<html>
<head>
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Verdana
}
</style>
</head>
<body class='hmmessage'>
Hi again,<br><br>The 2400 dpi scan completes ok, but the result is the original image duplicated and stretched.<br>You basically have 2 images side by side.<br>So the vertical resolution is ok, but the horizontal isn't as there are 2 copies of the original image.<br>I will try to send out the logs of a test image, but I first need to get connected using USB again. <br>Requires a but of time, but will try to do tomorrow.<br><br>Thanks,<br><br>Phil<br><br>> Subject: RE: [sane-devel] Pixma MP600R times out after scan stats<br>> From: nicolas.martin@freesurf.fr<br>> To: pwdng@hotmail.com<br>> CC: sane-devel@lists.alioth.debian.org<br>> Date: Sat, 2 May 2009 14:06:10 +0200<br>> <br>> And BTW, you say that 2400 dpi does not work. <br>> <br>> What do you get exactly ? <br>> Does the scanner scan something ? <br>> Is the image wrong ?<br>> Can you send a sample scan at 2400 dpi:<br>> - the log trace using the same command I gave in my previous mail, scan<br>> only a **small** image to keep the log small<br>> - the image (if any) you get <br>> <br>> Let's see then if we can do something to fix this.<br>> <br>> Nicolas<br>> <br>> Le jeudi 30 avril 2009 à 23:46 +0200, Phil Wooding a écrit :<br>> > Hi Nicolas,<br>> > <br>> > Thank you for your reply. Its most appreciated.<br>> > Yes, I can successfully scan with a USB cable.<br>> > As mentioned in the compatibility list, all resolutions work except<br>> > 2400 dpi.<br>> > However, over the network, it always times out...<br>> > Including command scanimage -T which outputs:<br>> > <br>> > scanimage: scanning image of size 640x877 pixels at 24 bits/pixel<br>> > scanimage: acquiring RGB frame, 8 bits/sample<br>> > scanimage: reading one scanline, 1920 bytes... [pixma]<br>> > bjnp_recv_header: (recv) could not read response header, received 0<br>> > bytes!<br>> > [pixma] bjnp_recv_header: (recv) error: Success!<br>> > [pixma] Could not read response to command!<br>> > [pixma] bjnp_recv_header: (recv) could not read response header,<br>> > received 0 bytes!<br>> > [pixma] bjnp_recv_header: (recv) error: Success!<br>> > [pixma] Could not read response to command!<br>> > FAIL Error: Error during device I/O<br>> > <br>> > Do you have any ideas of something I can try?<br>> > <br>> > PS : I won't be able to reply immediately.<br>> > <br>> > Thanks,<br>> > <br>> > Phil<br>> > <br>> > > Subject: Re: [sane-devel] Pixma MP600R times out after scan stats<br>> > > Date: Sat, 25 Apr 2009 10:46:39 +0200<br>> > > <br>> > > In order to facilitate investigations on this: do you successfully<br>> > scan<br>> > > with an usb cable ?<br>> > > <br>> > > Nicolas<br>> > > <br>> > > Le vendredi 24 avril 2009 à 23:30 +0200, Phil Wooding a écrit :<br>> > > > Hi,<br>> > > > <br>> > > > I am trying to get the latest svn code working with a MP600R.<br>> > > > The scanner is properly detected, it starts scanning, but then<br>> > > > nothing...<br>> > > > Any help would be apreciated as it should work according to the<br>> > > > documentation.<br>> > > > <br>> > > > Thanks,<br>> > > > <br>> > > > Phil<br>> > > > <br>> > > > Here are the logs with maximum debug information:<br>> > > > <br>> > > > [pixma] bjnp_set_timeout(requested 10000, set 20000):<br>> > > > [pixma] bjnp_read_bulk(0, bufferptr, 0x8 = -1075284088)<br>> > > > [pixma] bjnp_read_bulk: 0x0 = 0 bytes available at start, Short<br>> > block<br>> > > > = 0 blocksize = 0x400 = 1024<br>> > > > [pixma] So far received 0x0 bytes = 0, need 0x8 = 8<br>> > > > [pixma] No (more) scanner data available, requesting more<br>> > > > [pixma] bjnp_send_read_req sending command<br>> > > > [pixma] 00000000:42 4a 4e 50 02 20 00 00 00 0b 00 09 00 00 00 00 <br>> > > > [pixma] bjnp_recv_header: receiving response header<br>> > > > [pixma] TCP response header(scanner data = 8 bytes):<br>> > > > [pixma] 00000000:42 4a 4e 50 82 20 00 00 00 0b 00 09 00 00 00 08 <br>> > > > [pixma] Scanner reports 0x8 = 8 bytes available<br>> > > > [pixma] reading 0x8 = 8 (of max 0x8 = 8) bytes more<br>> > > > [pixma] bjnp_recv_data: receiving response data<br>> > > > [pixma] bjnp_recv_data: read response payload (8 bytes max)<br>> > > > [pixma] Received TCP response payload (8 bytes):<br>> > > > [pixma] 00000000:06 06 00 00 00 00 00 00 <br>> > > > [pixma] IN T=6.235 len=8<br>> > > > [pixma] 00000000:06 06 00 00 00 00 00 00 <br>> > > > [pixma]<br>> > > > [pixma] bjnp_set_timeout(requested 10000, set 20000):<br>> > > > [pixma] bjnp_write_bulk(0, bufferptr, 0x40 = 64)<br>> > > > [pixma] bjnp_write: sending 0x40 = 64 bytes<br>> > > > [pixma] 00000000:42 4a 4e 50 02 21 00 00 00 0c 00 09 00 00 00 40 <br>> > > > [pixma] 00000010:de 20 00 00 00 00 00 00 00 00 00 00 00 00 00 30 <br>> > > > [pixma] 00000020:00 00 00 00 80 4b 80 4b 00 00 00 00 00 00 00 00 <br>> > > > [pixma] 00000030:00 00 02 80 00 00 03 6d 08 18 00 00 00 00 00 00 <br>> > > > [pixma] 00000040:ff 00 00 81 00 00 02 01 00 00 00 00 00 00 00 d5 <br>> > > > [pixma] bjnp_recv_header: receiving response header<br>> > > > [pixma] TCP response header(scanner data = 4 bytes):<br>> > > > [pixma] 00000000:42 4a 4e 50 82 21 00 00 00 0c 00 09 00 00 00 04 <br>> > > > [pixma] bjnp_recv_data: receiving response data<br>> > > > [pixma] bjnp_recv_data: read response payload (4 bytes max)<br>> > > > [pixma] Received TCP response payload (4 bytes):<br>> > > > [pixma] 00000000:00 00 00 40 <br>> > > > [pixma] OUT T=6.240 len=64<br>> > > > [pixma] 00000000:de 20 00 00 00 00 00 00 00 00 00 00 00 00 00 30 <br>> > > > [pixma] 00000010:00 00 00 00 80 4b 80 4b 00 00 00 00 00 00 00 00 <br>> > > > [pixma] 00000020:00 00 02 80 00 00 03 6d 08 18 00 00 00 00 00 00 <br>> > > > [pixma] 00000030:ff 00 00 81 00 00 02 01 00 00 00 00 00 00 00 d5 <br>> > > > [pixma] <br>> > > > [pixma] bjnp_set_timeout(requested 10000, set 20000):<br>> > > > [pixma] bjnp_read_bulk(0, bufferptr, 0x8 = -1075284088)<br>> > > > [pixma] bjnp_read_bulk: 0x0 = 0 bytes available at start, Short<br>> > block<br>> > > > = 0 blocksize = 0x400 = 1024<br>> > > > [pixma] So far received 0x0 bytes = 0, need 0x8 = 8<br>> > > > [pixma] No (more) scanner data available, requesting more<br>> > > > [pixma] bjnp_send_read_req sending command<br>> > > > [pixma] 00000000:42 4a 4e 50 02 20 00 00 00 0d 00 09 00 00 00 00 <br>> > > > [pixma] bjnp_recv_header: receiving response header<br>> > > > [pixma] bjnp_recv_header: could not read response header (select<br>> > timed<br>> > > > out): Success!<br>> > > > [pixma] IN T=26.257 len=-9<br>> > > > [pixma] ERROR: ETIMEDOUT<br>> > > > <br>> > > > <br>> > > ><br>> > ______________________________________________________________________<br>> > > > What can you do with the new Windows Live? Find out<br>> > > > --<br>> > > > sane-devel mailing list: sane-devel@lists.alioth.debian.org<br>> > > > http://lists.alioth.debian.org/mailman/listinfo/sane-devel<br>> > > > Unsubscribe: Send mail with subject "unsubscribe your_password"<br>> > > > to sane-devel-request@lists.alioth.debian.org<br>> > > <br>> > > <br>> > <br>> > <br>> > ______________________________________________________________________<br>> > What can you do with the new Windows Live? Find out<br>> <br>> <br><br /><hr />Windows Live™: Keep your life in sync. <a href='http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_012009' target='_new'>Check it out!</a></body>
</html>