Hi Everyone -<div><br></div><div>-Scanner Model is CanoScane 9000F - and is supported via Pixma. <a href="http://www.sane-project.org/man/sane-pixma.5.html">http://www.sane-project.org/man/sane-pixma.5.html</a></div><div>-I'm running Debian Wheezy 64 Bit.</div>
<div>-I've also tried on Ubuntu 12.04 64 Bit.</div><div>-Scanner runs in windows just fine</div><div>-libusb-dev is installed via apt</div><div>I've ran with the distros installed package 1.0.22 (via APT), I've also installed lasest from GIT. ./configure reports usb support but lusb0_usb.h doesn't. I'm not sure if lusb0_usb is my issue?</div>
<div><br></div><div>I've got outputs from the following w/ debug enabled if applicable as root and non-root user</div><div>-sane-find-scanner</div><div>-scanimage -L</div><div><br></div><div>Ultimately, I feel that somehow scanimage -L isnt't checking for USB devices. I'm not sure how to force it via pixma.conf?</div>
<div><br></div><div>Again, thanks so much</div><div><br></div><div>##scanimage (sane-backends) 1.0.24git; backend version 1.0.22##</div><div><br></div><div>##sane-find-scanner##</div><div><div>##Ran as root, Running as root recognized bus address but fails to report the name of the device at bus address###</div>
<div> # sane-find-scanner will now attempt to detect your scanner. If the</div><div> # result is different from what you expected, first make sure your</div><div> # scanner is powered up and properly connected to your computer.</div>
<div><br></div><div> # No SCSI scanners found. If you expected something different, make sure that</div><div> # you have loaded a kernel SCSI driver for your SCSI adapter.</div><div><br></div><div>found USB scanner (vendor=0x04a9 [Canon], product=0x1908 [CanoScan]) at libusb:001:005</div>
<div> # Your USB scanner was (probably) detected. It may or may not be supported by</div><div> # SANE. Try scanimage -L and read the backend's manpage.</div><div><br></div><div> # Not checking for parallel port scanners.</div>
<div><br></div><div> # Most Scanners connected to the parallel port or other proprietary ports</div><div> # can't be detected by this program.</div><div>##Ran as non root user##</div><div> # sane-find-scanner will now attempt to detect your scanner. If the</div>
<div> # result is different from what you expected, first make sure your</div><div> # scanner is powered up and properly connected to your computer.</div><div><br></div><div> # No SCSI scanners found. If you expected something different, make sure that</div>
<div> # you have loaded a kernel SCSI driver for your SCSI adapter.</div><div><br></div><div>found USB scanner (vendor=0x04a9, product=0x1908) at libusb:001:005</div><div> # Your USB scanner was (probably) detected. It may or may not be supported by</div>
<div> # SANE. Try scanimage -L and read the backend's manpage.</div><div><br></div><div> # Not checking for parallel port scanners.</div><div><br></div><div> # Most Scanners connected to the parallel port or other proprietary ports</div>
<div> # can't be detected by this program.</div><div><br></div><div> # You may want to run this program as root to find all devices. Once you</div><div> # found the scanner devices, be sure to adjust access permissions as</div>
<div> # necessary.</div></div><div><br></div><div>##sudo SANE_DEBUG_PIXMA=3 scanimage -L##</div><div><div>[sanei_debug] Setting debug level of pixma to 3.</div><div>[pixma] pixma is compiled with pthread support.</div><div>
[pixma] pixma version 0.16.2</div><div>[pixma] sanei_bjnp_find_devices:</div><div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div><div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div><div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div>
<div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div><div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div><div>[pixma] pixma_find_scanners() found 0 devices</div><div>device `v4l:/dev/video0' is a Noname Integrated Camera virtual device</div>
</div><div><br></div><div>##SANE_DEBUG_PIXMA=3 scanimage -L##</div><div><div>[sanei_debug] Setting debug level of pixma to 3.</div><div>[pixma] pixma is compiled with pthread support.</div><div>[pixma] pixma version 0.16.2</div>
<div>[pixma] sanei_bjnp_find_devices:</div><div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div><div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div><div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div>
<div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div><div>[pixma] wlan0 is IPv4 capable, sending broadcast..</div><div>[pixma] pixma_find_scanners() found 0 devices</div><div>device `v4l:/dev/video0' is a Noname Integrated Camera virtual device</div>
</div><div><br></div><div><br></div><div><div>Max Resnick<br><a href="mailto:Max.Resnick@gmail.com">Max.Resnick@gmail.com</a><br>631-896-8357<br><br>
</div></div>