<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.30.3">
</HEAD>
<BODY>
Did you go on the server and tell it that certain machines can access it? You go to /etc/sane.d/saned.conf on the server, and enter either the IP addresses or the names of the computers you want to allow access. For example, I have<BR>
<BR>
192.168.1.0/24<BR>
<BR>
which means every computer with an IP address between 192.168.1.1 and 192.168.1.255<BR>
<BR>
<BR>
On Sat, 2011-02-19 at 10:56 +0100, Luigi wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
Thank you. I've followed your suggestion and now my client finds the
scanner regularly with scanimage -L... but still I can't scan, because I
get "access denied". What should I do? Thanks again.
Il 18/02/2011 22:19, <A HREF="mailto:mlb@imparisystems.com">mlb@imparisystems.com</A> ha scritto:
> Sounds like the same problem I had -
>
> On the client machine, you have to tell it where to find the scanner. In
>
> /etc/sane.d/net.conf
>
> make sure you have an entry with either the IP address of the server or
> the server name if you're using DNS
>
> For example, I added the line
>
> 192.168.1.100
>
> Worked like a champ.
>
> On Fri, 18 Feb 2011 15:56:24 +0100, Luigi<<A HREF="mailto:driver.8@libero.it">driver.8@libero.it</A>> wrote:
>> Hi! My OS is Mint 10 on my client/laptop and Ubuntu 10.10 on my
>> server/desktop
>>
>> Sane version is the same on both computer: scanimage (sane-backends)
>> 1.0.21; backend version 1.0.21.
>>
>> On my desktop computer (server) I can scan without problems with my
>> Epson DX4400 (with drivers downloaded from avasys). On my client laptop,
>> I can't scan images. I've followed this procedure:
>> <A HREF="https://help.ubuntu.com/community/ScanningHowTo">https://help.ubuntu.com/community/ScanningHowTo</A> and I've obtained some
>> strange results. When I try to run "scanimage -L" on my client, I get
>> these results (three different ones in few seconds):
>>
>> $ scanimage -L
>> No scanners were identified. If you were expecting something different,
>> check that the scanner is plugged in, turned on and detected by the
>> sane-find-scanner tool (if appropriate). Please read the documentation
>> which came with this software (README, FAQ, manpages).
>>
>> $ scanimage -L
>> Errore di segmentazione (segmentation fault)
>>
>> $ scanimage -L
>> Errore di segmentazione
>>
>> $ scanimage -L
>> device `net:desktop.local:epkowa:interpreter:003:003' is a Epson
>> (unknown model) flatbed scanner
>>
>> ---------------------------
>>
>> With sudo:
>>
>>
>> $ sudo scanimage -L
>> Errore di segmentazione (segmentation fault)
>>
>> $ sudo scanimage -L
>> device `net:desktop.local:epkowa:interpreter:003:003' is a Epson
>> (unknown model) flatbed scanner
>> Errore di segmentazione
>>
>> $ sudo scanimage -L
>> device `net:desktop.local:epkowa:interpreter:003:003' is a Epson
>> (unknown model) flatbed scanner
>>
>> ------------------------------
>>
>> Even if it (sometimes) finds my scanner, I've never been able to scan an
>> image over my network. "Image scan" opens without errors, but when I try
>> to scan, it says that it can't get access to the scanner. Please help
>> me! Thanks!
>>
>> --
>> sane-devel mailing list: <A HREF="mailto:sane-devel@lists.alioth.debian.org">sane-devel@lists.alioth.debian.org</A>
>> <A HREF="http://lists.alioth.debian.org/mailman/listinfo/sane-devel">http://lists.alioth.debian.org/mailman/listinfo/sane-devel</A>
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>> to <A HREF="mailto:sane-devel-request@lists.alioth.debian.org">sane-devel-request@lists.alioth.debian.org</A>
</PRE>
</BLOCKQUOTE>
<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
-- <BR>
Matt Burkhardt<BR>
Impari Systems, Inc.<BR>
<BR>
<A HREF="mailto:mlb@imparisystems.com">mlb@imparisystems.com</A><BR>
<A HREF="http://www.imparisystems.com">http://www.imparisystems.com</A> <BR>
<A HREF="http://www.linkedin.com/in/mlburkhardt">http://www.linkedin.com/in/mlburkhardt</A> <BR>
<A HREF="http://www.twitter.com/matthewboh">http://www.twitter.com/matthewboh</A><BR>
502 Fairview Avenue<BR>
Frederick, MD 21701<BR>
work (301) 682-7901<BR>
cell (301) 802-3235<BR>
<BR>
<BR>
</TD>
</TR>
</TABLE>
</BODY>
</HTML>