] 00000010:00 00 00 00 ff <br>[pixma] <br>[pixma] BUG:Unmapped SANE Status code 5<br>[pixma] IN T=3.636 len=-9<br>
[pixma] ERROR: ETIMEDOUT<br>[pixma] <br>[pixma] No response yet. Timed out in 8 sec.<br>[pixma] IN T=4.640 len=-9<br>[pixma] ERROR: ETIMEDOUT<br>[pixma] <br>[pixma] No response yet. Timed out in 7 sec.<br>[pixma] IN T=5.645 len=-9<br>
[pixma] ERROR: ETIMEDOUT<br>[pixma] <br>[pixma] No response yet. Timed out in 6 sec.<br>[pixma] IN T=6.646 len=-9<br>[pixma] ERROR: ETIMEDOUT<br>[pixma] <br>[pixma] No response yet. Timed out in 5 sec.<br>[pixma] IN T=7.648 len=-9<br>
[pixma] ERROR: ETIMEDOUT<br>[pixma] <br>[pixma] No response yet. Timed out in 4 sec.<br>[pixma] IN T=8.652 len=-9<br>[pixma] ERROR: ETIMEDOUT<br>[pixma] <br>[pixma] No response yet. Timed out in 3 sec.<br>[pixma] IN T=9.653 len=-9<br>
[pixma] ERROR: ETIMEDOUT<br>[pixma] <br>[pixma] No response yet. Timed out in 2 sec.<br>[pixma] IN T=10.657 len=-9<br>[pixma] ERROR: ETIMEDOUT<br>[pixma] <br>[pixma] No response yet. Timed out in 1 sec.<br>[pixma] WARNING:Error in response phase. cmd:404a<br>
[pixma] If the scanner hangs, reset it and/or unplug the USB cable.<br>[pixma] OUT T=10.657 len=10<br>[pixma] 00000000:ef 20 00 00 00 00 00 00 00 00 <br>[pixma] <br>[pixma] IN T=10.663 len=2<br>[pixma] 00000000:06 06 <br>
[pixma] <br>[pixma] OUT T=10.663 len=10<br>[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 <br>[pixma] <br>[pixma] IN T=10.667 len=14<br>[pixma] 00000000:06 06 03 01 00 41 03 00 41 10 00 01 00 66 <br>[pixma] <br>[pixma] Current status: paper=1 cal=0 lamp=16<br>
[pixma] Current status: paper=1 cal=0 lamp=16<br>[pixma] OUT T=10.668 len=10<br>[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 <br>[pixma] <br>[pixma] IN T=10.670 len=14<br>[pixma] 00000000:06 06 03 01 00 41 03 00 41 10 00 01 00 66 <br>
[pixma] <br>[pixma] Current status: paper=1 cal=0 lamp=16<br>[pixma] Current status: paper=1 cal=0 lamp=16<br>[pixma] OUT T=10.670 len=20<br>[pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 <br>[pixma] 00000010:00 00 00 ff <br>
[pixma] <br>[pixma] IN T=10.674 len=2<br>[pixma] 00000000:06 06 <br>[pixma] <br>[pixma] OUT T=10.674 len=10<br>[pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 <br>[pixma] <br>[pixma] IN T=10.677 len=14<br>[pixma] 00000000:06 06 03 01 00 41 03 00 41 10 00 01 00 66 <br>
[pixma] <br>[pixma] Current status: paper=1 cal=0 lamp=16<br>[pixma] Current status: paper=1 cal=0 lamp=16<br>[pixma] pixma_scan() failed ETIMEDOUT<br>[pixma] Reader task terminated: ETIMEDOUT<br>[pixma] read_image():reader task closed the pipe:0 bytes received, 1683840 bytes expected<br>
FAIL Error: Error during device I/O<br>[pixma] pixma_close(): Canon imageCLASS MF4690<br>$ <br><br><div class="gmail_quote">2009/1/17 Nicolas Martin <span dir="ltr"><<a href="mailto:nicolas.martin@freesurf.fr">nicolas.martin@freesurf.fr</a>></span><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">This Multifunction scanner should be candidate to be handled by the<br>
pixma backend, where it is declared.<br>
<br>
In order to check what's going on, could you run scanimage as follows:<br>
<br>
$ export SANE_DEBUG_PIXMA=10<br>
$ scanimage -T<br>
<br>
and send back the content of the console.<br>
<br>
Nicolas<br>
<br>
</blockquote></div><br>