[Debconf-devel] Bug#492370: debconf: [INTL:de] updated German man page translation
Helge Kreutzmann
debian at helgefjell.de
Fri Jul 25 16:36:18 UTC 2008
Package: debconf
Version: 1.5.23
Severity: wishlist
Tags: patch l10n
Please find the updated German man page translation for debconf
attached.
If you update your template, please use
'msgfmt --statistics <pofile.po>'
to check the po-files for fuzzy or untranslated strings.
If there are such strings, please contact me so I can update the
German translation.
Greetings
Helge
-------------- next part --------------
# Translation of debconf manpages to German
# Copyright (C) Helge Kreutzmann <debian at helgefjell.de>, 2008.
# This file is distributed under the same license as the debconf package.
#
msgid ""
msgstr ""
"Project-Id-Version: debconf\n"
"Report-Msgid-Bugs-To: debconf at packages.debian.org\n"
"POT-Creation-Date: 2008-03-11 14:38+0000\n"
"PO-Revision-Date: 2008-07-25 18:34+0200\n"
"Last-Translator: Helge Kreutzmann <debian at helgefjell.de>\n"
"Language-Team: de <debian-l10n-german at lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-15\n"
"Content-Transfer-Encoding: 8bit\n"
# type: SH
#: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3
#: ../../debconf-apt-progress:3 ../../debconf-escape:3
#: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3
#: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3
#: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3
#: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3
#: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2
#, no-wrap
msgid "NAME"
msgstr "NAME"
# type: textblock
#: ../../debconf:5
msgid "debconf - run a debconf-using program"
msgstr "debconf - f?hre ein Debconf-verwendenes Programm aus"
# type: SH
#: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7
#: ../../debconf-apt-progress:7 ../../debconf-escape:7
#: ../../debconf-communicate:9 ../../debconf-copydb:16
#: ../../debconf-getlang:15 ../../debconf-get-selections:7
#: ../../debconf-loadtemplate:13 ../../debconf-mergetemplate:16
#: ../../debconf-set-selections:19 ../../debconf-show:19
#: ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7 debconf.conf.5:12
#: confmodule.3:4
#, no-wrap
msgid "SYNOPSIS"
msgstr "?BERSICHT"
# type: verbatim
#: ../../debconf:11
#, no-wrap
msgid ""
" debconf [options] command [args]\n"
"\n"
msgstr ""
" debconf [Optionen] Befehl [Argumente]\n"
"\n"
# type: SH
#: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20
#: ../../debconf-apt-progress:15 ../../debconf-escape:12
#: ../../debconf-communicate:13 ../../debconf-copydb:29
#: ../../debconf-getlang:20 ../../debconf-get-selections:11
#: ../../debconf-loadtemplate:17 ../../debconf-mergetemplate:20
#: ../../debconf-set-selections:24 ../../debconf-show:25
#: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4
#: confmodule.3:12 debconf.7:4 debconf-devel.7:4
#, no-wrap
msgid "DESCRIPTION"
msgstr "BESCHREIBUNG"
# type: textblock
#: ../../debconf:15
msgid ""
"Debconf is a configuration system for Debian packages. For a debconf "
"overview and documentation for sysadmins, see L<debconf(7)> (in the debconf-"
"doc package)."
msgstr ""
"Debconf ist ein Konfigurationssystem f?r Debianpakete. Lesen Sie L<debconf(7)"
"> (im Paket debconf-doc) f?r einen ?berblick und die Dokumentation von "
"Debconf f?r Systemadministratoren."
# type: textblock
#: ../../debconf:19
msgid ""
"The B<debconf> program runs a program under debconf's control, setting it up "
"to talk with debconf on stdio. The program's output is expected to be "
"debconf protocol commands, and it is expected to read result codes on stdin. "
"See L<debconf-devel(7)> for details about the debconf protocol."
msgstr ""
"Das Programm B<debconf> f?hrt ein Programm unter der Steuerung von Debconf "
"aus und richtet es so ein, dass es via Stdio mit Debconf kommuniziert. Als "
"Ausgabe des Programms werden Debconf-Protokoll-Befehle erwartet und es wird "
"erwartet, dass es Codes via Stdin liest. Lesen Sie L<debconf-devel(7)> f?r "
"Details ?ber das Debconf-Protokoll."
# type: textblock
#: ../../debconf:24
msgid ""
"The command to be run under debconf must be specified in a way that will let "
"your PATH find it."
msgstr ""
"Der Befehl, der von Debconf ausgef?hrt werden soll, muss so angegeben "
"werden, dass er in Ihrem PATH gefunden werden kann."
# type: textblock
#: ../../debconf:27
msgid ""
"This command is not the usual way that debconf is used. It's more typical "
"for debconf to be used via L<dpkg-preconfigure(8)> or L<dpkg-reconfigure(8)>."
msgstr ""
"Dieser Befehl ist nicht die normale Art, Debconf zu verwenden. F?r Debconf "
"ist die Verwendung via L<dpkg-preconfigure(8)> oder L<dpkg-reconfigure(8)> "
"typischer."
# type: =head1
#: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:35
#: ../../debconf-mergetemplate:44 ../../debconf-set-selections:68
#: ../../debconf-show:36 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:18
msgid "OPTIONS"
msgstr "OPTIONEN"
# type: =item
#: ../../debconf:34
msgid "B<-o>I<package>, B<--owner=>I<package>"
msgstr "B<-o>I<Paket>, B<--owner=>I<Paket>"
# type: textblock
#: ../../debconf:36
msgid ""
"Tell debconf what package the command it is running is a part of. This is "
"necessary to get ownership of registered questions right, and to support "
"unregister and purge commands properly."
msgstr ""
"Teilt Debconf mit, zu welchem Paket der von Debconf ausgef?hrte Befehl "
"geh?rt. Dies ist notwendig, um den Eigent?mer von registrierten Fragen "
"korrekt zu bestimmen und um die Befehle ?unregister? und ?purge? vern?nftig zu "
"unterst?tzen."
# type: =item
#: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:22
msgid "B<-f>I<type>, B<--frontend=>I<type>"
msgstr "B<-f>I<Typ>, B<--frontend=>I<Typ>"
# type: textblock
#: ../../debconf:42 ../../dpkg-preconfigure:26
msgid "Select the frontend to use."
msgstr "W?hlt die zu verwendende Oberfl?che aus."
# type: =item
#: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:33
msgid "B<-p>I<value>, B<--priority=>I<value>"
msgstr "B<-p>I<Wert>, B<--priority=>I<Wert>"
# type: textblock
#: ../../debconf:46
msgid "Specify the minimum priority of question that will be displayed."
msgstr "Spezifiziert die minmale Priorit?t der Fragen, die angezeigt werden."
# type: =head1
#: ../../debconf:50 ../../debconf-apt-progress:105 ../../debconf-copydb:74
#: ../../debconf-set-selections:59
msgid "EXAMPLES"
msgstr "BEISPIELE"
# type: textblock
#: ../../debconf:52
msgid "To debug a shell script that uses debconf, you might use:"
msgstr ""
"Um Fehler in einem Shell-Skript, dass Debconf verwendet, zu finden, k?nnten "
"Sie Folgendes verwenden:"
# type: verbatim
#: ../../debconf:54
#, no-wrap
msgid ""
" DEBCONF_DEBUG=developer debconf my-shell-prog\n"
"\n"
msgstr ""
" DEBCONF_DEBUG=developer debconf mein-Shell-Programm\n"
"\n"
# type: textblock
#: ../../debconf:56
msgid "Or, you might use this:"
msgstr "Sie k?nnten auch das Folgende verwenden:"
# type: verbatim
#: ../../debconf:58
#, no-wrap
msgid ""
" debconf --frontend=readline sh -x my-shell-prog\n"
"\n"
msgstr ""
" debconf --frontend=readline sh -x mein-Shell-Programm\n"
"\n"
# type: SH
#: ../../debconf:60 ../../Debconf/Client/ConfModule.pm:153
#: ../../debconf-escape:21 ../../debconf-communicate:39
#: ../../debconf-copydb:101 ../../debconf-getlang:73
#: ../../debconf-loadtemplate:30 ../../debconf-mergetemplate:60
#: ../../debconf-set-selections:82 ../../dpkg-preconfigure:55
#: ../../dpkg-reconfigure:75 debconf.conf.5:537 confmodule.3:36 debconf.7:373
#: debconf-devel.7:944
#, no-wrap
msgid "SEE ALSO"
msgstr "SIEHE AUCH"
# type: textblock
#: ../../debconf:62
msgid "L<debconf-devel(7)>, L<debconf(7)>"
msgstr "L<debconf-devel(7)>, L<debconf(7)>"
# type: SH
#: ../../debconf:112 ../../Debconf/Client/ConfModule.pm:158
#: ../../debconf-communicate:73 ../../debconf-copydb:175
#: ../../debconf-getlang:255 ../../debconf-get-selections:74
#: ../../debconf-loadtemplate:47 ../../debconf-mergetemplate:180
#: ../../debconf-set-selections:228 ../../debconf-show:154
#: ../../dpkg-preconfigure:235 ../../dpkg-reconfigure:260 debconf.conf.5:539
#: confmodule.3:42 debconf.7:379 debconf-devel.7:954
#, no-wrap
msgid "AUTHOR"
msgstr "AUTOR"
# type: textblock
#: ../../debconf:114 ../../Debconf/Client/ConfModule.pm:160
#: ../../debconf-apt-progress:636 ../../debconf-communicate:75
#: ../../debconf-copydb:177 ../../debconf-getlang:257
#: ../../debconf-loadtemplate:49 ../../debconf-mergetemplate:182
#: ../../dpkg-preconfigure:237 ../../dpkg-reconfigure:262
msgid "Joey Hess <joeyh at debian.org>"
msgstr "Joey Hess <joeyh at debian.org>"
# type: textblock
#: ../../Debconf/Client/ConfModule.pm:5
msgid "Debconf::Client::ConfModule - client module for ConfModules"
msgstr "Debconf::Client::ConfModule - Client-Modul f?r ConfModules"
# type: verbatim
#: ../../Debconf/Client/ConfModule.pm:9
#, no-wrap
msgid ""
" use Debconf::Client::ConfModule ':all';\n"
" version('2.0');\n"
" my $capb=capb('backup');\n"
" input(\"medium\", \"foo/bar\");\n"
" my @ret=go();\n"
" if ($ret[0] == 30) {\n"
" \t# Back button pressed.\n"
" \t...\n"
" }\n"
" ...\n"
"\n"
msgstr ""
" use Debconf::Client::ConfModule ':all';\n"
" version('2.0');\n"
" my $capb=capb('backup');\n"
" input(\"medium\", \"foo/bar\");\n"
" my @ret=go();\n"
" if ($ret[0] == 30) {\n"
" \t# Zur?ck-Knopf gedr?ckt.\n"
" \t...\n"
" }\n"
" ...\n"
"\n"
# type: textblock
#: ../../Debconf/Client/ConfModule.pm:22
msgid ""
"This is a module to ease writing ConfModules for Debian's configuration "
"management system. It can communicate with a FrontEnd via the debconf "
"protocol (which is documented in full in the debconf_specification in Debian "
"policy)."
msgstr ""
"Dies ist ein Modul, um das Schreiben von ConfModules f?r Debians "
"Konfigurationsverwaltungsystem zu erleichtern. Es kann mit einer Oberfl?che "
"?ber das Debconf-Protokoll (das komplett in der Debconf-Spezifikation in den "
"Debian-Richtlinien beschrieben ist) kommunizieren."
# type: textblock
#: ../../Debconf/Client/ConfModule.pm:27
msgid ""
"The design is that each command in the protocol is represented by one "
"function in this module (with the name lower-cased). Call the function and "
"pass in any parameters you want to follow the command. If the function is "
"called in scalar context, it will return any textual return code. If it is "
"called in list context, an array consiting of the numeric return code and "
"the textual return code will be returned."
msgstr ""
"Vom Design her ist jeder Befehl im Protokoll durch eine Funktion in diesem "
"Modul repr?sentiert (wobei der Name in Kleinbuchstaben umgewandelt ist). "
"Rufen Sie die Funktion auf und ?bergeben Sie die gew?nschten Parameter, die "
"dem Befehl folgen sollen. Falls die Funktion im skalaren Kontext aufgerufen "
"wird, gibt sie einen R?ckgabecode in Textform zur?ck. Falls Sie im Listen-"
"Kontext aufgerufen wird, wird ein Feld bestehend aus dem numerischen "
"R?ckgabecode und dem R?ckgabecode in Textform zur?ckgegeben."
# type: textblock
#: ../../Debconf/Client/ConfModule.pm:34
msgid ""
"This module uses Exporter to export all functions it defines. To import "
"everything, simply import \":all\"."
msgstr ""
"Dieses Modul verwendet Exporter, um alle von ihr definierten Funktionen zu "
"exportieren. Um alles zu importieren, importieren Sie einfach ?:all?."
# type: =item
#: ../../Debconf/Client/ConfModule.pm:61
msgid "import"
msgstr "import"
# type: textblock
#: ../../Debconf/Client/ConfModule.pm:63
msgid ""
"Ensure that a FrontEnd is running. It's a little hackish. If "
"DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, "
"one is started up automatically and stdin and out are connected to it. Note "
"that this function is always run when the module is loaded in the usual way."
msgstr ""
"Stellt sicher, dass die Oberfl?che l?uft. Es ist ein kleiner Hack. Falls "
"DEBIAN_HAS_FRONTEND gesetzt ist, wird angenommen, dass die Oberfl?che l?uft. "
"Falls nicht, wird eine automatisch gestartet und Standardeingabe und -"
"ausgabe werden damit verbunden. Beachten Sie, dass diese Funktion immer "
"ausgef?hrt wird, wenn das Modul auf dem normalen Weg geladen wird."
# type: =item
#: ../../Debconf/Client/ConfModule.pm:94
msgid "stop"
msgstr "stop"
# type: textblock
#: ../../Debconf/Client/ConfModule.pm:96
msgid ""
"The frontend doesn't send a return code here, so we cannot try to read it or "
"we'll block."
msgstr ""
"Die Oberfl?che sendet hier keinen R?ckgabecode, daher k?nnen wir nicht "
"versuchen, ihn zu lesen oder wir blockieren."
# type: =item
#: ../../Debconf/Client/ConfModule.pm:106
msgid "AUTOLOAD"
msgstr "AUTOLOAD"
# type: textblock
#: ../../Debconf/Client/ConfModule.pm:108
msgid "Creates handler functions for commands on the fly."
msgstr "Erstellt Steuer-Funktionen f?r Befehle in situ."
# type: textblock
#: ../../Debconf/Client/ConfModule.pm:155
msgid ""
"The debconf specification (/usr/share/doc/debian-policy/"
"debconf_specification.txt.gz)."
msgstr ""
"Die Debconf-Spezifikation (/usr/share/doc/debian-policy/"
"debconf_specification.txt.gz)."
# type: textblock
#: ../../debconf-apt-progress:5
msgid ""
"debconf-apt-progress - install packages using debconf to display a progress "
"bar"
msgstr ""
"debconf-apt-progress - installiere Pakete mittels Debconf zur Anzeige eines "
"Fortschrittsbalkens"
# type: verbatim
#: ../../debconf-apt-progress:9
#, no-wrap
msgid ""
" debconf-apt-progress [--] command [args ...]\n"
" debconf-apt-progress --config\n"
" debconf-apt-progress --start\n"
" debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n"
" debconf-apt-progress --stop\n"
"\n"
msgstr ""
" debconf-apt-progress [--] Befehl [Argumente ...]\n"
" debconf-apt-progress --config\n"
" debconf-apt-progress --start\n"
" debconf-apt-progress --from Wegpunkt --to Wegpunkt [--] Befehl [Argumente ...]\n"
" debconf-apt-progress --stop\n"
"\n"
# type: textblock
#: ../../debconf-apt-progress:17
msgid ""
"B<debconf-apt-progress> installs packages using debconf to display a "
"progress bar. The given I<command> should be any command-line apt frontend; "
"specifically, it must send progress information to the file descriptor "
"selected by the C<APT::Status-Fd> configuration option, and must keep the "
"file descriptors nominated by the C<APT::Keep-Fds> configuration option open "
"when invoking debconf (directly or indirectly), as those file descriptors "
"will be used for the debconf passthrough protocol."
msgstr ""
"B<debconf-apt-progress> installiert Pakete und verwendet Debconf, um einen "
"Fortschrittsbalken anzuzeigen. Der ?bergeben I<Befehl> sollte eine der "
"Kommandozeilenoberfl?chen von Apt sein; insbesondere muss er "
"Fortschrittsinformationen an den durch die Konfigurationsoption C<APT::"
"Status-Fd> ausgew?hlten Dateideskriptor senden und muss den durch die "
"Konfigurationsoption C<APT::Keep-Fds> bestimmten Dateideskriptor beim Aufruf "
"von Debconf (direkt oder indirekt) offen lassen, da diese Deskriptoren f?r "
"das Debconf-weiterleiungsprotokoll benutzt werden."
# type: textblock
#: ../../debconf-apt-progress:25
msgid ""
"The arguments to the command you supply should generally include B<-y> (for "
"B<apt-get> or B<aptitude>) or similar to avoid the apt frontend prompting "
"for input. B<debconf-apt-progress> cannot do this itself because the "
"appropriate argument may differ between apt frontends."
msgstr ""
"Die Argumente zum Befehl sollten im allgemeinen B<-y> (f?r B<apt-get> oder "
"B<aptitude>) oder ?hnliches enthalten, um die Apt-Oberfl?che daran zu "
"hindern, um Eingaben zu bitten. B<debconf-apt-progress> kann dies nicht "
"selbst erledigen, da das korrekte Argument bei verschiedenen Apt-Oberfl?chen "
"verschieden sein kann."
# type: textblock
#: ../../debconf-apt-progress:30
msgid ""
"The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to "
"create a progress bar with multiple segments for different stages of "
"installation, provided that the caller is a debconf confmodule. The caller "
"may also interact with the progress bar itself using the debconf protocol if "
"it so desires."
msgstr ""
"Die Optionen B<--start>, B<--stop>, B<--from> und B<--to> k?nnen zum "
"Erstellen eines Fortschritsbalkens mit mehreren Segmenten f?r verschiedene "
"Stufen der Installation verwandt werden, vorausgesetzt das der Aufrufende "
"ein Debconf-Confmodule ist. Der Aufrufende darf mit dem Debconf-Protokoll "
"auch mit dem Fortschrittsbalken selbst interagieren falls er dies w?nscht."
# type: textblock
#: ../../debconf-apt-progress:36
msgid ""
"debconf locks its config database when it starts up, which makes it "
"unfortunately inconvenient to have one instance of debconf displaying the "
"progress bar and another passing through questions from packages being "
"installed. If you're using a multiple-segment progress bar, you'll need to "
"eval the output of the B<--config> option before starting the debconf "
"frontend to work around this. See L<the EXAMPLES section/EXAMPLES> below."
msgstr ""
"Debconf sperrt seine Konfigurationsdatenbank beim Starten, wodurch es "
"unpraktisch wird, eine Instanz zur Darstellung des Fortschrittsbalkens und "
"eine andere zur Weitergabe der Fragen von zu-installierenden Paketen zu "
"verwenden. Falls Sie einen Fortschrittsbalken mit mehreren Segmenten "
"verwenden, m?ssen SIe die Ausgabe der Option B<--config> vor dem Starten "
"der Debconf-Oberfl?che auswerten, um dies zu umgehen. Lesen Sie L<den "
"Abschnitt BEISPIELE/BEISPIELE> unten."
# type: =item
#: ../../debconf-apt-progress:47
msgid "B<--config>"
msgstr "B<--config>"
# type: textblock
#: ../../debconf-apt-progress:49
msgid ""
"Print environment variables necessary to start up a progress bar frontend."
msgstr ""
"Gebe die notwendigen Variablen aus, um die Fortschrittsbalken-Oberfl?che zu "
"starten."
# type: =item
#: ../../debconf-apt-progress:51
msgid "B<--start>"
msgstr "B<--start>"
# type: textblock
#: ../../debconf-apt-progress:53
msgid ""
"Start up a progress bar, running from 0 to 100 by default. Use B<--from> and "
"B<--to> to use other endpoints."
msgstr ""
"Beginne einen Fortschrittsbalken, standardm??ig von 0 bis 100. Verwenden Sie "
"B<--from> und B<--to> um andere Endpunkte zu benutzen."
# type: =item
#: ../../debconf-apt-progress:56
msgid "B<--from> I<waypoint>"
msgstr "B<--from> I<Wegpunkt>"
# type: textblock
#: ../../debconf-apt-progress:58
msgid ""
"If used with B<--start>, make the progress bar begin at I<waypoint> rather "
"than 0."
msgstr ""
"Falls mit B<--start> benutzt, wird der Fortschrittsbalken bei I<Wegpunkt> "
"statt bei 0 beginnen."
# type: textblock
#: ../../debconf-apt-progress:61
msgid ""
"Otherwise, install packages with their progress bar beginning at this "
"\"waypoint\". Must be used with B<--to>."
msgstr ""
"Andernfalls installiert Pakete mit ihrem Fortschrittsbalken beginnen an "
"diesem ?Wegpunkt?. Muss mit B<--to> verwendet werden."
# type: =item
#: ../../debconf-apt-progress:64
msgid "B<--to> I<waypoint>"
msgstr "B<--to> I<Wegpunkt>"
# type: textblock
#: ../../debconf-apt-progress:66
msgid ""
"If used with B<--start>, make the progress bar end at I<waypoint> rather "
"than 100."
msgstr ""
"Falls mit B<--start> benutzt, wird der Fortschrittsbalken bei I<Wegpunkt> "
"statt bei 100 enden."
# type: textblock
#: ../../debconf-apt-progress:69
msgid ""
"Otherwise, install packages with their progress bar ending at this \"waypoint"
"\". Must be used with B<--from>."
msgstr ""
"Andernfalls installiert Pakete mit ihrem Fortschrittsbalken endend an diesem "
"?Wegpunkt?. Muss mit B<--from> verwendet werden."
# type: =item
#: ../../debconf-apt-progress:72
msgid "B<--stop>"
msgstr "B<--stop>"
# type: textblock
#: ../../debconf-apt-progress:74
msgid "Stop a running progress bar."
msgstr "Stoppt einen laufenden Fortschrittsbalken."
# type: =item
#: ../../debconf-apt-progress:76
msgid "B<--no-progress>"
msgstr "B<--no-progress>"
# type: textblock
#: ../../debconf-apt-progress:78
msgid ""
"Avoid starting, stopping, or stepping the progress bar. Progress messages "
"from apt, media change events, and debconf questions will still be passed "
"through to debconf."
msgstr ""
"Vermeide das Starten, Stoppen oder Fortschreiten des Fortschrittsbalkens. "
"Fortschrittsnachrichten von Apt, Meldungen ?ber ge?nderte Medien und Fragen "
"von Debconf werden noch an Debconf weitergegeben."
# type: =item
#: ../../debconf-apt-progress:82
msgid "B<--dlwaypoint> I<percentage>"
msgstr "B<--dlwaypoint> I<Prozent>"
# type: textblock
#: ../../debconf-apt-progress:84
msgid ""
"Specify what percent of the progress bar to use for downloading packages. "
"The remainder will be used for installing packages. The default is to use "
"15% for downloading and the remaining 85% for installing."
msgstr ""
"Legt fest, welchen Prozentanteil des Fortschrittsbalkens zum Herunterladen "
"von Paketen verwandt wird. Der Rest wird zur Installation von Paketen "
"verwandt. Standardm??ig werden 15% zum Herunterladen und die verbleibenden "
"85% f?r die Installation verwandt."
# type: =item
#: ../../debconf-apt-progress:88
msgid "B<--logfile> I<file>"
msgstr "B<--logfile> I<Datei>"
# type: textblock
#: ../../debconf-apt-progress:90
msgid "Send the normal output from apt to the given file."
msgstr "Schicke die normale Ausgabe von Apt in die angegebene Datei."
# type: =item
#: ../../debconf-apt-progress:92
msgid "B<--logstderr>"
msgstr "B<--logstderr>"
# type: textblock
#: ../../debconf-apt-progress:94
msgid ""
"Send the normal output from apt to stderr. If you supply neither B<--"
"logfile> nor B<--logstderr>, the normal output from apt will be discarded."
msgstr ""
"Schicke die normale Ausgabe von Apt nach Stderr. Falls Sie weder die Option "
"B<--logfile> noch B<--logstderr> verwenden, wird die normale Ausgabe von "
"Apt verworfen."
# type: =item
#: ../../debconf-apt-progress:98
msgid "B<-->"
msgstr "B<-->"
# type: textblock
#: ../../debconf-apt-progress:100
msgid ""
"Terminate options. Since you will normally need to give at least the B<-y> "
"argument to the command being run, you will usually need to use B<--> to "
"prevent that being interpreted as an option to B<debconf-apt-progress> "
"itself."
msgstr ""
"Beende Optionen. Da Sie normalerweise mindestens das Argument B<-y> an den "
"ausgef?hrten Befehl ?bergeben m?ssen, werden sie gew?hnlich B<--> verwenden "
"m?ssen, um dessen Interpretation als Option f?r B<debconf-apt-progress> "
"selbst zu verhindern."
# type: textblock
#: ../../debconf-apt-progress:107
msgid ""
"Install the GNOME desktop and an X window system development environment "
"within a progress bar:"
msgstr ""
"Installiere den GNOME-Desktop und eine X-Window-System-Entwicklungsumgebung "
"mit einem Fortschrittsbalken:"
# type: verbatim
#: ../../debconf-apt-progress:110
#, no-wrap
msgid ""
" debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n"
"\n"
msgstr ""
" debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n"
"\n"
# type: textblock
#: ../../debconf-apt-progress:112
msgid ""
"Install the GNOME, KDE, and XFCE desktops within a single progress bar, "
"allocating 45% of the progress bar for each of GNOME and KDE and the "
"remaining 10% for XFCE:"
msgstr ""
"Installiere die GNOME-, KDE- und XFCE-Desktops innerhalb eines einzigen "
"Fortschrittsbalkens, wobei 45% des Fortschrittsbalkens jeweils f?r GNME und "
"KDE zugeordnet werden und die verbliebenen 10% f?r XFCE:"
# type: verbatim
#: ../../debconf-apt-progress:116
#, no-wrap
msgid ""
" #! /bin/sh\n"
" set -e\n"
" case $1 in\n"
" '')\n"
" eval \"$(debconf-apt-progress --config)\"\n"
" \"$0\" debconf\n"
" ;;\n"
" debconf)\n"
" . /usr/share/debconf/confmodule\n"
" debconf-apt-progress --start\n"
" debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n"
" debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n"
" debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n"
" debconf-apt-progress --stop\n"
" ;;\n"
" esac\n"
"\n"
msgstr ""
" #! /bin/sh\n"
" set -e\n"
" case $1 in\n"
" '')\n"
" eval \"$(debconf-apt-progress --config)\"\n"
" \"$0\" debconf\n"
" ;;\n"
" debconf)\n"
" . /usr/share/debconf/confmodule\n"
" debconf-apt-progress --start\n"
" debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n"
" debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n"
" debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n"
" debconf-apt-progress --stop\n"
" ;;\n"
" esac\n"
"\n"
# type: =head1
#: ../../debconf-apt-progress:133
msgid "RETURN CODE"
msgstr "R?CKGABEWERT"
# type: textblock
#: ../../debconf-apt-progress:135
msgid ""
"The exit code of the specified command is returned, unless the user hit the "
"cancel button on the progress bar. If the cancel button was hit, a value of "
"30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 "
"will be returned."
msgstr ""
"Der Exit-Code des angegeben Befehls wird zur?ckgegeben, falls der Benutzer "
"nicht den Knopf ?Abbrechen? beim Fortschrittsbalken gedr?ckt hat. Falls "
"dieser Knopf gedr?ckt worden, wird der Wert 30 zur?ckgegeben. Um "
"Mehrdeutigkeiten zu vermeiden, wird ein Wert von 3 zur?ckgegeben, falls der "
"Befehl 30 zur?cklieferte."
# type: =head1
#: ../../debconf-apt-progress:632
msgid "AUTHORS"
msgstr "AUTOREN"
# type: textblock
#: ../../debconf-apt-progress:634
msgid "Colin Watson <cjwatson at debian.org>"
msgstr "Colin Watson <cjwatson at debian.org>"
# type: textblock
#: ../../debconf-escape:5
msgid "debconf-escape - helper when working with debconf's escape capability"
msgstr ""
# type: verbatim
#: ../../debconf-escape:9
#, no-wrap
msgid ""
" debconf-escape -e < unescaped-text\n"
" debconf-escape -u < escaped-text\n"
"\n"
msgstr ""
# type: textblock
#: ../../debconf-escape:14
msgid ""
"When debconf has the 'escape' capability set, it will expect commands you "
"send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> "
"respectively) and will in turn escape backslashes and newlines in its "
"replies. This can be used, for example, to substitute multi-line strings "
"into templates, or to get multi-line extended descriptions reliably using "
"C<METAGET>."
msgstr ""
# type: textblock
#: ../../debconf-escape:23
msgid "L<debconf-devel(7)> (available in the debconf-doc package)"
msgstr "L<debconf-devel(7)> (verf?gbar in dem Paket debconf-doc)"
# type: textblock
#: ../../debconf-communicate:5
msgid "debconf-communicate - communicate with debconf"
msgstr "debconf-communicate - kommuniziere mit Debconf"
# type: verbatim
#: ../../debconf-communicate:11
#, no-wrap
msgid ""
" echo commands | debconf-communicate [options] [package]\n"
"\n"
msgstr ""
" echo Befehle | debconf-communicate [Optionen] [Paket]\n"
"\n"
# type: textblock
#: ../../debconf-communicate:15
msgid ""
"B<debconf-communicate> allows you to communicate with debconf on the fly, "
"from the command line. The package argument is the name of the package which "
"you are pretending to be as you communicate with debconf, and it may be "
"omitted if you are lazy. It reads commands in the form used by the debconf "
"protocol from stdin. For documentation on the available commands and their "
"usage, see the debconf specification."
msgstr ""
# type: textblock
#: ../../debconf-communicate:22
msgid ""
"The commands are executed in sequence. The textual return code of each is "
"printed out to standard output."
msgstr ""
# type: textblock
#: ../../debconf-communicate:25
msgid ""
"The return value of this program is the numeric return code of the last "
"executed command."
msgstr ""
# type: SH
#: ../../debconf-communicate:28 debconf.conf.5:444
#, no-wrap
msgid "EXAMPLE"
msgstr "BEISPIEL"
# type: verbatim
#: ../../debconf-communicate:30
#, no-wrap
msgid ""
" echo get debconf/frontend | debconf-communicate\n"
"\n"
msgstr ""
" echo get debconf/frontend | debconf-communicate\n"
"\n"
# type: textblock
#: ../../debconf-communicate:32
msgid "Print out the value of the debconf/frontend question."
msgstr "Gibt den Wert der Debconf-/Oberfl?chen-Frage aus."
# type: =head1
#: ../../debconf-communicate:34 ../../debconf-loadtemplate:24
#: ../../debconf-set-selections:32
msgid "WARNING"
msgstr "WARNUNG"
# type: textblock
#: ../../debconf-communicate:36
msgid ""
"This program should never be used from a maintainer script of a package that "
"uses debconf! It may however, be useful in debugging."
msgstr ""
"Dieses Programm sollte niemals von einem Betreuerskript eines Pakets "
"verwendet werden, das Debconf verwendet! Es kann allerdings bei der "
"Fehlersuche n?tzlich sein."
# type: textblock
#: ../../debconf-communicate:41
msgid "L<debconf-loadtemplate(1)>"
msgstr "L<debconf-loadtemplate(1)>"
# type: textblock
#: ../../debconf-copydb:5
msgid "debconf-copydb - copy a debconf database"
msgstr "debconf-copydb - kopiere eine Debconf-Datenbank"
# type: verbatim
#: ../../debconf-copydb:18
#, no-wrap
msgid ""
" debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n"
"\n"
msgstr ""
" debconf-copydb QuellDB ZielDB [--pattern=Muster] [--owner-pattern=Muster] [--config=Foo:bar]\n"
"\n"
# type: textblock
#: ../../debconf-copydb:31
msgid ""
"B<debconf-copydb> copies items from an existing debconf database into "
"another, possibly new database. The two databases may have different "
"formats; if so a conversion will automatically be done."
msgstr ""
"B<debconf-copydb> kopiert Eintr?ge aus einer existierenden Debconf-Datenbank "
"in eine andere, m?glicherweise neue Datenbank. Die zwei Datenbanken d?fen "
"verschieden Formate haben, in diesem Falle wird automatisch eine "
"Konvertierung durchgef?hrt."
# type: =item
#: ../../debconf-copydb:39
msgid "I<sourcedb>"
msgstr "I<QuellDB>"
# type: textblock
#: ../../debconf-copydb:41
msgid ""
"The name of the source database. Typically it will be defined in your "
"debconf.conf (or .debconfrc) file."
msgstr ""
"Der Name der Quelldatenbank. Wird typischerweise in Ihrer debconf.conf- "
"(oder .debconfrc-)Datei definiert."
# type: =item
#: ../../debconf-copydb:44
msgid "I<destdb>"
msgstr "I<ZielDB>"
# type: textblock
#: ../../debconf-copydb:46
msgid ""
"The name of the destination database. It may be defined in debconf.conf or ."
"debconfrc, or you might define it on the command line (see below)."
msgstr ""
"Der Name der Zieldatenbank. Sie kann in Ihrer debconf.conf oder .debconfrc "
"definiert sein, oder sie k?nnten Sie auf der Kommandozeile definieren (siehe "
"unten)."
# type: =item
#: ../../debconf-copydb:50
msgid "B<-p> I<pattern>, B<--pattern> I<pattern>"
msgstr "B<-p> I<Muster>, B<--pattern> I<Muster>"
# type: textblock
#: ../../debconf-copydb:52
msgid ""
"If this is specified, only items in I<sourcedb> whose names match the "
"pattern will be copied."
msgstr ""
"Falls dies angegeben ist, werden nur Eintr?ge aus I<QuellDB> kopiert, deren "
"Name auf Muster passen."
# type: =item
#: ../../debconf-copydb:55
msgid "B<--owner-pattern> I<pattern>"
msgstr "B<--owner-pattern> I<Muster>"
# type: textblock
#: ../../debconf-copydb:57
msgid ""
"If this is specified, only items in I<sourcedb> whose owners match the "
"pattern will be copied."
msgstr ""
"Falls dies angegeben ist, werden nur Eintr?ge aus I<QuellDB> kopiert, deren "
"Eigent?mer auf Muster passen."
# type: =item
#: ../../debconf-copydb:60
msgid "B<-c> I<foo:bar>, B<--config> I<Foo:bar>"
msgstr "B<-c> I<foo:bar>, B<--config> I<Foo:bar>"
# type: textblock
#: ../../debconf-copydb:62
msgid "Set option Foo to bar. This is similar to writing:"
msgstr "Setze Option Foo auf bar. Dies ist ?hnlich zu Folgendem:"
# type: verbatim
#: ../../debconf-copydb:64
#, no-wrap
msgid ""
" Foo: bar\n"
"\n"
msgstr ""
" Foo: bar\n"
"\n"
# type: textblock
#: ../../debconf-copydb:66
msgid ""
"In debconf.conf, except you probably want to leave off the space on the "
"command line (or quote it: \"Foo: bar\"). Generally must be used multiple "
"times, to build up a full configuration stanza. While blank lines are used "
"to separate stanzas in debconf.conf, this program will assume that \"Name:"
"dbname\" denotes the beginning of a new stanza."
msgstr ""
# type: verbatim
#: ../../debconf-copydb:76
#, no-wrap
msgid ""
" debconf-copydb configdb backup\n"
"\n"
msgstr ""
# type: textblock
#: ../../debconf-copydb:78
msgid ""
"Copy all of configdb to backup, assuming you already have the backup "
"database defined in debconf.conf."
msgstr ""
# type: verbatim
#: ../../debconf-copydb:81
#, no-wrap
msgid ""
" debconf-copydb configdb newdb --pattern='^slrn/' \\\n"
" \t--config=Name:newdb --config=Driver:File \\\n"
"\t--config=Filename:newdb.dat\n"
"\n"
msgstr ""
# type: textblock
#: ../../debconf-copydb:85
msgid ""
"Copy slrn's data out of configdb, and into newdb. newdb is not defined in "
"the rc file, so the --config switches set up the database on the fly."
msgstr ""
# type: verbatim
#: ../../debconf-copydb:88
#, no-wrap
msgid ""
" debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n"
" \t-c InFd:none --pattern='^foo/'\n"
"\n"
msgstr ""
# type: textblock
#: ../../debconf-copydb:91
msgid "Spit out all the items in the debconf database related to package foo."
msgstr ""
"Gebe alle Eintr?ge in der Debconf-Datenbank mit Bezug zum Paket foo aus."
# type: verbatim
#: ../../debconf-copydb:93
#, no-wrap
msgid ""
" debconf-copydb configdb pipe --config=Name:pipe \\\n"
" --config=Driver:Pipe --config=InFd:none | \\\n"
" \tssh remotehost debconf-copydb pipe configdb \\\n"
"\t\t--config=Name:pipe --config=Driver:Pipe\n"
"\n"
msgstr ""
# type: textblock
#: ../../debconf-copydb:98
msgid ""
"This uses the special purpose pipe driver to copy a database to a remote "
"system."
msgstr ""
# type: textblock
#: ../../debconf-copydb:103
msgid "L<debconf.conf(5)>"
msgstr "L<debconf.conf(5)>"
# type: textblock
#: ../../debconf-getlang:5
msgid "debconf-getlang - extract a language from a templates file"
msgstr "debconf-getlang - extrahiere eine Sprache aus einer Vorlagendatei"
# type: verbatim
#: ../../debconf-getlang:17
#, no-wrap
msgid ""
" debconf-getlang lang master [translation]\n"
" debconf-getlang --stats master translation [...]\n"
"\n"
msgstr ""
" debconf-getlang Sprache Hauptdatei [?bersetzung]\n"
" debconf-getlang --stats Hauptdatei ?bersetzung [...]\n"
"\n"
# type: textblock
#: ../../debconf-getlang:22
msgid ""
"Note: This utility is deprecated; you should switch to using the po-debconf "
"package."
msgstr ""
"Hinweis: Dieses Hilfswerkzeug ist veraltet. Sie sollten auf das Paket po-"
"debconf umstellen."
# type: textblock
#: ../../debconf-getlang:24
msgid ""
"This program helps make and manage translations of debconf templates. There "
"are basically three situations in which this program might be called:"
msgstr ""
"Dieses Programm hilft beim Erstellen und Verwalten von ?bersetzungen von "
"Debconf-Vorlagen. Es gibt im Prinzip drei Situationen, in denen dieses "
"Programm aufgerufen werden k?nnte:"
# type: =item
#: ../../debconf-getlang:29
msgid "A translation is just being started."
msgstr "Eine ?bersetzung wird gerade begonnen."
# type: textblock
#: ../../debconf-getlang:31
msgid ""
"You want to provide the translator with a file they can work on that has the "
"English fields from your templates file, plus blank Field-ll fields for the "
"target language that they can fill in."
msgstr ""
# type: textblock
#: ../../debconf-getlang:35
msgid ""
"To do this, run the program with first parameter being the code for the "
"language that is being translated to, and the second parameter being the "
"filename of the English templates file."
msgstr ""
# type: =item
#: ../../debconf-getlang:39
msgid "A translation is well under way."
msgstr ""
# type: textblock
#: ../../debconf-getlang:41
msgid ""
"You have changed some English text, or added more items to your templates "
"file, and you want to send the translators a file with the English text plus "
"their current translations (or you are the translator, and you want to "
"generate such a file for your own use)."
msgstr ""
# type: textblock
#: ../../debconf-getlang:46
msgid ""
"To accomplish this, run the program with the first parameter being the the "
"code for the language that is being translated to, the second parameter "
"being the filename of the master English templates file, and the third "
"parameter being the filename of the current translated file."
msgstr ""
# type: textblock
#: ../../debconf-getlang:51
msgid ""
"When run this way, the program is smart enough to notice fuzzy translations. "
"For example a fuzzy Description will be output as Description-<lang>-fuzzy, "
"and a new, blank Description-<lang> will be added. Translators should "
"remove the -fuzzy fields as they correct the fuzzy translations."
msgstr ""
# type: =item
#: ../../debconf-getlang:57
msgid "Checking the status of a translation"
msgstr "?berpr?fe den Status einer ?bersetzung"
# type: textblock
#: ../../debconf-getlang:59
msgid ""
"To check the status of a translation, use the --status flag, and pass the "
"english template file as the first parameter, and all the other translated "
"templates after that. It will output statistics for each of them. For "
"example:"
msgstr ""
# type: verbatim
#: ../../debconf-getlang:64
#, no-wrap
msgid ""
" debconf-getlang --stats debian/templates debian/templates.*\n"
"\n"
msgstr ""
# type: =head1
#: ../../debconf-getlang:68
msgid "NOTE"
msgstr ""
# type: textblock
#: ../../debconf-getlang:70
msgid ""
"Note that the text in the generated templates may be word-wrapped by debconf."
msgstr ""
# type: textblock
#: ../../debconf-getlang:75
msgid "L<debconf-mergetemplate(1)>"
msgstr "L<debconf-mergetemplate(1)>"
# type: textblock
#: ../../debconf-get-selections:5
msgid "debconf-get-selections - output contents of debconf database"
msgstr "debconf-get-selections - gibt den Inhalt der Debconf-Datenbank aus"
# type: textblock
#: ../../debconf-get-selections:9
msgid "debconf-get-selections [--installer]"
msgstr "debconf-get-selections [--installer]"
# type: textblock
#: ../../debconf-get-selections:13
msgid ""
"Output the current debconf database in a format understandable by debconf-"
"set-selections."
msgstr ""
# type: textblock
#: ../../debconf-get-selections:16
msgid ""
"To dump the debconf database of the debian-installer, from /var/log/"
"installer/cdebconf, use the --installer parameter."
msgstr ""
# type: textblock
#: ../../debconf-get-selections:76 ../../debconf-set-selections:230
msgid "Petter Reinholdtsen <pere at hungry.com>"
msgstr "Petter Reinholdtsen <pere at hungry.com>"
# type: textblock
#: ../../debconf-loadtemplate:5
msgid "debconf-loadtemplate - load template file into debconf database"
msgstr ""
# type: verbatim
#: ../../debconf-loadtemplate:15
#, no-wrap
msgid ""
" debconf-loadtemplate owner file [file ..]\n"
"\n"
msgstr ""
" debconf-loadtemplate Eigent?mer Datei [Datei ..]\n"
"\n"
# type: textblock
#: ../../debconf-loadtemplate:19
msgid ""
"Loads one or more template files into the debconf database. The first "
"parameter specifies the owner of the templates (typically, the owner is the "
"name of a debian package). The remaining parameters are template files to "
"load."
msgstr ""
# type: textblock
#: ../../debconf-loadtemplate:26
msgid ""
"This program should never be used from a maintainer script of a package that "
"uses debconf! It may however, be useful in debugging, or to seed the debconf "
"database."
msgstr ""
# type: textblock
#: ../../debconf-loadtemplate:32
msgid "L<debconf-communicate(1)>"
msgstr "L<debconf-communicate(1)>"
# type: textblock
#: ../../debconf-mergetemplate:5
msgid "debconf-mergetemplate - merge together multiple debconf template files"
msgstr ""
# type: verbatim
#: ../../debconf-mergetemplate:18
#, no-wrap
msgid ""
" debconf-mergetemplate [options] [templates.ll ...] templates\n"
"\n"
msgstr ""
# type: textblock
#: ../../debconf-mergetemplate:22
msgid ""
"Note: This utility is deprecated. You should switch to using po-debconf's "
"po2debconf program."
msgstr ""
"Hinweis: Dieses Hilfswerkzeug ist veraltet. Sie sollten auf die Verwendung "
"des Programms po2debconf von Po-debconf umstellen."
# type: textblock
#: ../../debconf-mergetemplate:25
msgid ""
"This program is useful if you have multiple debconf templates files which "
"you want to merge together into one big file. All the specified files will "
"be read in, merged, and output to standard output."
msgstr ""
# type: textblock
#: ../../debconf-mergetemplate:29
msgid ""
"This can be especially useful if you are dealing with translated template "
"files. In this case, you might have your main template file, plus several "
"other files provided by the translators. These files will have translated "
"fields in them, and maybe the translators left in the english versions of "
"the fields they translated, for their reference."
msgstr ""
# type: textblock
#: ../../debconf-mergetemplate:35
msgid ""
"So, you want to merge together all the translated templates files with your "
"main templates file. Any fields that are unique to the translated files need "
"to be added in to the correct templates, but any fields they have in common "
"should be superseded by the fields in the main file (which might be more up-"
"to-date)."
msgstr ""
# type: textblock
#: ../../debconf-mergetemplate:41
msgid ""
"This program handles that case properly, just list each of the translated "
"templates files, and then your main templates file last."
msgstr ""
# type: =item
#: ../../debconf-mergetemplate:48
msgid "--outdated"
msgstr "--outdated"
# type: textblock
#: ../../debconf-mergetemplate:50
msgid ""
"Merge in even outdated translations. The default is to drop them with a "
"warning message."
msgstr ""
# type: =item
#: ../../debconf-mergetemplate:53
msgid "--drop-old-templates"
msgstr "--drop-old-templates"
# type: textblock
#: ../../debconf-mergetemplate:55
msgid ""
"If a translation has an entire template that is not in the master file (and "
"thus is probably an old template), drop that entire template."
msgstr ""
# type: textblock
#: ../../debconf-mergetemplate:62
msgid "L<debconf-getlang(1)>"
msgstr "L<debconf-getlang(1)>"
# type: textblock
#: ../../debconf-set-selections:5
msgid ""
"debconf-set-selections - insert new default values into the debconf database"
msgstr ""
# type: verbatim
#: ../../debconf-set-selections:21
#, no-wrap
msgid ""
" debconf-set-selections file\n"
" debconf-get-selections | ssh newhost debconf-set-selections\n"
"\n"
msgstr ""
# type: textblock
#: ../../debconf-set-selections:26
msgid ""
"B<debconf-set-selections> can be used to pre-seed the debconf database with "
"answers, or to change answers in the database. Each question will be marked "
"as seen to prevent debconf from asking the question interactively."
msgstr ""
# type: textblock
#: ../../debconf-set-selections:30
msgid "Reads from a file if a filename is given, otherwise from stdin."
msgstr ""
# type: textblock
#: ../../debconf-set-selections:34
msgid ""
"Only use this command to seed debconf values for packages that will be or "
"are installed. Otherwise you can end up with values in the database for "
"uninstalled packages that will not go away, or with worse problems involving "
"shared values. It is recommended that this only be used to seed the database "
"if the originating machine has an identical install."
msgstr ""
# type: =head1
#: ../../debconf-set-selections:40
msgid "DATA FORMAT"
msgstr "DATENFORMAT"
# type: textblock
#: ../../debconf-set-selections:42
msgid ""
"The data is a series of lines. Lines beginning with a # character are "
"comments. Blank lines are ignored. All other lines set the value of one "
"question, and should contain four values, each separated by one character of "
"whitespace. The first value is the name of the package that owns the "
"question. The second is the name of the question, the third value is the "
"type of this question, and the fourth value (through the end of the line) "
"is the value to use for the answer of the question."
msgstr ""
# type: textblock
#: ../../debconf-set-selections:50
msgid ""
"Alternatively, the third value can be \"seen\"; then the preseed line only "
"controls whether the question is marked as seen in debconf's database. Note "
"that preseeding a question's value defaults to marking that question as "
"seen, so to override the default value without marking a question seen, you "
"need two lines."
msgstr ""
# type: textblock
#: ../../debconf-set-selections:56
msgid ""
"Lines can be continued to the next line by ending them with a \"\\\" "
"character."
msgstr ""
# type: verbatim
#: ../../debconf-set-selections:61
#, no-wrap
msgid ""
" # Force debconf priority to critical.\n"
" debconf debconf/priority select critical\n"
"\n"
msgstr ""
# type: verbatim
#: ../../debconf-set-selections:64
#, no-wrap
msgid ""
" # Override default frontend to readline, but allow user to select.\n"
" debconf debconf/frontend select readline\n"
" debconf debconf/frontend seen false\n"
"\n"
msgstr ""
# type: =item
#: ../../debconf-set-selections:72
msgid "B<--verbose>, B<-v>"
msgstr "B<--verbose>, B<-v>"
# type: textblock
#: ../../debconf-set-selections:74
msgid "verbose output"
msgstr ""
# type: =item
#: ../../debconf-set-selections:76
msgid "B<--checkonly>, B<-c>"
msgstr "B<--checkonly>, B<-c>"
# type: textblock
#: ../../debconf-set-selections:78
msgid "only check the input file format, do not save changes to database"
msgstr ""
# type: textblock
#: ../../debconf-set-selections:84
msgid "L<debconf-get-selections(1)> (available in the debconf-utils package)"
msgstr ""
# type: textblock
#: ../../debconf-show:5
msgid "debconf-show - query the debconf database"
msgstr ""
# type: verbatim
#: ../../debconf-show:21
#, no-wrap
msgid ""
" debconf-show packagename [...] [--db=dbname]\n"
" debconf-show --listowners [--db=dbname]\n"
" debconf-show --listdbs\n"
"\n"
msgstr ""
# type: textblock
#: ../../debconf-show:27
msgid "B<debconf-show> lets you query the debconf database in different ways."
msgstr ""
# type: textblock
#: ../../debconf-show:29
msgid ""
"The most common use is \"debconf-show packagename\", which displays all "
"items in the debconf database owned by a given package, and their current "
"values. Questions that have been asked already are prefixed with an '*'."
msgstr ""
# type: textblock
#: ../../debconf-show:33
msgid ""
"This can be useful as a debugging aid, and especially handy in bug reports "
"involving a package's use of debconf."
msgstr ""
# type: =item
#: ../../debconf-show:40
msgid "B<--db=>I<dbname>"
msgstr ""
# type: textblock
#: ../../debconf-show:42
msgid ""
"Specify the database to query. By default, debconf-show queries the main "
"database."
msgstr ""
# type: =item
#: ../../debconf-show:45
msgid "B<--listowners>"
msgstr ""
# type: textblock
#: ../../debconf-show:47
msgid ""
"Lists all owners of questions in the database. Generally an owner is "
"equivalent to a debian package name."
msgstr ""
# type: =item
#: ../../debconf-show:50
msgid "B<--listdbs>"
msgstr ""
# type: textblock
#: ../../debconf-show:52
msgid "Lists all available databases."
msgstr ""
# type: textblock
#: ../../debconf-show:156
msgid "Joey Hess <joeyh at debian.org> and Sylvain Ferriol"
msgstr ""
# type: textblock
#: ../../dpkg-preconfigure:5
msgid ""
"dpkg-preconfigure - let packages ask questions prior to their installation"
msgstr ""
# type: verbatim
#: ../../dpkg-preconfigure:9
#, no-wrap
msgid ""
" dpkg-preconfigure [options] package.deb\n"
"\n"
msgstr ""
# type: verbatim
#: ../../dpkg-preconfigure:11
#, no-wrap
msgid ""
" dpkg-preconfigure --apt\n"
"\n"
msgstr ""
# type: textblock
#: ../../dpkg-preconfigure:15
msgid ""
"B<dpkg-preconfigure> lets packages ask questions before they are installed. "
"It operates on a set of debian packages, and all packages that use debconf "
"will have their config script run so they can examine the system and ask "
"questions."
msgstr ""
# type: textblock
#: ../../dpkg-preconfigure:30
msgid ""
"Set the lowest priority of questions you are interested in. Any questions "
"with a priority below the selected priority will be ignored and their "
"default answers will be used."
msgstr ""
# type: =item
#: ../../dpkg-preconfigure:34
msgid "B<--apt>"
msgstr ""
# type: textblock
#: ../../dpkg-preconfigure:36
msgid ""
"Run in apt mode. It will expect to read a set of package filenames from "
"stdin, rather than getting them as parameters. Typically this is used to "
"make apt run dpkg-preconfigure on all packages before they are installed. "
"To do this, add something like this to /etc/apt/apt.conf:"
msgstr ""
# type: verbatim
#: ../../dpkg-preconfigure:41
#, no-wrap
msgid ""
" // Pre-configure all packages before\n"
" // they are installed.\n"
" DPkg::Pre-Install-Pkgs {\n"
" \t\"dpkg-preconfigure --apt --priority=low\";\n"
" };\n"
"\n"
msgstr ""
# type: =item
#: ../../dpkg-preconfigure:47 ../../dpkg-reconfigure:67
msgid "B<-h>, B<--help>"
msgstr ""
# type: textblock
#: ../../dpkg-preconfigure:49 ../../dpkg-reconfigure:69
msgid "Display usage help."
msgstr ""
# type: textblock
#: ../../dpkg-preconfigure:57 ../../dpkg-reconfigure:77
msgid "L<debconf(7)>"
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:5
msgid "dpkg-reconfigure - reconfigure an already installed package"
msgstr ""
# type: verbatim
#: ../../dpkg-reconfigure:9
#, no-wrap
msgid ""
" dpkg-reconfigure [options] packages\n"
"\n"
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:13
msgid ""
"B<dpkg-reconfigure> reconfigures packages after they have already been "
"installed. Pass it the names of a package or packages to reconfigure. It "
"will ask configuration questions, much like when the package was first "
"installed."
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:24
msgid ""
"Select the frontend to use. The default frontend can be permanently changed "
"by:"
msgstr ""
# type: verbatim
#: ../../dpkg-reconfigure:27
#, no-wrap
msgid ""
" dpkg-reconfigure debconf\n"
"\n"
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:29
msgid ""
"Note that if you normally have debconf set to use the noninteractive "
"frontend, dpkg-reconfigure will use the dialog frontend instead, so you "
"actually get to reconfigure the package."
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:35
msgid ""
"Specify the minimum priority of question that will be displayed. dpkg-"
"reconfigure normally shows low priority questions no matter what your "
"default priority is. See L<debconf(7)> for a list."
msgstr ""
# type: =item
#: ../../dpkg-reconfigure:39
msgid "B<--default-priority>"
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:41
msgid ""
"Use whatever the default priority of question is, instead of forcing the "
"priority to low."
msgstr ""
# type: =item
#: ../../dpkg-reconfigure:44
msgid "B<-a>, B<--all>"
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:46
msgid ""
"Reconfigure all installed packages that use debconf. Warning: this may take "
"a long time."
msgstr ""
# type: =item
#: ../../dpkg-reconfigure:49
msgid "B<-u>, B<--unseen-only>"
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:51
msgid ""
"By default, all questions are shown, even if they have already been "
"answered. If this parameter is set though, only questions that have not yet "
"been seen will be asked."
msgstr ""
# type: =item
#: ../../dpkg-reconfigure:55
msgid "B<--force>"
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:57
msgid ""
"Force dpkg-reconfigure to reconfigure a package even if the package is in an "
"inconsistent or broken state. Use with caution."
msgstr ""
# type: =item
#: ../../dpkg-reconfigure:60
msgid "B<--no-reload>"
msgstr ""
# type: textblock
#: ../../dpkg-reconfigure:62
msgid ""
"Prevent dpkg-reconfigure from reloading templates. Use with caution; this "
"will prevent dpkg-reconfigure from repairing broken templates databases. "
"However, it may be useful in constrained environments where rewriting the "
"templates database is expensive."
msgstr ""
# type: TH
#: debconf.conf.5:1
#, no-wrap
msgid "DEBCONF.CONF"
msgstr ""
# type: Plain text
#: debconf.conf.5:4
msgid "debconf.conf - debconf configuration file"
msgstr ""
# type: Plain text
#: debconf.conf.5:12
msgid ""
"Debconf is a configuration system for Debian packages. /etc/debconf.conf and "
"~/.debconfrc are configuration files debconf uses to determine which "
"databases it should use. These databases are used for storing two types of "
"information; dynamic config data the user enters into it, and static "
"template data. Debconf offers a flexible, extensible database backend. New "
"drivers can be created with a minimum of effort, and sets of drivers can be "
"combined in various ways."
msgstr ""
# type: Plain text
#: debconf.conf.5:17
#, no-wrap
msgid ""
" # This is a sample config file that is\n"
" # sufficient to use debconf.\n"
" Config: configdb\n"
" Templates: templatedb\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:21
#, no-wrap
msgid ""
" Name: configdb\n"
" Driver: File\n"
" Filename: /var/cache/debconf/config.dat\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:26
#, no-wrap
msgid ""
" Name: templatedb\n"
" Driver: File\n"
" Mode: 644\n"
" Filename: /var/cache/debconf/templates.dat\n"
msgstr ""
# type: SH
#: debconf.conf.5:26
#, no-wrap
msgid "FILE FORMAT"
msgstr ""
# type: Plain text
#: debconf.conf.5:30
msgid ""
"The format of this file is a series of stanzas, each separated by at least "
"one wholly blank line. Comment lines beginning with a \"#\" character are "
"ignored."
msgstr ""
# type: Plain text
#: debconf.conf.5:33
msgid ""
"The first stanza of the file is special, is used to configure debconf as a "
"whole. Two fields are required to be in this first stanza:"
msgstr ""
# type: TP
#: debconf.conf.5:34
#, no-wrap
msgid "B<Config>"
msgstr ""
# type: Plain text
#: debconf.conf.5:37
msgid "Specifies the name of the database from which to load config data."
msgstr ""
# type: TP
#: debconf.conf.5:37
#, no-wrap
msgid "B<Templates>"
msgstr ""
# type: Plain text
#: debconf.conf.5:40
msgid "Specifies the name of the database to use for the template cache."
msgstr ""
# type: Plain text
#: debconf.conf.5:43
msgid "Additional fields that can be used include:"
msgstr ""
# type: TP
#: debconf.conf.5:44
#, no-wrap
msgid "B<Frontend>"
msgstr ""
# type: Plain text
#: debconf.conf.5:48
msgid ""
"The frontend Debconf should use, overriding any frontend set in the debconf "
"database."
msgstr ""
# type: TP
#: debconf.conf.5:48
#, no-wrap
msgid "B<Priority>"
msgstr ""
# type: Plain text
#: debconf.conf.5:52
msgid ""
"The priority Debconf should use, overriding any priority set in the debconf "
"database."
msgstr ""
# type: TP
#: debconf.conf.5:52
#, no-wrap
msgid "B<Admin-Email>"
msgstr ""
# type: Plain text
#: debconf.conf.5:59
msgid ""
"The email address Debconf should send mail to if it needs to make sure that "
"the admin has seen an important message. Defaults to \"root\", but can be "
"set to any valid email address to send the mail there. If you prefer to "
"never have debconf send you mail, specify a blank address. This can be "
"overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable."
msgstr ""
# type: Plain text
#: debconf.conf.5:59 debconf.conf.5:395
#, no-wrap
msgid "B<Debug>"
msgstr ""
# type: Plain text
#: debconf.conf.5:67
msgid ""
"If set, this will cause debconf to output debugging information to standard "
"error. The value it is set to can be something like \"user\", \"developer\", "
"\"db\", or a regular expression. Typically, rather than setting it "
"permanently in a config file, you will only want to temporarily turn on "
"debugging, and the DEBCONF_DEBUG environment variable can be set instead to "
"accomplish that."
msgstr ""
# type: TP
#: debconf.conf.5:67
#, no-wrap
msgid "B<NoWarnings>"
msgstr ""
# type: Plain text
#: debconf.conf.5:72
msgid ""
"If set, this will make debconf not display warnings about various things. "
"This can be overridden on the fly with the DEBCONF_NOWARNINGS environment "
"variable."
msgstr ""
# type: TP
#: debconf.conf.5:72
#, no-wrap
msgid "B<Log>"
msgstr ""
# type: Plain text
#: debconf.conf.5:77
msgid ""
"Makes debconf log debugging information as it runs, to the syslog. The value "
"it is set to controls that is logged. See Debug, above for an explanation of "
"the values that can be set to control what is logged."
msgstr ""
# type: TP
#: debconf.conf.5:77
#, no-wrap
msgid "B<Terse>"
msgstr ""
# type: Plain text
#: debconf.conf.5:82
msgid ""
"If set to \"true\", makes some debconf frontends use a special terse display "
"mode that outputs as little as possible. Defaults to false. Terse mode may "
"be temporarily set via the DEBCONF_TERSE environment variable."
msgstr ""
# type: Plain text
#: debconf.conf.5:87
#, no-wrap
msgid ""
"For example, the first stanza of a file might look like this:\n"
" Config: configdb\n"
" Templates: templatedb\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:91
#, no-wrap
msgid ""
"Each remaining stanza in the file sets up a database. A database stanza\n"
"begins by naming the database:\n"
" Name: configdb\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:95
#, no-wrap
msgid ""
"Then it indicates what database driver should be used for this database.\n"
"See DRIVERS, below, for information about what drivers are available.\n"
" Driver: File\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:100
#, no-wrap
msgid ""
"You can indicate that the database is not essential to the proper\n"
"functioning of debconf by saying it is not required. This will make debconf\n"
"muddle on if the database fails for some reason.\n"
" Required: false\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:104
#, no-wrap
msgid ""
"You can mark any database as readonly and debconf will not write anything\n"
"to it.\n"
" Readonly: true\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:107
msgid ""
"You can also limit what types of data can go into the database with Accept- "
"and Reject- lines; see ACCESS CONTROLS, below."
msgstr ""
# type: Plain text
#: debconf.conf.5:112
#, no-wrap
msgid ""
"The remainder of each database stanza is used to provide configuration\n"
"specific to that driver. For example, the Text driver needs to know\n"
"a directory to put the database in, so you might say:\n"
" Filename: /var/cache/debconf/config.dat\n"
msgstr ""
# type: SH
#: debconf.conf.5:112
#, no-wrap
msgid "DRIVERS"
msgstr ""
# type: Plain text
#: debconf.conf.5:119
msgid ""
"A number of drivers are available, and more can be written with little "
"difficulty. Drivers come in two general types. First there are real drivers "
"-- drivers that actually access and store data in some kind of database, "
"which might be on the local filesystem, or on a remote system. Then there "
"are meta-drivers that combine other drivers together to form more "
"interesting systems. Let's start with the former."
msgstr ""
# type: TP
#: debconf.conf.5:120
#, no-wrap
msgid "B<File>"
msgstr ""
# type: Plain text
#: debconf.conf.5:127
msgid ""
"This database driver allows debconf to store a whole database in a single "
"flat text file. This makes it easy to archive, transfer between machines, "
"and edit. It is one of the more compact database formats in terms of disk "
"space used. It is also one of the slowest."
msgstr ""
# type: Plain text
#: debconf.conf.5:130
msgid ""
"On the downside, the entire file has to be read in each time debconf starts "
"up, and saving it is also slow."
msgstr ""
# type: Plain text
#: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309
msgid "The following things are configurable for this driver."
msgstr ""
# type: TP
#: debconf.conf.5:133
#, no-wrap
msgid "B<Filename>"
msgstr ""
# type: Plain text
#: debconf.conf.5:136
msgid "The file to use as the database. This is a required field."
msgstr ""
# type: TP
#: debconf.conf.5:136 debconf.conf.5:203
#, no-wrap
msgid "B<Mode>"
msgstr ""
# type: Plain text
#: debconf.conf.5:140
msgid ""
"The permissions to create the file with if it does not exist. Defaults to "
"600, since the file could contain passwords in some circumstances."
msgstr ""
# type: TP
#: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310
#, no-wrap
msgid "B<Format>"
msgstr ""
# type: Plain text
#: debconf.conf.5:144 debconf.conf.5:180
msgid ""
"The format of the file. See FORMATS below. Defaults to using a rfc-822 like "
"format."
msgstr ""
# type: Plain text
#: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371
#, no-wrap
msgid "B<Backup>"
msgstr ""
# type: Plain text
#: debconf.conf.5:148 debconf.conf.5:184
msgid ""
"Whether a backup should be made of the old file before changing it. "
"Defaults to true."
msgstr ""
# type: Plain text
#: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209
msgid "As example stanza setting up a database using this driver:"
msgstr ""
# type: Plain text
#: debconf.conf.5:155
#, no-wrap
msgid ""
" Name: mydb\n"
" Driver: File\n"
" Filename: /var/cache/debconf/mydb.dat\n"
msgstr ""
# type: TP
#: debconf.conf.5:156
#, no-wrap
msgid "B<DirTree>"
msgstr ""
# type: Plain text
#: debconf.conf.5:166
msgid ""
"This database driver allows debconf to store data in a hierarchical "
"directory structure. The names of the various debconf templates and "
"questions are used as-is to form directories with files in them. This format "
"for the database is the easiest to browse and fiddle with by hand. It has "
"very good load and save speeds. It also typically occupies the most space, "
"since a lot of small files and subdirectories do take up some additional "
"room."
msgstr ""
# type: TP
#: debconf.conf.5:169
#, no-wrap
msgid "B<Directory>"
msgstr ""
# type: Plain text
#: debconf.conf.5:172
msgid "The directory to put the files in. Required."
msgstr ""
# type: TP
#: debconf.conf.5:172
#, no-wrap
msgid "B<Extension>"
msgstr ""
# type: Plain text
#: debconf.conf.5:176
msgid ""
"An extension to add to the names of files. Must be set to a non-empty "
"string; defaults to \".dat\""
msgstr ""
# type: Plain text
#: debconf.conf.5:192
#, no-wrap
msgid ""
" Name: mydb\n"
" Driver: DirTree\n"
" Directory: /var/cache/debconf/mydb\n"
" Extension: .txt\n"
msgstr ""
# type: TP
#: debconf.conf.5:193
#, no-wrap
msgid "B<PackageDir>"
msgstr ""
# type: Plain text
#: debconf.conf.5:200
msgid ""
"This database driver is a compromise between the File and DirTree databases. "
"It uses a directory, in which there is (approximately) one file per package "
"that uses debconf. This is fairly fast, while using little more room than "
"the File database driver."
msgstr ""
# type: Plain text
#: debconf.conf.5:203
msgid ""
"This driver is configurable in the same ways as is the DirTree driver, plus:"
msgstr ""
# type: Plain text
#: debconf.conf.5:207
msgid ""
"The permissions to create files with. Defaults to 600, since the files could "
"contain passwords in some circumstances."
msgstr ""
# type: Plain text
#: debconf.conf.5:213
#, no-wrap
msgid ""
" Name: mydb\n"
" Driver: PackageDir\n"
" Directory: /var/cache/debconf/mydb\n"
msgstr ""
# type: TP
#: debconf.conf.5:214
#, no-wrap
msgid "B<LDAP>"
msgstr ""
# type: Plain text
#: debconf.conf.5:218
msgid ""
"WARNING: This database driver is currently experimental. Use with caution."
msgstr ""
# type: Plain text
#: debconf.conf.5:226
msgid ""
"This database driver accesses a LDAP directory for debconf configuration "
"data.Due to the nature of the beast, LDAP directories should typically be "
"accessed in read-only mode. This is because multiple accesses can take "
"place, and it's generally better for data consistency if nobody tries to "
"modify the data while this is happening. Of course, write access is "
"supported for those cases where you do want to update the config data in the "
"directory."
msgstr ""
# type: Plain text
#: debconf.conf.5:229
msgid ""
"For information about setting up a LDAP server for debconf, read /usr/share/"
"doc/debconf-doc/README.LDAP (from the debconf-doc package)."
msgstr ""
# type: Plain text
#: debconf.conf.5:232
msgid ""
"To use this database driver, you must have the libnet-ldap-perl package "
"installed. Debconf suggests that package, but does not depend on it."
msgstr ""
# type: Plain text
#: debconf.conf.5:236
msgid ""
"Please carefully consider the security implications of using a remote "
"debconf database. Unless you trust the source, and you trust the intervening "
"network, it is not a very safe thing to do."
msgstr ""
# type: TP
#: debconf.conf.5:239
#, no-wrap
msgid "B<server>"
msgstr ""
# type: Plain text
#: debconf.conf.5:242
msgid "The host name or IP address of an LDAP server to connect to."
msgstr ""
# type: TP
#: debconf.conf.5:242
#, no-wrap
msgid "B<port>"
msgstr ""
# type: Plain text
#: debconf.conf.5:246
msgid ""
"The port on which to connect to the LDAP server. If none is given, the "
"default port is used."
msgstr ""
# type: TP
#: debconf.conf.5:246
#, no-wrap
msgid "B<basedn>"
msgstr ""
# type: Plain text
#: debconf.conf.5:251
msgid ""
"The DN under which all config items will be stored. Each config item will "
"be assumed to live in a DN of cn=E<lt>item nameE<gt>,E<lt>Base DNE<gt>. If "
"this structure is not followed, all bets are off."
msgstr ""
# type: TP
#: debconf.conf.5:251
#, no-wrap
msgid "B<binddn>"
msgstr ""
# type: Plain text
#: debconf.conf.5:255
msgid ""
"The DN to bind to the directory as. Anonymous bind will be used if none is "
"specified."
msgstr ""
# type: TP
#: debconf.conf.5:255
#, no-wrap
msgid "B<bindpasswd>"
msgstr ""
# type: Plain text
#: debconf.conf.5:259
msgid ""
"The password to use in an authenticated bind (used with binddn, above). If "
"not specified, anonymous bind will be used."
msgstr ""
# type: Plain text
#: debconf.conf.5:265
msgid ""
"This option should not be used in the general case. Anonymous binding "
"should be sufficient most of the time for read-only access. Specifying a "
"bind DN and password should be reserved for the occasional case where you "
"wish to update the debconf configuration data."
msgstr ""
# type: TP
#: debconf.conf.5:266
#, no-wrap
msgid "B<keybykey>"
msgstr ""
# type: Plain text
#: debconf.conf.5:272
msgid ""
"Enable access to individual LDAP entries, instead of fetching them all at "
"once in the beginning. This is very useful if you want to monitor your LDAP "
"logs for specific debconf keys requested. In this way, you could also write "
"custom handling code on the LDAP server part."
msgstr ""
# type: Plain text
#: debconf.conf.5:279
msgid ""
"Note that when this option is enabled, the connection to the LDAP server is "
"kept active during the whole Debconf run. This is a little different from "
"the all-in-one behavior where two brief connections are made to LDAP; in the "
"beginning to retrieve all the entries, and in the end to save eventual "
"changes."
msgstr ""
# type: Plain text
#: debconf.conf.5:284
msgid ""
"An example stanza setting up a database using this driver, assuming the "
"remote database is on example.com and can be accessed anonymously:"
msgstr ""
# type: Plain text
#: debconf.conf.5:291
#, no-wrap
msgid ""
" Name: ldapdb\n"
" Driver: LDAP\n"
" Readonly: true\n"
" Server: example.com\n"
" BaseDN: cn=debconf,dc=example,dc=com\n"
" KeyByKey: 0\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:294
msgid ""
"Another example, this time the LDAP database is on localhost, and can be "
"written to:"
msgstr ""
# type: Plain text
#: debconf.conf.5:301
#, no-wrap
msgid ""
" Name: ldapdb\n"
" Driver: LDAP\n"
" Server: localhost\n"
" BaseDN: cn=debconf,dc=domain,dc=com\n"
" BindPasswd: secret\n"
" KeyByKey: 1\n"
msgstr ""
# type: TP
#: debconf.conf.5:302
#, no-wrap
msgid "B<Pipe>"
msgstr ""
# type: Plain text
#: debconf.conf.5:307
msgid ""
"This special-purpose database driver reads and writes the database from "
"standard input/output. It may be useful for people with special needs."
msgstr ""
# type: Plain text
#: debconf.conf.5:314
msgid ""
"The format to read and write. See FORMATS below. Defaults to using a rfc-822 "
"like format."
msgstr ""
# type: TP
#: debconf.conf.5:314
#, no-wrap
msgid "B<Infd>"
msgstr ""
# type: Plain text
#: debconf.conf.5:318
msgid ""
"File descriptor number to read from. Defaults to reading from stdin. If set "
"to \"none\", the database will not read any data on startup."
msgstr ""
# type: TP
#: debconf.conf.5:318
#, no-wrap
msgid "B<Outfd>"
msgstr ""
# type: Plain text
#: debconf.conf.5:322
msgid ""
"File descriptor number to write to. Defaults to writing to stdout. If set to "
"\"none\", the database will be thrown away on shutdown."
msgstr ""
# type: Plain text
#: debconf.conf.5:326
msgid "That's all of the real drivers, now moving on to meta-drivers.."
msgstr ""
# type: TP
#: debconf.conf.5:326 debconf.conf.5:354
#, no-wrap
msgid "B<Stack>"
msgstr ""
# type: Plain text
#: debconf.conf.5:335
msgid ""
"This driver stacks up a number of other databases (of any type), and allows "
"them to be accessed as one. When debconf asks for a value, the first "
"database on the stack that contains the value returns it. If debconf writes "
"something to the database, the write normally goes to the first driver on "
"the stack that has the item debconf is modifying, and if none do, the new "
"item is added to the first writable database on the stack."
msgstr ""
# type: Plain text
#: debconf.conf.5:343
msgid ""
"Things become more interesting if one of the databases on the stack is "
"readonly. Consider a stack of the databases foo, bar, and baz, where foo and "
"baz are both readonly. Debconf wants to change an item, and this item is "
"only present in baz, which is readonly. The stack driver is smart enough to "
"realize that won't work, and it will copy the item from baz to bar, and the "
"write will take place in bar. Now the item in baz is shadowed by the item in "
"bar, and it will not longer be visible to debconf."
msgstr ""
# type: Plain text
#: debconf.conf.5:350
msgid ""
"This kind of thing is particularly useful if you want to point many systems "
"at a central, readonly database, while still allowing things to be "
"overridden on each system. When access controls are added to the picture, "
"stacks allow you to do many other interesting things, like redirect all "
"passwords to one database while a database underneath it handles everything "
"else."
msgstr ""
# type: Plain text
#: debconf.conf.5:352
msgid "Only one piece of configuration is needed to set up a stack:"
msgstr ""
# type: Plain text
#: debconf.conf.5:358
msgid ""
"This is where you specify a list of other databases, by name, to tell it "
"what makes up the stack."
msgstr ""
# type: Plain text
#: debconf.conf.5:361 debconf.conf.5:387
msgid "For example:"
msgstr ""
# type: Plain text
#: debconf.conf.5:365
#, no-wrap
msgid ""
" Name: megadb\n"
" Driver: stack\n"
" Stack: passworddb, configdb, companydb\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:368
msgid ""
"WARNING: The stack driver is not very well tested yet. Use at your own risk."
msgstr ""
# type: Plain text
#: debconf.conf.5:374
msgid ""
"This driver passes all requests on to another database driver. But it also "
"copies all write requests to a backup database driver."
msgstr ""
# type: Plain text
#: debconf.conf.5:376 debconf.conf.5:400
msgid "You must specify the following fields to set up this driver:"
msgstr ""
# type: TP
#: debconf.conf.5:378 debconf.conf.5:402
#, no-wrap
msgid "B<Db>"
msgstr ""
# type: Plain text
#: debconf.conf.5:381 debconf.conf.5:405
msgid "The database to read from and write to."
msgstr ""
# type: TP
#: debconf.conf.5:381
#, no-wrap
msgid "B<Backupdb>"
msgstr ""
# type: Plain text
#: debconf.conf.5:384
msgid "The name of the database to send copies of writes to."
msgstr ""
# type: Plain text
#: debconf.conf.5:392
#, no-wrap
msgid ""
" Name: backup\n"
" Driver: Backup\n"
" Db: mydb\n"
" Backupdb: mybackupdb\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:398
msgid ""
"This driver passes all requests on to another database driver, outputting "
"verbose debugging output about the request and the result."
msgstr ""
# type: SH
#: debconf.conf.5:407
#, no-wrap
msgid "ACCESS CONTROLS"
msgstr ""
# type: Plain text
#: debconf.conf.5:411
msgid ""
"When you set up a database, you can also use some fields to specify access "
"controls. You can specify that a database only accepts passwords, for "
"example, or make a database only accept things with \"foo\" in their name."
msgstr ""
# type: TP
#: debconf.conf.5:411
#, no-wrap
msgid "B<Readonly>"
msgstr ""
# type: Plain text
#: debconf.conf.5:416
msgid ""
"As was mentioned earlier, this access control, if set to \"true\", makes a "
"database readonly. Debconf will read values from it, but will never write "
"anything to it."
msgstr ""
# type: TP
#: debconf.conf.5:416
#, no-wrap
msgid "B<Accept-Name>"
msgstr ""
# type: Plain text
#: debconf.conf.5:422
msgid ""
"The text in this field is a perl-compatible regular expression that is "
"matched against the names of items as they are requested from the database. "
"Only if an items name matches the regular expression, will the database "
"allow debconf to access or modify it."
msgstr ""
# type: TP
#: debconf.conf.5:422
#, no-wrap
msgid "B<Reject-Name>"
msgstr ""
# type: Plain text
#: debconf.conf.5:426
msgid ""
"Like Accept-Name, except any item name matching this regular expression will "
"be rejected."
msgstr ""
# type: TP
#: debconf.conf.5:426
#, no-wrap
msgid "B<Accept-Type>"
msgstr ""
# type: Plain text
#: debconf.conf.5:431
msgid ""
"Another regular expression, this matches against the type of the item that "
"is being accessed. Only if the type matches the regex will access be granted."
msgstr ""
# type: TP
#: debconf.conf.5:431
#, no-wrap
msgid "B<Reject-Type>"
msgstr ""
# type: Plain text
#: debconf.conf.5:435
msgid ""
"Like Accept-Type, except any type matching this regular expression will be "
"rejected."
msgstr ""
# type: SH
#: debconf.conf.5:435
#, no-wrap
msgid "FORMATS"
msgstr ""
# type: Plain text
#: debconf.conf.5:439
msgid ""
"Some of the database drivers use format modules to control the actual format "
"in which the database is stored on disk. These formats are currently "
"supported:"
msgstr ""
# type: TP
#: debconf.conf.5:439
#, no-wrap
msgid "B<822>"
msgstr ""
# type: Plain text
#: debconf.conf.5:444
msgid ""
"This is a file format loosely based upon the rfc-822 format for email "
"message headers. Similar formats are used throughout Debian; in the dpkg "
"status file, and so on."
msgstr ""
# type: Plain text
#: debconf.conf.5:446
msgid "Here is a more complicated example of a debconf.conf file."
msgstr ""
# type: Plain text
#: debconf.conf.5:452
#, no-wrap
msgid ""
" # This stanza is used for general debconf setup.\n"
" Config: stack\n"
" Templates: templates\n"
" Log: developer\n"
" Debug: developer\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:457
#, no-wrap
msgid ""
" # This is my own local database.\n"
" Name: mydb\n"
" Driver: DirTree\n"
" Directory: /var/cache/debconf/config\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:469
#, no-wrap
msgid ""
" # This is another database that I use to hold\n"
" # only X server configuration.\n"
" Name: X\n"
" Driver: File\n"
" Filename: /etc/X11/debconf.dat\n"
" Mode: 644\n"
" # It's sorta hard to work out what questions\n"
" # belong to X; it should be using a deeper\n"
" # tree structure so I could just match on ^X/\n"
" # Oh well.\n"
" Accept-Name: xserver|xfree86|xbase\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:485
#, no-wrap
msgid ""
" # This is our company's global, read-only\n"
" # (for me!) debconf database.\n"
" Name: company\n"
" Driver: LDAP\n"
" Server: debconf.foo.com\n"
" BaseDN: cn=debconf,dc=foo,dc=com\n"
" BindDN: uid=admin,dc=foo,dc=com\n"
" BindPasswd: secret\n"
" Readonly: true\n"
" # I don't want any passwords that might be\n"
" # floating around in there.\n"
" Reject-Type: password\n"
" # If this db is not accessible for whatever\n"
" # reason, carry on anyway.\n"
" Required: false\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:493
#, no-wrap
msgid ""
" # I use this database to hold\n"
" # passwords safe and secure.\n"
" Name: passwords\n"
" Driver: File\n"
" Filename: /etc/debconf/passwords\n"
" Mode: 600\n"
" Accept-Type: password\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:506
#, no-wrap
msgid ""
" # Let's put them all together\n"
" # in a database stack.\n"
" Name: stack\n"
" Driver: Stack\n"
" Stack: passwords, X, mydb, company\n"
" # So, all passwords go to the password database.\n"
" # Most X configuration stuff goes to the X\n"
" # database, and anything else goes to my main\n"
" # database. Values are looked up in each of those\n"
" # in turn, and if none has a particular value, it\n"
" # is looked up in the company-wide LDAP database\n"
" # (unless it's a password).\n"
msgstr ""
# type: Plain text
#: debconf.conf.5:514
#, no-wrap
msgid ""
" # A database is also used to hold templates. We \n"
" # don't need to make this as fancy.\n"
" Name: templates\n"
" Driver: File\n"
" Mode: 644\n"
" Format: 822\n"
" Filename: /var/cache/debconf/templates\n"
msgstr ""
# type: SH
#: debconf.conf.5:514 confmodule.3:22
#, no-wrap
msgid "NOTES"
msgstr ""
# type: Plain text
#: debconf.conf.5:517
msgid ""
"If you use something like ${HOME} in this file, it will be replaced with the "
"value of the named environment variable."
msgstr ""
# type: Plain text
#: debconf.conf.5:521
msgid ""
"Environment variables can also be used to override the databases on the fly, "
"see B<debconf>(7)"
msgstr ""
# type: Plain text
#: debconf.conf.5:524
msgid ""
"The field names (the part of the line before the colon) is case-insensitive. "
"The values, though, are case sensitive."
msgstr ""
# type: SH
#: debconf.conf.5:524
#, no-wrap
msgid "PLANNED ENHANCEMENTS"
msgstr ""
# type: Plain text
#: debconf.conf.5:533
msgid ""
"More drivers and formats. Some ideas include: A SQL driver, with the "
"capability to access a remote database. A DHCP driver, that makes available "
"some special things like hostname, IP address, and DNS servers. A driver "
"that pulls values out of public DNS records TXT fields. A format that is "
"compatible with the output of cdebconf. An override driver, which can "
"override the value field or flags of all requests that pass through it."
msgstr ""
# type: SH
#: debconf.conf.5:533
#, no-wrap
msgid "FILES"
msgstr ""
# type: Plain text
#: debconf.conf.5:535
msgid "/etc/debconf.conf"
msgstr ""
# type: Plain text
#: debconf.conf.5:537
msgid "~/.debconfrc"
msgstr ""
# type: Plain text
#: debconf.conf.5:539
msgid "B<debconf>(7)"
msgstr ""
# type: Plain text
#: debconf.conf.5:540 confmodule.3:43 debconf.7:380 debconf-devel.7:955
msgid "Joey Hess E<lt>joeyh at debian.orgE<gt>"
msgstr ""
# type: TH
#: confmodule.3:1
#, no-wrap
msgid "CONFMODULE"
msgstr ""
# type: Plain text
#: confmodule.3:4
msgid "confmodule - communicate with Debian configuration system FrontEnd."
msgstr ""
# type: Plain text
#: confmodule.3:12
#, no-wrap
msgid ""
" #!/bin/sh -e\n"
" . /usr/share/debconf/confmodule\n"
" db_version 2.0\n"
" db_capb 'backup'\n"
" CAPB=$RET\n"
" db_input 'foo/bar' || true\n"
" db_go || true\n"
msgstr ""
# type: Plain text
#: confmodule.3:22
msgid ""
"This is a library of shell functions that eases communication with Debian's "
"configuration management system. It can communicate with a FrontEnd via the "
"debconf protocol. The design is that each command in the protocol is "
"represented by one function in this module. The functionname is the same as "
"the command, except it is prefixed with \"db_\" and is lower-case. Call the "
"function and pass in any parameters you want to follow the command. Any "
"textual return code from the FrontEnd will be returned to you in the $RET "
"variable, while the numeric return code from the FrontEnd will be returned "
"as a return code (and so those return codes must be captured or ignored)."
msgstr ""
# type: Plain text
#: confmodule.3:29
#, no-wrap
msgid ""
"Once this library is loaded, any text you later output will go to standard\n"
"error, rather than standard output. This is a good thing in general, because\n"
"text sent to standard output is interpreted by the FrontEnd as commands. If\n"
"you do want to send a command directly to the FrontEnd, you must output it\n"
"to file descriptor 3, like this:\n"
" echo GET foo/bar E<gt>&3\n"
msgstr ""
# type: Plain text
#: confmodule.3:36
msgid ""
"The library checks to make sure it is actually speaking to a FrontEnd by "
"examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is "
"assumed to be running. If not, the library turns into one, and runs a copy "
"of the script that loaded the library connected to it. This means that if "
"you source this library, you should do so very near to the top of your "
"script, because everything before the sourcing of the library may well be "
"run again."
msgstr ""
# type: Plain text
#: confmodule.3:42
msgid ""
"B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8), "
"debconf_specification in the debian-policy package"
msgstr ""
"B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8), "
"debconf_specification im Paket debian-policy"
# type: TH
#: debconf.7:1
#, no-wrap
msgid "DEBCONF"
msgstr "DEBCONF"
# type: Plain text
#: debconf.7:4
msgid "debconf - Debian package configuration system"
msgstr "debconf - Debian-Paket-Konfigurationssystem"
# type: Plain text
#: debconf.7:8
msgid ""
"Debconf is a configuration system for Debian packages. There is a rarely-"
"used command named debconf, documented in B<debconf>(1)"
msgstr ""
"Debconf ist ein Konfigurationssystem f?r Debian-Pakete. Es gibt auch einen "
"selten verwandten Befehl namens debconf, der in B<debconf>(1) dokumentiert "
"ist."
# type: Plain text
#: debconf.7:16
msgid ""
"Debconf provides a consistent interface for configuring packages, allowing "
"you to choose from several user interface frontends. It supports "
"preconfiguring packages before they are installed, which allows large "
"installs and upgrades to ask you for all the necessary information up front, "
"and then go do the work while you do something else. It lets you, if you're "
"in a hurry, skip over less important questions and information while "
"installing a package (and revisit it later)."
msgstr ""
"Debconf stellt eine konsistente Schnittstelle zur Paketkonfiguration bereit "
"und erlaubt es Ihnen, aus mehreren Benutzerschnittstellen auszuw?hlen. Es "
"unterst?tzt die Vorkonfiguration von Paketen vor der Installation, womit bei "
"gro?en Installationen und Upgrades alle notwendigen Informationen am Anfang "
"abgefragt werden k?nnen und Sie dann w?hrend der Installation selbst sich "
"anderen Dingen widmen k?nnen. Falls Sie in Eile sind, k?nnen Sie damit "
"w?hrend der Paketinstallation weniger wichtige Fragen und Informationen "
"?berspringen (und diese dann sp?ter nochmal angehen)."
# type: SH
#: debconf.7:16
#, no-wrap
msgid "Preconfiguring packages"
msgstr "Pakete vorkonfigurieren"
# type: Plain text
#: debconf.7:22
msgid ""
"Debconf can configure packages before they are even installed onto your "
"system. This is useful because it lets all the questions the packages are "
"going to ask be asked at the beginning of an install, so the rest of the "
"install can proceed while you are away getting a cup of coffee."
msgstr ""
"Debconf kann sogar Pakete konfigurieren, bevor Sie auf Ihrem System "
"installiert sind. Dies ist n?tzlich, weil damit alle Fragen, die die "
"Pakete stellen werden, am Anfang der Installation gestellt werden k?nnen, "
"so dass der Rest der Installation ablaufen kann, w?hrend Sie eine Tasse "
"Kaffee holen."
# type: Plain text
#: debconf.7:27
msgid ""
"If you use apt (version 0.5 or above), and you have apt-utils installed, "
"each package apt installs will be automatically preconfigured. This is "
"controlled via I</etc/apt/apt.conf.d/70debconf>"
msgstr ""
"Falls Sie Apt (Version 0.6 oder neuer) verwenden und apt-utils ist "
"installiert, wird jedes von Apt installierte Paket automatisch "
"vorkonfiguriert. Dies wird ?ber I</etc/apt/apt.conf.d/70debconf> gesteuert."
# type: Plain text
#: debconf.7:33
msgid ""
"Sometimes you might want to preconfigure a package by hand, when you're not "
"installing it with apt. You can use B<dpkg-preconfigure (8)> to do that, "
"just pass it the filenames of the packages you want to preconfigure. You "
"will need apt-utils installed for that to work."
msgstr ""
# type: SH
#: debconf.7:33
#, no-wrap
msgid "Reconfiguring packages"
msgstr ""
# type: Plain text
#: debconf.7:40
msgid ""
"Suppose you installed the package, and answered debconf's questions, but now "
"that you've used it awhile, you realize you want to go back and change some "
"of your answers. In the past, reinstalling a package was often the thing to "
"do when you got in this situation, but when you reinstall the package, "
"debconf seems to remember you have answered the questions, and doesn't ask "
"them again (this is a feature)."
msgstr ""
# type: Plain text
#: debconf.7:44
#, no-wrap
msgid ""
"Luckily, debconf makes it easy to reconfigure any package that uses it.\n"
"Suppose you want to reconfigure debconf itself. Just run, as root:\n"
" dpkg-reconfigure debconf\n"
msgstr ""
# type: Plain text
#: debconf.7:49
msgid ""
"This will ask all the questions you saw when debconf was first installed. "
"It may ask you other questions as well, since it asks even low priority "
"questions that may have been skipped when the package was installed. You "
"can use it on any other package that uses debconf, as well."
msgstr ""
# type: SH
#: debconf.7:49
#, no-wrap
msgid "Frontends"
msgstr ""
# type: Plain text
#: debconf.7:53
msgid ""
"One of debconf's unique features is that the interface it presents to you is "
"only one of many, that can be swapped in at will. There are many debconf "
"frontends available:"
msgstr ""
# type: TP
#: debconf.7:53
#, no-wrap
msgid "B<dialog>"
msgstr ""
# type: Plain text
#: debconf.7:60
msgid ""
"The default frontend, this uses the B<whiptail (1)> or B<dialog (1)> "
"programs to display questions to you. It works in text mode."
msgstr ""
# type: TP
#: debconf.7:60
#, no-wrap
msgid "B<readline>"
msgstr ""
# type: Plain text
#: debconf.7:71
msgid ""
"The most traditional frontend, this looks quite similar to how Debian "
"configuration always has been: a series of questions, printed out at the "
"console using plain text, and prompts done using the readline library. It "
"even supports tab completion. The libterm-readline-gnu-perl package is "
"strongly recommended if you chose to use this frontend; the default readline "
"module isn't really good enough. At the minimum, you'll need the perl-"
"modules package installed to use this frontend."
msgstr ""
# type: Plain text
#: debconf.7:76
msgid ""
"This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to "
"the previous question (if that is supported by the package that is using "
"debconf), and pagedown (or ctrl-v) will skip forward to the next question."
msgstr ""
# type: Plain text
#: debconf.7:79
msgid ""
"This is the best frontend for remote admin work over a slow connection, or "
"for those who are comfortable with unix."
msgstr ""
# type: TP
#: debconf.7:80
#, no-wrap
msgid "B<noninteractive>"
msgstr ""
# type: Plain text
#: debconf.7:89
msgid ""
"This is the anti-frontend. It never interacts with you at all, and makes the "
"default answers be used for all questions. It might mail error messages to "
"root, but that's it; otherwise it is completely silent and unobtrusive, a "
"perfect frontend for automatic installs. If you are using this front-end, "
"and require non-default answers to questions, you will need to preseed the "
"debconf database; see the section below on Unattended Package Installation "
"for more details."
msgstr ""
# type: TP
#: debconf.7:89
#, no-wrap
msgid "B<gnome>"
msgstr ""
# type: Plain text
#: debconf.7:95
msgid ""
"This is a modern X GUI using the gtk and gnome libraries. Of course, it "
"requires a valid DISPLAY to work; debconf will fall back to other frontends "
"if it can't work. Note that this frontend requires you have the libgnome2-"
"perl package installed."
msgstr ""
# type: TP
#: debconf.7:95
#, no-wrap
msgid "B<kde>"
msgstr ""
# type: Plain text
#: debconf.7:101
msgid ""
"This frontend provides a simple X GUI written with the Qt library. It fits "
"well the KDE desktop. You of course need a DISPLAY to use this frontend and "
"must install libqt-perl. The frontend will fall back to dialog if some of "
"the prerequisites are not met."
msgstr ""
# type: TP
#: debconf.7:101
#, no-wrap
msgid "B<editor>"
msgstr ""
# type: Plain text
#: debconf.7:109
msgid ""
"This is for those fanatics who have to do everything in a text editor. It "
"runs your editor on a file that looks something like a typical unix config "
"file, and you edit the file to communicate with debconf. Debconf's author "
"prefers to not comment regarding the circumstances that led to this frontend "
"being written."
msgstr ""
# type: TP
#: debconf.7:109
#, no-wrap
msgid "B<web>"
msgstr ""
# type: Plain text
#: debconf.7:119
msgid ""
"This frontend acts as a web server, that you connect to with your web "
"browser, to browse the questions and answer them. It has a lot of promise, "
"but is a little rough so far. When this frontend starts up, it will print "
"out the location you should point your web browser to. You have to run the "
"web browser on the same machine you are configuring, for security reasons."
msgstr ""
# type: Plain text
#: debconf.7:125
msgid ""
"Do keep in mind that this is not a very secure frontend. Anyone who has "
"access to the computer being configured can currently access the web server "
"and configure things while this frontend is running. So this is more of a "
"proof of concept than anything."
msgstr ""
# type: Plain text
#: debconf.7:132
#, no-wrap
msgid ""
"You can change the default frontend debconf uses by reconfiguring\n"
"debconf. On the other hand, if you just want to change the frontend\n"
"for a minute, you can set the DEBIAN_FRONTEND environment variable to\n"
"the name of the frontend to use. For example:\n"
" DEBIAN_FRONTEND=readline apt-get install slrn\n"
msgstr ""
# type: Plain text
#: debconf.7:140
msgid ""
"The B<dpkg-reconfigure (8)> and B<dpkg-preconfigure (8)> commands also let "
"you pass I<--frontend=> to them, followed by the frontend you want them to "
"use."
msgstr ""
# type: Plain text
#: debconf.7:144
msgid ""
"Note that not all frontends will work in all circumstances. If a frontend "
"fails to start up for some reason, debconf will print out a message "
"explaining why, and fall back to the next-most similar frontend."
msgstr ""
# type: SH
#: debconf.7:144
#, no-wrap
msgid "Priorities"
msgstr ""
# type: Plain text
#: debconf.7:151
msgid ""
"Another nice feature of debconf is that the questions it asks you are "
"prioritized. If you don't want to be bothered about every little thing, you "
"can set up debconf to only ask you the most important questions. On the "
"other hand, if you are a control freak, you can make it show you all "
"questions. Each question has a priority. In increasing order of importance:"
msgstr ""
# type: TP
#: debconf.7:151 debconf-devel.7:290
#, no-wrap
msgid "B<low>"
msgstr ""
# type: Plain text
#: debconf.7:155
msgid ""
"Very trivial questions that have defaults that will work in the vast "
"majority of cases."
msgstr ""
# type: TP
#: debconf.7:155 debconf-devel.7:294
#, no-wrap
msgid "B<medium>"
msgstr ""
# type: Plain text
#: debconf.7:158
msgid "Normal questions that have reasonable defaults."
msgstr ""
# type: TP
#: debconf.7:158 debconf-devel.7:297
#, no-wrap
msgid "B<high>"
msgstr ""
# type: Plain text
#: debconf.7:161
msgid "Questions that don't have a reasonable default."
msgstr ""
# type: TP
#: debconf.7:161 debconf-devel.7:300
#, no-wrap
msgid "B<critical>"
msgstr ""
# type: Plain text
#: debconf.7:164
msgid "Questions that you really, really need to see (or else)."
msgstr ""
# type: Plain text
#: debconf.7:174
msgid ""
"Only questions with a priority equal to or greater than the priority you "
"choose will be shown to you. You can set the priority value by reconfiguring "
"debconf, or temporarily by passing I<--priority=> followed by the value to "
"the B<dpkg-reconfigure (8)> and B<dpkg-preconfigure (8)> commands, or by "
"setting the DEBIAN_PRIORITY environment variable."
msgstr ""
# type: SH
#: debconf.7:174
#, no-wrap
msgid "Backend Database"
msgstr ""
# type: Plain text
#: debconf.7:185
msgid ""
"Debconf uses a rather flexible and potentially complicated backend database "
"for storing data such as the answers to questions. The file B</etc/debconf."
"conf> is used to configure this database. If you need to set up something "
"complicated, like make debconf read a remote database to get defaults, with "
"local overrides, read the B<debconf.conf (5)> man page for all the gory "
"details. Generally, the backend database is located in B</var/cache/debconf/>"
msgstr ""
# type: SH
#: debconf.7:185
#, no-wrap
msgid "Unattended Package Installation"
msgstr ""
# type: Plain text
#: debconf.7:192
msgid ""
"If you have many machines to manage you will sometimes find yourself in the "
"position of needing to perform an unattended installation or upgrade of "
"packages on many systems, when the default answers to some configuration "
"questions are not acceptable. There are many ways to approach this; all "
"involve setting up a database and making debconf use it to get the answers "
"you want."
msgstr ""
# type: Plain text
#: debconf.7:196
msgid ""
"You should really read B<debconf.conf (5)> before this section, as you need "
"to understand how debconf's databases work."
msgstr ""
# type: Plain text
#: debconf.7:203
msgid ""
"The easiest way to set up the database is to install the packages on one "
"machine and answer their questions as usual. Or you might just use B<dpkg-"
"preconfigure>(8) to configure a set of packages without actually installing "
"them. Or you might even decide to write a plain text debconf database by "
"hand or something."
msgstr ""
# type: Plain text
#: debconf.7:207
msgid ""
"Once you have the database, you need to figure out how to make the remote "
"systems use it. This depends of course on the configuration of those systems "
"and what database types they are set up to use."
msgstr ""
# type: Plain text
#: debconf.7:211
msgid ""
"If you are using the LDAP debconf database, an entire network of debian "
"machines can also have any or all package installation questions answered "
"automatically by a single LDAP server."
msgstr ""
# type: Plain text
#: debconf.7:220
msgid ""
"But perhaps you're using something a little bit easier to set up like, say, "
"the default debconf database configuration, or you just don't want your "
"remote systems to use LDAP all the time. In this case the best approach is "
"to temporarily configure the remote systems to stack your database "
"underneath their own existing databases, so they pull default values out of "
"it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and "
"DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample "
"use:"
msgstr ""
# type: Plain text
#: debconf.7:224
#, no-wrap
msgid ""
" cat /var/cache/debconf/config.dat | \\e\n"
" ssh root at target \"DEBIAN_FRONTEND=noninteractive \\e\n"
" DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n"
msgstr ""
# type: Plain text
#: debconf.7:230
msgid ""
"This makes the debconf on the remote host read in the data that is piped "
"across the ssh connection and interpret it as a plain text format debconf "
"database. It then uses that database as a fallback database -- a read-only "
"database that is queried for answers to questions if the system's main "
"debconf database lacks answers."
msgstr ""
# type: Plain text
#: debconf.7:232
msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:"
msgstr ""
# type: Plain text
#: debconf.7:235
#, no-wrap
msgid ""
" ssh -R 389:ldap:389 root at target \\e\n"
" \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n"
msgstr ""
# type: Plain text
#: debconf.7:240
msgid ""
"Here ssh is used to set up a tunneled LDAP connection and run debconf. "
"Debconf is told to use the LDAP server as the fallback database. Note the "
"use of \"{host:localhost}\" to configure how debconf accesses the LDAP "
"database by providing the \"host\" field with a value of \"localhost\"."
msgstr ""
# type: Plain text
#: debconf.7:242
msgid "Here's another method:"
msgstr ""
# type: Plain text
#: debconf.7:245
#, no-wrap
msgid ""
" scp config.dat root at target:\n"
" ssh root at target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n"
msgstr ""
# type: Plain text
#: debconf.7:250
msgid ""
"Here you copy the database over with scp, and then ssh over and make debconf "
"use the file you copied over. This illustrates a shorthand you can use in "
"the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it "
"defaults to \"filename\"."
msgstr ""
# type: Plain text
#: debconf.7:259
msgid ""
"There is only one problem with these uses of the DEBCONF_DB_FALLBACK "
"parameter: While the fallback database can provide answers to questions the "
"other debconf databases have never seen, it is only queried as a fallback; "
"after the other databases. If you need to instead temporarily override an "
"existing value on the remote host, you should instead use the "
"DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a "
"temporary database, but this database is consulted before any others, and "
"can be used to override existing values."
msgstr ""
# type: SH
#: debconf.7:259
#, no-wrap
msgid "Developing for Debconf"
msgstr ""
# type: Plain text
#: debconf.7:263
msgid ""
"Package developers and others who want to develop packages that use debconf "
"should read B<debconf-devel>(7)B<.>"
msgstr ""
# type: Plain text
#: debconf.7:271
msgid ""
"Briefly, debconf communicates with maintainer scripts or other programs via "
"standard input and output, using a simple line-oriented command language "
"similar to that used by common internet protocols such as SMTP. Programs use "
"this protocol to ask debconf to display questions to the user, and retrieve "
"the user's answers. The questions themselves are defined in a separate file, "
"called the \"templates file\", which has a format not unlike a debian "
"control file."
msgstr ""
# type: Plain text
#: debconf.7:275
msgid ""
"Debian packages which use debconf typically provide both a templates file "
"and a \"config\" script (run to preconfigure the package) in the control "
"metadata section of the package."
msgstr ""
# type: SH
#: debconf.7:275
#, no-wrap
msgid "ENVIRONMENT"
msgstr ""
# type: TP
#: debconf.7:276
#, no-wrap
msgid "B<DEBIAN_FRONTEND>"
msgstr ""
# type: Plain text
#: debconf.7:279
msgid "Used to temporarily change the frontend debconf uses. See above."
msgstr ""
# type: TP
#: debconf.7:279
#, no-wrap
msgid "B<DEBIAN_PRIORITY>"
msgstr ""
# type: Plain text
#: debconf.7:283
msgid ""
"Used to temporarily change the minimum priority of question debconf will "
"display. See above."
msgstr ""
# type: TP
#: debconf.7:283 debconf-devel.7:569
#, no-wrap
msgid "B<DEBCONF_DEBUG>"
msgstr ""
# type: Plain text
#: debconf.7:289
msgid ""
"Turns on debugging output on standard error. May be set to a facility name "
"or a regular expression which matches a facility name (such as '.*' to "
"output all debug info). The facility names include:"
msgstr ""
# type: TP
#: debconf.7:289
#, no-wrap
msgid "B<user>"
msgstr ""
# type: Plain text
#: debconf.7:292
msgid "Debugging info of interest to a debconf user."
msgstr ""
# type: TP
#: debconf.7:292
#, no-wrap
msgid "B<developer>"
msgstr ""
# type: Plain text
#: debconf.7:295
msgid "Debugging info of interest to a package developer."
msgstr ""
# type: TP
#: debconf.7:295
#, no-wrap
msgid "B<db>"
msgstr ""
# type: Plain text
#: debconf.7:298
msgid "Debugging info about the backend database."
msgstr ""
# type: TP
#: debconf.7:299
#, no-wrap
msgid "B<DEBCONF_NOWARNINGS>"
msgstr ""
# type: Plain text
#: debconf.7:303
msgid ""
"Set to \"yes\" to disable some warnings that debconf may display. Does not "
"suppress display of fatal errors."
msgstr ""
# type: TP
#: debconf.7:303
#, no-wrap
msgid "B<DEBCONF_TERSE>"
msgstr ""
# type: Plain text
#: debconf.7:307
msgid ""
"Set to \"yes\" to enable terse mode, in which debconf frontends cut down on "
"the verbiage as much as possible."
msgstr ""
# type: TP
#: debconf.7:307
#, no-wrap
msgid "B<DEBCONF_DB_FALLBACK>"
msgstr ""
# type: Plain text
#: debconf.7:317
msgid ""
"Stack a database after the normally used databases, so that it is used as a "
"fallback to get configuration information from. See \"Unattended Package "
"Installation\" above. If the value of the variable is the name of an "
"existing database in debconf.conf, then that database will be used. "
"Otherwise, the environment variable can be used to configure a database on "
"the fly, by telling the type of database, and optionally passing field:value "
"settings, inside curly braces after the type. Spaces are used to separate "
"fields, so you cannot specify a field value containing whitespace."
msgstr ""
# type: Plain text
#: debconf.7:320
#, no-wrap
msgid ""
"Thus, this uses the fallbackdb in debconf.conf:\n"
" DEBCONF_DB_FALLBACK=fallbackdb\n"
msgstr ""
# type: Plain text
#: debconf.7:324
#, no-wrap
msgid ""
"While this sets up a new database of type File, and tells it a filename to\n"
"use and turns off backups:\n"
" DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n"
msgstr ""
# type: Plain text
#: debconf.7:327
#, no-wrap
msgid ""
"And as a shorthand, this sets up a database of type File with a filename:\n"
" DEBCONF_DB_FALLBACK=File{/root/config.dat}\n"
msgstr ""
# type: Plain text
#: debconf.7:330
msgid ""
"Note that if a fallback database is set up on the fly, it will be read-only "
"by default."
msgstr ""
# type: TP
#: debconf.7:330
#, no-wrap
msgid "B<DEBCONF_DB_OVERRIDE>"
msgstr ""
# type: Plain text
#: debconf.7:335
msgid ""
"Stack a database before the normally used databases, so that it can override "
"values from them. The value of the variable works the same as does the value "
"of DEBCONF_DB_FALLBACK."
msgstr ""
# type: TP
#: debconf.7:335
#, no-wrap
msgid "B<DEBCONF_DB_REPLACE>"
msgstr ""
# type: Plain text
#: debconf.7:340
msgid ""
"Use a given database instead of the normally used databases. This may be "
"useful for testing with a separate database without having to create a "
"separate debconf.conf, or to avoid locking the normal databases."
msgstr ""
# type: TP
#: debconf.7:340
#, no-wrap
msgid "B<DEBCONF_SYSTEMRC>"
msgstr ""
# type: Plain text
#: debconf.7:346
msgid ""
"If this environment variable is set, debconf will ignore a user's ~/."
"debconfrc file, and use the system one instead. If it is set to the name of "
"a regular file, debconf will use that file in preference to the system "
"configuration files."
msgstr ""
# type: TP
#: debconf.7:346
#, no-wrap
msgid "B<DEBCONF_FORCE_DIALOG>"
msgstr ""
# type: Plain text
#: debconf.7:350
msgid ""
"If this environment variable is set, debconf will use dialog in preference "
"to whiptail for the dialog frontend."
msgstr ""
# type: TP
#: debconf.7:350
#, no-wrap
msgid "B<DEBCONF_FORCE_XDIALOG>"
msgstr ""
# type: Plain text
#: debconf.7:354
msgid ""
"If this environment variable is set, debconf will use Xdialog in preference "
"to whiptail for the dialog frontend."
msgstr ""
# type: TP
#: debconf.7:354
#, no-wrap
msgid "B<DEBCONF_NONINTERACTIVE_SEEN>"
msgstr ""
# type: Plain text
#: debconf.7:358
msgid ""
"Set to \"true\" to cause the seen flag to be set for questions asked in the "
"noninteractive frontend."
msgstr ""
# type: SH
#: debconf.7:358
#, no-wrap
msgid "BUGS"
msgstr ""
# type: Plain text
#: debconf.7:360
msgid "Probably quite a few, there's a lot of code here."
msgstr ""
# type: Plain text
#: debconf.7:362
msgid ""
"If you do file a bug report, be sure to include the following information:"
msgstr ""
# type: TP
#: debconf.7:362 debconf.7:365 debconf.7:368 debconf-devel.7:464
#: debconf-devel.7:468 debconf-devel.7:474 debconf-devel.7:479
#: debconf-devel.7:484
#, no-wrap
msgid "B<*>"
msgstr ""
# type: Plain text
#: debconf.7:365
msgid "The debconf frontend you were using when the problem occurred"
msgstr ""
# type: Plain text
#: debconf.7:368
msgid "What you did to trigger the problem."
msgstr ""
# type: Plain text
#: debconf.7:373
msgid ""
"The full text of any error messages. If you can reproduce the bug, do so "
"with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot."
msgstr ""
# type: Plain text
#: debconf.7:379
msgid ""
"B<debconf.conf>(5), B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-"
"reconfigure>(8), B<debconf>(1),"
msgstr ""
# type: TH
#: debconf-devel.7:1
#, no-wrap
msgid "DEBCONF-DEVEL"
msgstr ""
# type: Plain text
#: debconf-devel.7:4
msgid "debconf - developers guide"
msgstr ""
# type: Plain text
#: debconf-devel.7:6
msgid "This is a guide for developing packages that use debconf."
msgstr ""
# type: Plain text
#: debconf-devel.7:9
msgid ""
"This manual assumes that you are familiar with debconf as a user, and are "
"familiar with the basics of debian package construction."
msgstr ""
# type: Plain text
#: debconf-devel.7:18
msgid ""
"This manual begins by explaining two new files that are added to debian "
"packages that use debconf. Then it explains how the debconf protocol works, "
"and points you at some libraries that will let your programs speak the "
"protocol. It discusses other maintainer scripts that debconf is typically "
"used in: the postinst and postrm scripts. Then moves on to more advanced "
"topics like shared debconf templates, debugging, and some common techniques "
"and pitfalls of programming with debconf. It closes with a discussion of "
"debconf's current shortcomings."
msgstr ""
# type: SH
#: debconf-devel.7:18
#, no-wrap
msgid "THE CONFIG SCRIPT"
msgstr ""
# type: Plain text
#: debconf-devel.7:23
msgid ""
"Debconf adds an additional maintainer script, the config script, to the set "
"of maintainer scripts that can be in debian packages (the postinst, preinst, "
"postrm, and prerm). The config script is responsible for asking any "
"questions necessary to configure the package."
msgstr ""
# type: Plain text
#: debconf-devel.7:28
msgid ""
"Note: It is a little confusing that dpkg refers to running a package's "
"postinst script as \"configuring\" the package, since a package that uses "
"debconf is often fully pre-configured, by its config script, before the "
"postinst ever runs. Oh well."
msgstr ""
# type: Plain text
#: debconf-devel.7:34
msgid ""
"Like the postinst, the config script is passed two parameters when it is "
"run. The first tells what action is being performed, and the second is the "
"version of the package that is currently installed. So, like in a postinst, "
"you can use dpkg --compare-versions on $2 to make some behavior happen only "
"on upgrade from a particular version of a package, and things like that."
msgstr ""
# type: Plain text
#: debconf-devel.7:36
msgid "The config script can be run in one of three ways:"
msgstr ""
# type: TP
#: debconf-devel.7:36
#, no-wrap
msgid "B<1>"
msgstr ""
# type: Plain text
#: debconf-devel.7:40
msgid ""
"If a package is pre-configured, with dpkg-preconfigure, its config script is "
"run, and is passed the parameters \"configure\", and installed-version."
msgstr ""
# type: TP
#: debconf-devel.7:40
#, no-wrap
msgid "B<2>"
msgstr ""
# type: Plain text
#: debconf-devel.7:47
msgid ""
"When a package's postinst is run, debconf will try to run the config script "
"then too, and it will be passed the same parameters it was passed when it is "
"pre-configured. This is necessary because the package might not have been "
"pre-configured, and the config script still needs to get a chance to run. "
"See HACKS for details."
msgstr ""
# type: TP
#: debconf-devel.7:47
#, no-wrap
msgid "B<3>"
msgstr ""
# type: Plain text
#: debconf-devel.7:52
msgid ""
"If a package is reconfigured, with dpkg-reconfigure, its config script it "
"run, and is passed the parameters \"reconfigure\" and installed-version."
msgstr ""
# type: Plain text
#: debconf-devel.7:58
msgid ""
"Note that since a typical package install or upgrade using apt runs steps 1 "
"and 2, the config script will typically be run twice. It should do nothing "
"the second time (to ask questions twice in a row is annoying), and it should "
"definitely be idempotent. Luckily, debconf avoids repeating questions by "
"default, so this is generally easy to accomplish."
msgstr ""
# type: Plain text
#: debconf-devel.7:64
msgid ""
"Note that the config script is run before the package is unpacked. It should "
"only use commands that are in essential packages. The only dependency of "
"your package that is guaranteed to be met when its config script is run is a "
"dependency (possibly versioned) on debconf itself."
msgstr ""
# type: Plain text
#: debconf-devel.7:70
msgid ""
"The config script should not need to modify the filesystem at all. It just "
"examines the state of the system, and asks questions, and debconf stores the "
"answers to be acted on later by the postinst script. Conversely, the "
"postinst script should almost never use debconf to ask questions, but should "
"instead act on the answers to questions asked by the config script."
msgstr ""
# type: SH
#: debconf-devel.7:70
#, no-wrap
msgid "THE TEMPLATES FILE"
msgstr ""
# type: Plain text
#: debconf-devel.7:73
msgid ""
"A package that uses debconf probably wants to ask some questions. These "
"questions are stored, in template form, in the templates file."
msgstr ""
# type: Plain text
#: debconf-devel.7:78
msgid ""
"Like the config script, the templates file is put in the control.tar.gz "
"section of a deb. Its format is similar to a debian control file; a set of "
"stanzas separated by blank lines, with each stanza having a RFC822-like form:"
msgstr ""
# type: Plain text
#: debconf-devel.7:94
#, no-wrap
msgid ""
" Template: foo/bar\n"
" Type: string\n"
" Default: foo\n"
" Description: This is a sample string question.\n"
" This is its extended description.\n"
" .\n"
" Notice that:\n"
" - Like in a debian package description, a dot\n"
" on its own line sets off a new paragraph.\n"
" - Most text is word-wrapped, but doubly-indented\n"
" text is left alone, so you can use it for lists\n"
" of items, like this list. Be careful, since\n"
" it is not word-wrapped, if it's too wide\n"
" it will look bad. Using it for short items\n"
" is best (so this is a bad example).\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:99
#, no-wrap
msgid ""
" Template: foo/baz\n"
" Type: boolean\n"
" Description: Clear enough, no?\n"
" This is another question, of boolean type.\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:103
msgid ""
"For some real-life examples of templates files, see /var/lib/dpkg/info/"
"debconf.templates, and other .templates files in that directory."
msgstr ""
# type: Plain text
#: debconf-devel.7:105
msgid "Let's look at each of the fields in turn.."
msgstr ""
# type: TP
#: debconf-devel.7:105
#, no-wrap
msgid "B<Template>"
msgstr ""
# type: Plain text
#: debconf-devel.7:111
msgid ""
"The name of the template, in the 'Template' field, is generally prefixed "
"with the name of the package. After that the namespace is wide open; you can "
"use a simple flat layout like the one above, or set up \"subdirectories\" "
"containing related questions."
msgstr ""
# type: TP
#: debconf-devel.7:111
#, no-wrap
msgid "B<Type>"
msgstr ""
# type: Plain text
#: debconf-devel.7:115
msgid ""
"The type of the template determines what kind of widget is displayed to the "
"user. The currently supported types are:"
msgstr ""
# type: TP
#: debconf-devel.7:116
#, no-wrap
msgid "B<string>"
msgstr ""
# type: Plain text
#: debconf-devel.7:119
msgid ""
"Results in a free-form input field that the user can type any string into."
msgstr ""
# type: TP
#: debconf-devel.7:119
#, no-wrap
msgid "B<password>"
msgstr ""
# type: Plain text
#: debconf-devel.7:124
msgid ""
"Prompts the user for a password. Use this with caution; be aware that the "
"password the user enters will be written to debconf's database. You should "
"probably clean that value out of the database as soon as is possible."
msgstr ""
# type: TP
#: debconf-devel.7:124
#, no-wrap
msgid "B<boolean>"
msgstr ""
# type: Plain text
#: debconf-devel.7:127
msgid "A true/false choice."
msgstr ""
# type: TP
#: debconf-devel.7:127
#, no-wrap
msgid "B<select>"
msgstr ""
# type: Plain text
#: debconf-devel.7:132
msgid ""
"A choice between one of a number of values. The choices must be specified in "
"a field named 'Choices'. Separate the possible values with commas and "
"spaces, like this:"
msgstr ""
# type: Plain text
#: debconf-devel.7:134
#, no-wrap
msgid " Choices: yes, no, maybe\n"
msgstr ""
# type: TP
#: debconf-devel.7:135
#, no-wrap
msgid "B<multiselect>"
msgstr ""
# type: Plain text
#: debconf-devel.7:139
msgid ""
"Like the select data type, except the user can choose any number of items "
"from the choices list (or choose none of them)."
msgstr ""
# type: TP
#: debconf-devel.7:139
#, no-wrap
msgid "B<note>"
msgstr ""
# type: Plain text
#: debconf-devel.7:147
msgid ""
"Rather than being a question per se, this datatype indicates a note that can "
"be displayed to the user. It should be used only for important notes that "
"the user really should see, since debconf will go to great pains to make "
"sure the user sees it; halting the install for them to press a key. It's "
"best to use these only for warning about very serious problems, and the "
"error datatype is often more suitable."
msgstr ""
# type: TP
#: debconf-devel.7:147
#, no-wrap
msgid "B<error>"
msgstr ""
# type: Plain text
#: debconf-devel.7:152
msgid ""
"This datatype is used for error messages, such as input validation errors. "
"Debconf will show a question of this type even if the priority is too high "
"or the user has already seen it."
msgstr ""
# type: TP
#: debconf-devel.7:152
#, no-wrap
msgid "B<title>"
msgstr ""
# type: Plain text
#: debconf-devel.7:155
msgid "This datatype is used for titles, to be set with the SETTITLE command."
msgstr ""
# type: TP
#: debconf-devel.7:155
#, no-wrap
msgid "B<text>"
msgstr ""
# type: Plain text
#: debconf-devel.7:162
msgid ""
"This datatype can be used for fragments of text, such as labels, that can be "
"used for cosmetic reasons in the displays of some frontends. Other frontends "
"will not use it at all. There is no point in using this datatype yet, since "
"no frontends support it well. It may even be removed in the future."
msgstr ""
# type: TP
#: debconf-devel.7:163
#, no-wrap
msgid "B<Default>"
msgstr ""
# type: Plain text
#: debconf-devel.7:171
msgid ""
"The 'Default' field tells debconf what the default value should be. For "
"multiselect, it can be a list of choices, separated by commas and spaces, "
"similar to the 'Choices' field. For select, it should be one of the choices. "
"For boolean, it is \"true\" or \"false\", while it can be anything for a "
"string, and it is ignored for passwords."
msgstr ""
# type: Plain text
#: debconf-devel.7:178
msgid ""
"Don't make the mistake of thinking that the default field contains the "
"\"value\" of the question, or that it can be used to change the value of the "
"question. It does not, and cannot, it just provides a default value for the "
"first time the question is displayed. To provide a default that changes on "
"the fly, you'd have to use the SET command to change the value of a question."
msgstr ""
# type: TP
#: debconf-devel.7:179
#, no-wrap
msgid "B<Description>"
msgstr ""
# type: Plain text
#: debconf-devel.7:187
msgid ""
"The 'Description' field, like the description of a Debian package, has two "
"parts: A short description and an extended description. Note that some "
"debconf frontends don't display the long description, or might only display "
"it if the user asks for help. So the short description should be able to "
"stand on its own."
msgstr ""
# type: Plain text
#: debconf-devel.7:193
msgid ""
"If you can't think up a long description, then first, think some more. Post "
"to debian-devel. Ask for help. Take a writing class! That extended "
"description is important. If after all that you still can't come up with "
"anything, leave it blank. There is no point in duplicating the short "
"description."
msgstr ""
# type: Plain text
#: debconf-devel.7:198
msgid ""
"Text in the extended description will be word-wrapped, unless it is prefixed "
"by additional whitespace (beyond the one required space). You can break it "
"up into separate paragraphs by putting \" .\" on a line by itself between "
"them."
msgstr ""
# type: SH
#: debconf-devel.7:199
#, no-wrap
msgid "QUESTIONS"
msgstr "FRAGEN"
# type: Plain text
#: debconf-devel.7:211
msgid ""
"A question is an instantiated template. By asking debconf to display a "
"question, your config script can interact with the user. When debconf loads "
"a templates file (this happens whenever a config or postinst script is run), "
"it automatically instantiates a question from each template. It is actually "
"possible to instantiate several independent questions from the same template "
"(using the REGISTER command), but that is rarely necessary. Templates are "
"static data that comes from the templates file, while questions are used to "
"store dynamic data, like the current value of the question, whether a user "
"has seen a question, and so on. Keep the distinction between a template and "
"a question in mind, but don't worry too much about it."
msgstr ""
# type: SH
#: debconf-devel.7:211
#, no-wrap
msgid "SHARED TEMPLATES"
msgstr ""
# type: Plain text
#: debconf-devel.7:218
msgid ""
"It's actually possible to have a template and a question that are shared "
"among a set of packages. All the packages have to provide an identical copy "
"of the template in their templates files. This can be useful if a bunch of "
"packages need to ask the same question, and you only want to bother the user "
"with it once. Shared templates are generally put in the shared/ pseudo-"
"directory in the debconf template namespace."
msgstr ""
# type: SH
#: debconf-devel.7:218
#, no-wrap
msgid "THE DEBCONF PROTOCOL"
msgstr "DAS DEBCONF-PROTOKOLL"
# type: Plain text
#: debconf-devel.7:224
msgid ""
"Config scripts communicate with debconf using the debconf protocol. This is "
"a simple line-oriented protocol, similar to common internet protocols such "
"as SMTP. The config script sends debconf a command by writing the command to "
"standard output. Then it can read debconf's reply from standard input."
msgstr ""
# type: Plain text
#: debconf-devel.7:230
msgid ""
"Debconf's reply can be broken down into two parts: A numeric result code "
"(the first word of the reply), and an optional extended result code (the "
"remainder of the reply). The numeric code uses 0 to indicate success, and "
"other numbers to indicate various kinds of failure. For full details, see "
"the table in Debian policy's debconf specification document."
msgstr ""
# type: Plain text
#: debconf-devel.7:235
msgid ""
"The extended return code is generally free form and unspecified, so you "
"should generally ignore it, and should certainly not try to parse it in a "
"program to work out what debconf is doing. The exception is commands like "
"GET, that cause a value to be returned in the extended return code."
msgstr ""
# type: Plain text
#: debconf-devel.7:239
msgid ""
"Generally you'll want to use a language-specific library that handles the "
"nuts and bolts of setting up these connections to debconf and communicating "
"with it."
msgstr ""
# type: Plain text
#: debconf-devel.7:242
msgid ""
"For now, here are the commands in the protocol. This is not the definitive "
"definition, see Debian policy's debconf specification document for that."
msgstr ""
# type: TP
#: debconf-devel.7:242
#, no-wrap
msgid "B<VERSION number>"
msgstr ""
# type: Plain text
#: debconf-devel.7:250
msgid ""
"You generally don't need to use this command. It exchanges with debconf the "
"protocol version number that is being used. The current protocol version is "
"2.0, and versions in the 2.x series will be backwards-compatible. You may "
"specify the protocol version number you are speaking and debconf will return "
"the version of the protocol it speaks in the extended result code. If the "
"version you specify is too low, debconf will reply with numeric code 30."
msgstr ""
# type: TP
#: debconf-devel.7:250
#, no-wrap
msgid "B<CAPB capabilities>"
msgstr ""
# type: Plain text
#: debconf-devel.7:257
msgid ""
"You generally don't need to use this command. It exchanges with debconf a "
"list of supported capabilities. Capabilities that both you and debconf "
"support will be used, and debconf will reply with all the capabilities it "
"supports."
msgstr ""
# type: Plain text
#: debconf-devel.7:267
msgid ""
"If 'escape' is found among your capabilities, debconf will expect commands "
"you send it to have backslashes and newlines escaped (as \\e\\e and \\en "
"respectively) and will in turn escape backslashes and newlines in its "
"replies. This can be used, for example, to substitute multi-line strings "
"into templates, or to get multi-line extended descriptions reliably using "
"METAGET. In this mode, you must escape input text yourself (you can use "
"B<debconf-escape>(1) to help with this if you want), but the confmodule "
"libraries will unescape replies for you."
msgstr ""
# type: TP
#: debconf-devel.7:268
#, no-wrap
msgid "B<TITLE string>"
msgstr ""
# type: Plain text
#: debconf-devel.7:273
msgid ""
"This sets the title debconf displays to the user. You rarely need to use "
"this command since debconf can automatically generate a title based on your "
"package's name."
msgstr ""
# type: TP
#: debconf-devel.7:273
#, no-wrap
msgid "B<SETTITLE question>"
msgstr ""
# type: Plain text
#: debconf-devel.7:280
msgid ""
"This sets the title to the short description of the template for the "
"specified question. The template should be of type title. The advantage this "
"has over the TITLE command is that it allows for titles to be stored in the "
"same place as the rest of the debconf questions, and allows them to be "
"translated."
msgstr ""
# type: TP
#: debconf-devel.7:280
#, no-wrap
msgid "B<INPUT priority question>"
msgstr ""
# type: Plain text
#: debconf-devel.7:287
msgid ""
"Ask debconf to prepare to display a question to the user. The question is "
"not actually displayed until a GO command is issued; this lets several INPUT "
"commands be given in series, to build up a set of questions, which might all "
"be asked on a single screen."
msgstr ""
# type: Plain text
#: debconf-devel.7:290
msgid ""
"The priority field tells debconf how important it is that this question be "
"shown to the user. The priority values are:"
msgstr ""
# type: Plain text
#: debconf-devel.7:294
msgid ""
"Very trivial items that have defaults that will work in the vast majority of "
"cases; only control freaks see these."
msgstr ""
# type: Plain text
#: debconf-devel.7:297
msgid "Normal items that have reasonable defaults."
msgstr ""
# type: Plain text
#: debconf-devel.7:300
msgid "Items that don't have a reasonable default."
msgstr ""
# type: Plain text
#: debconf-devel.7:303
msgid "Items that will probably break the system without user intervention."
msgstr ""
# type: Plain text
#: debconf-devel.7:308
msgid ""
"Debconf decides if the question is actually displayed, based on its "
"priority, and whether the user has seen it before, and which frontend is "
"being used. If the question will not be displayed, debconf replies with code "
"30."
msgstr ""
# type: TP
#: debconf-devel.7:309
#, no-wrap
msgid "B<GO>"
msgstr ""
# type: Plain text
#: debconf-devel.7:314
msgid ""
"Tells debconf to display the accumulated set of questions (from INPUT "
"commands) to the user."
msgstr ""
# type: Plain text
#: debconf-devel.7:317
msgid ""
"If the backup capability is supported and the user indicates they want to "
"back up a step, debconf replies with code 30."
msgstr ""
# type: TP
#: debconf-devel.7:318
#, no-wrap
msgid "B<CLEAR>"
msgstr ""
# type: Plain text
#: debconf-devel.7:322
msgid ""
"Clears the accumulated set of questions (from INPUT commands) without "
"displaying them."
msgstr ""
# type: TP
#: debconf-devel.7:322
#, no-wrap
msgid "B<BEGINBLOCK>"
msgstr ""
# type: TP
#: debconf-devel.7:324
#, no-wrap
msgid "B<ENDBLOCK>"
msgstr ""
# type: Plain text
#: debconf-devel.7:332
msgid ""
"Some debconf frontends can display a number of questions to the user at "
"once. Maybe in the future a frontend will even be able to group these "
"questions into blocks on screen. BEGINBLOCK and ENDBLOCK can be placed "
"around a set of INPUT commands to indicate blocks of questions (and blocks "
"can even be nested). Since no debconf frontend is so sophisticated yet, "
"these commands are ignored for now."
msgstr ""
# type: TP
#: debconf-devel.7:332
#, no-wrap
msgid "B<STOP>"
msgstr ""
# type: Plain text
#: debconf-devel.7:336
msgid ""
"This command tells debconf that you're done talking to it. Often debconf can "
"detect termination of your program and this command is not necessary."
msgstr ""
# type: TP
#: debconf-devel.7:336
#, no-wrap
msgid "B<GET question>"
msgstr ""
# type: Plain text
#: debconf-devel.7:341
msgid ""
"After using INPUT and GO to display a question, you can use this command to "
"get the value the user entered. The value is returned in the extended result "
"code."
msgstr ""
# type: TP
#: debconf-devel.7:341
#, no-wrap
msgid "B<SET question value>"
msgstr ""
# type: Plain text
#: debconf-devel.7:345
msgid ""
"This sets the value of a question, and it can be used to override the "
"default value with something your program calculates on the fly."
msgstr ""
# type: TP
#: debconf-devel.7:345
#, no-wrap
msgid "B<RESET question>"
msgstr ""
# type: Plain text
#: debconf-devel.7:349
msgid ""
"This resets the question to its default value (as is specified in the "
"'Default' field of its template)."
msgstr ""
# type: TP
#: debconf-devel.7:349
#, no-wrap
msgid "B<SUBST question key value>"
msgstr ""
# type: Plain text
#: debconf-devel.7:358
msgid ""
"Questions can have substitutions embedded in their 'Description' and "
"'Choices' fields (use of substitutions in 'Choices' fields is a bit of a "
"hack though; a better mechanism will eventually be developed). These "
"substitutions look like \"${key}\". When the question is displayed, the "
"substitutions are replaced with their values. This command can be used to "
"set the value of a substitution. This is useful if you need to display some "
"message to the user that you can't hard-code in the templates file."
msgstr ""
# type: Plain text
#: debconf-devel.7:361
msgid ""
"Do not try to use SUBST to change the default value of a question; it won't "
"work since there is a SET command explicitly for that purpose."
msgstr ""
# type: TP
#: debconf-devel.7:361
#, no-wrap
msgid "B<FGET question flag>"
msgstr ""
# type: Plain text
#: debconf-devel.7:365
msgid ""
"Questions can have flags associated with them. The flags can have a value of "
"\"true\" or \"false\". This command returns the value of a flag."
msgstr ""
# type: TP
#: debconf-devel.7:365
#, no-wrap
msgid "B<FSET question flag value>"
msgstr ""
# type: Plain text
#: debconf-devel.7:370
msgid ""
"This sets the value of a question's flag. The value must be either \"true\" "
"or \"false\"."
msgstr ""
# type: Plain text
#: debconf-devel.7:376
msgid ""
"One common flag is the \"seen\" flag. It is normally only set if a user has "
"already seen a question. Debconf usually only displays questions to users if "
"they have the seen flag set to \"false\" (or if it is reconfiguring a "
"package). Sometimes you want the user to see a question again -- in these "
"cases you can set the seen flag to false to force debconf to redisplay it."
msgstr ""
# type: TP
#: debconf-devel.7:377
#, no-wrap
msgid "B<METAGET question field>"
msgstr ""
# type: Plain text
#: debconf-devel.7:381
msgid ""
"This returns the value of any field of a question's associated template (the "
"Description, for example)."
msgstr ""
# type: TP
#: debconf-devel.7:381
#, no-wrap
msgid "B<REGISTER template question>"
msgstr ""
# type: Plain text
#: debconf-devel.7:387
msgid ""
"This creates a new question that is bound to a template. By default each "
"template has an associated question with the same name. However, any number "
"of questions can really be associated with a template, and this lets you "
"create more such questions."
msgstr ""
# type: TP
#: debconf-devel.7:387
#, no-wrap
msgid "B<UNREGISTER question>"
msgstr ""
# type: Plain text
#: debconf-devel.7:390
msgid "This removes a question from the database."
msgstr ""
# type: TP
#: debconf-devel.7:390
#, no-wrap
msgid "B<PURGE>"
msgstr ""
# type: Plain text
#: debconf-devel.7:394
msgid ""
"Call this in your postrm when your package is purged. It removes all of your "
"package's questions from debconf's database."
msgstr ""
# type: TP
#: debconf-devel.7:394
#, no-wrap
msgid "B<X_LOADTEMPLATEFILE /path/to/templates [owner]>"
msgstr ""
# type: Plain text
#: debconf-devel.7:398
msgid ""
"This extension loads the specified template file, into debconf's database. "
"The owner defaults to the package that is being configured with debconf."
msgstr ""
# type: Plain text
#: debconf-devel.7:400
msgid "Here is a simple example of the debconf protocol in action."
msgstr ""
# type: Plain text
#: debconf-devel.7:414
#, no-wrap
msgid ""
" INPUT medium debconf/frontend\n"
" 30 question skipped\n"
" FSET debconf/frontend seen false\n"
" 0 false\n"
" INPUT high debconf/frontend\n"
" 0 question will be asked\n"
" GO\n"
" [ Here debconf displays a question to the user. ]\n"
" 0 ok\n"
" GET no/such/question\n"
" 10 no/such/question doesn't exist\n"
" GET debconf/frontend\n"
" 0 Dialog\n"
msgstr ""
# type: SH
#: debconf-devel.7:414
#, no-wrap
msgid "LIBRARIES"
msgstr ""
# type: Plain text
#: debconf-devel.7:418
msgid ""
"Setting things up so you can talk to debconf, and speaking the debconf "
"protocol by hand is a little too much work, so some thin libraries exist to "
"relieve this minor drudgery."
msgstr ""
# type: Plain text
#: debconf-devel.7:425
msgid ""
"For shell programming, there is the /usr/share/debconf/confmodule library, "
"which you can source at the top of a shell script, and talk to debconf in a "
"fairly natural way, using lower-case versions of the debconf protocol "
"commands, that are prefixed with \"db_\" (ie, \"db_input\" and \"db_go\"). "
"For details, see B<confmodule(3)>."
msgstr ""
# type: Plain text
#: debconf-devel.7:429
msgid ""
"Perl programmers can use the B<Debconf::Client::ConfModule(3)> perl module, "
"and python programmers can use the debconf python module."
msgstr ""
# type: Plain text
#: debconf-devel.7:433
msgid ""
"The rest of this manual will use the /usr/share/debconf/confmodule library "
"in example shell scripts. Here is an example config script using that "
"library, that just asks a question:"
msgstr ""
# type: Plain text
#: debconf-devel.7:440
#, no-wrap
msgid ""
" #!/bin/sh\n"
" set -e\n"
" . /usr/share/debconf/confmodule\n"
" db_set mypackage/reboot-now false\n"
" db_input high mypackage/reboot-now || true\n"
" db_go || true\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:445
msgid ""
"Notice the uses of \"|| true\" to prevent the script from dying if debconf "
"decides it can't display a question, or the user tries to back up. In those "
"situations, debconf returns a non-zero exit code, and since this shell "
"script is set -e, an untrapped exit code would make it abort."
msgstr ""
# type: Plain text
#: debconf-devel.7:449
msgid ""
"And here is a corresponding postinst script, that uses the user's answer to "
"the question to see if the system should be rebooted (a rather absurd "
"example..):"
msgstr ""
# type: Plain text
#: debconf-devel.7:457
#, no-wrap
msgid ""
" #!/bin/sh\n"
" set -e\n"
" . /usr/share/debconf/confmodule\n"
" db_get mypackage/reboot-now\n"
" if [ \"$RET\" = true ]; then\n"
" \tshutdown -r now\n"
" fi\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:460
msgid ""
"Notice the use of the $RET variable to get at the extended return code from "
"the GET command, which holds the user's answer to the question."
msgstr ""
# type: SH
#: debconf-devel.7:460
#, no-wrap
msgid "THE POSTINST SCRIPT"
msgstr ""
# type: Plain text
#: debconf-devel.7:464
msgid ""
"The last section had an example of a postinst script that uses debconf to "
"get the value of a question, and act on it. Here are some things to keep in "
"mind when writing postinst scripts that use debconf:"
msgstr ""
# type: Plain text
#: debconf-devel.7:468
msgid ""
"Avoid asking questions in the postinst. Instead, the config script should "
"ask questions using debconf, so that pre-configuration will work."
msgstr ""
# type: Plain text
#: debconf-devel.7:474
msgid ""
"Always source /usr/share/debconf/confmodule at the top of your postinst, "
"even if you won't be running any db_* commands in it. This is required to "
"make sure the config script gets a chance to run (see HACKS for details)."
msgstr ""
# type: Plain text
#: debconf-devel.7:479
msgid ""
"Avoid outputting anything to stdout in your postinst, since that can confuse "
"debconf, and postinst should not be verbose anyway. Output to stderr is ok, "
"if you must."
msgstr ""
# type: Plain text
#: debconf-devel.7:484
msgid ""
"If your postinst launches a daemon, make sure you tell debconf to STOP at "
"the end, since debconf can become a little confused about when your postinst "
"is done otherwise."
msgstr ""
# type: Plain text
#: debconf-devel.7:489
msgid ""
"Make your postinst script accept a first parameter of \"reconfigure\". It "
"can treat it just like \"configure\". This will be used in a later version "
"of debconf to let postinsts know when they are reconfigured."
msgstr ""
# type: SH
#: debconf-devel.7:489
#, no-wrap
msgid "OTHER SCRIPTS"
msgstr ""
# type: Plain text
#: debconf-devel.7:497
msgid ""
"Besides the config script and postinst, you can use debconf in any of the "
"other maintainer scripts. Most commonly, you'll be using debconf in your "
"postrm, to call the PURGE command when your package is removed, to clean out "
"its entries in the debconf database. (This is automatically set up for you "
"by B<dh_installdebconf>(1)B<,> by the way.)"
msgstr ""
# type: Plain text
#: debconf-devel.7:505
msgid ""
"A more involved use of debconf would be if you want to use it in the postrm "
"when your package is purged, to ask a question about deleting something. Or "
"maybe you find you need to use it in the preinst or prerm for some reason. "
"All of these uses will work, though they'll probably involve asking "
"questions and acting on the answers in the same program, rather than "
"separating the two activities as is done in the config and postinst scripts."
msgstr ""
# type: Plain text
#: debconf-devel.7:510
msgid ""
"Note that if your package's sole use of debconf is in the postrm, you should "
"make your package's postinst source /usr/share/debconf/confmodule, to give "
"debconf a chance to load up your templates file into its database. Then the "
"templates will be available when your package is being purged."
msgstr ""
# type: Plain text
#: debconf-devel.7:517
msgid ""
"You can also use debconf in other, standalone programs. The issue to watch "
"out for here is that debconf is not intended to be, and must not be used as "
"a registry. This is unix after all, and programs are configured by files in /"
"etc, not by some nebulous debconf database (that is only a cache anyway and "
"might get blown away). So think long and hard before using debconf in a "
"standalone program."
msgstr ""
# type: Plain text
#: debconf-devel.7:522
msgid ""
"There are times when it can make sense, as in the apt-setup program which "
"uses debconf to prompt the user in a manner consistent with the rest of the "
"debian install process, and immediately acts on their answers to set up "
"apt's sources.list."
msgstr ""
# type: SH
#: debconf-devel.7:522
#, no-wrap
msgid "LOCALIZATION"
msgstr ""
# type: Plain text
#: debconf-devel.7:529
msgid ""
"Debconf supports localization of templates files. This is accomplished by "
"adding more fields, with translated text in them. Any of the fields can be "
"translated. For example, you might want to translate the description into "
"Spanish. Just make a field named 'Description-es' that holds the "
"translation. If a translated field is not available, debconf falls back to "
"the normal English field."
msgstr ""
# type: Plain text
#: debconf-devel.7:535
msgid ""
"Besides the 'Description' field, you should translate the 'Choices' field of "
"a select or multiselect template. Be sure to list the translated choices in "
"the same order as they appear in the main 'Choices' field. You do not need "
"to translate the 'Default' field of a select or multiselect question, and "
"the value of the question will be automatically returned in English."
msgstr ""
# type: Plain text
#: debconf-devel.7:545
msgid ""
"You will find it easier to manage translations if you keep them in separate "
"files; one file per translation. In the past, the B<debconf-getlang>(1) and "
"B<debconf-mergetemplate>(1) programs were used to manage debian/template.ll "
"files. This has been superseded by the po-debconf package, which lets you "
"deal with debconf translations in .po files, just like any other "
"translations. Your translators will thank you for using this new improved "
"mechanism."
msgstr ""
# type: Plain text
#: debconf-devel.7:551
msgid ""
"For the details on po-debconf, see its README file. If you're using "
"debhelper, converting to po-debconf is as simple as running the B<debconf-"
"gettextize>(1) command once, and adding a Build-Dependency on po-debconf "
"and on debhelper (E<gt>= 4.1.13)."
msgstr ""
# type: SH
#: debconf-devel.7:551
#, no-wrap
msgid "PUTTING IT ALL TOGETHER"
msgstr ""
# type: Plain text
#: debconf-devel.7:561
msgid ""
"So you have a config script, a templates file, a postinst script that uses "
"debconf, and so on. Putting these pieces together into a debian package "
"isn't hard. You can do it by hand, or can use B<dh_installdebconf>(1) which "
"will merge your translated templates, copy the files into the right places "
"for you, and can even generate the call to PURGE that should go in your "
"postrm script. Make sure that your package depends on debconf (E<gt>= 0.5), "
"since earlier versions were not compatible with everything described in this "
"manual. And you're done."
msgstr ""
# type: Plain text
#: debconf-devel.7:564
msgid ""
"Well, except for testing, debugging, and actually using debconf for more "
"interesting things than asking a few basic questions. For that, read on.."
msgstr ""
# type: SH
#: debconf-devel.7:564
#, no-wrap
msgid "DEBUGGING"
msgstr ""
# type: Plain text
#: debconf-devel.7:569
msgid ""
"So you have a package that's supposed to use debconf, but it doesn't quite "
"work. Maybe debconf is just not asking that question you set up. Or maybe "
"something weirder is happening; it spins forever in some kind of loop, or "
"worse. Luckily, debconf has plenty of debugging facilities."
msgstr ""
# type: Plain text
#: debconf-devel.7:576
msgid ""
"The first thing to reach for is the DEBCONF_DEBUG environment variable. If "
"you set and export DEBCONF_DEBUG=developer, debconf will output to stderr a "
"dump of the debconf protocol as your program runs. It'll look something like "
"this -- the typo is made clear:"
msgstr ""
# type: Plain text
#: debconf-devel.7:581
#, no-wrap
msgid ""
" debconf (developer): E<lt>-- input high debconf/frontand\n"
" debconf (developer): --E<gt> 10 \"debconf/frontand\" doesn't exist\n"
" debconf (developer): E<lt>-- go\n"
" debconf (developer): --E<gt> 0 ok\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:585
msgid ""
"It's rather useful to use debconf's readline frontend when you're debugging "
"(in the author's opinion), as the questions don't get in the way, and all "
"the debugging output is easily preserved and logged."
msgstr ""
# type: TP
#: debconf-devel.7:586
#, no-wrap
msgid "B<debconf-communicate>"
msgstr ""
# type: Plain text
#: debconf-devel.7:592
msgid ""
"Another useful tool is the B<debconf-communicate>(1) program. Fire it up "
"and you can speak the raw debconf protocol to debconf, interactively. This "
"is a great way to try stuff out on the fly."
msgstr ""
# type: TP
#: debconf-devel.7:592
#, no-wrap
msgid "B<debconf-show>"
msgstr ""
# type: Plain text
#: debconf-devel.7:598
msgid ""
"If a user is reporting a problem, B<debconf-show>(1) can be used to dump "
"out all the questions owned by your package, displaying their values and "
"whether the user has seen them."
msgstr ""
# type: TP
#: debconf-devel.7:598
#, no-wrap
msgid "B<.debconfrc>"
msgstr ""
# type: Plain text
#: debconf-devel.7:609
msgid ""
"To avoid the often tedious build/install/debug cycle, it can be useful to "
"load up your templates with B<debconf-loadtemplate>(1) and run your config "
"script by hand with the B<debconf>(1) command. However, you still have to "
"do that as root, right? Not so good. And ideally you'd like to be able to "
"see what a fresh installation of your package looks like, with a clean "
"debconf database."
msgstr ""
# type: Plain text
#: debconf-devel.7:615
msgid ""
"It turns out that if you set up a ~/.debconfrc file for a normal user, "
"pointing at a personal config.dat and template.dat for the user, you can "
"load up templates and run config scripts all you like, without any root "
"access. If you want to start over with a clean database, just blow away the "
"*.dat files."
msgstr ""
# type: Plain text
#: debconf-devel.7:620
msgid ""
"For details about setting this up, see B<debconf.conf>(5)B<,> and note that /"
"etc/debconf.conf makes a good template for a personal ~/.debconfrc file."
msgstr ""
# type: SH
#: debconf-devel.7:621
#, no-wrap
msgid "ADVANCED PROGRAMMING WITH DEBCONF"
msgstr ""
# type: SS
#: debconf-devel.7:622
#, no-wrap
msgid "Config file handling"
msgstr ""
# type: Plain text
#: debconf-devel.7:629
msgid ""
"Many of you seem to want to use debconf to help manage config files that are "
"part of your package. Perhaps there is no good default to ship in a "
"conffile, and so you want to use debconf to prompt the user, and write out a "
"config file based on their answers. That seems easy enough to do, but then "
"you consider upgrades, and what to do when someone modifies the config file "
"you generate, and dpkg-reconfigure, and ..."
msgstr ""
# type: Plain text
#: debconf-devel.7:637
msgid ""
"There are a lot of ways to do this, and most of them are wrong, and will "
"often earn you annoyed bug reports. Here is one right way to do it. It "
"assumes that your config file is really just a series of shell variables "
"being set, with comments in between, and so you can just source the file to "
"\"load\" it. If you have a more complicated format, reading (and writing) "
"it becomes a bit trickier."
msgstr ""
# type: Plain text
#: debconf-devel.7:639
msgid "Your config script will look something like this:"
msgstr ""
# type: Plain text
#: debconf-devel.7:644 debconf-devel.7:666
#, no-wrap
msgid ""
" #!/bin/sh\n"
" CONFIGFILE=/etc/foo.conf\n"
" set -e\n"
" . /usr/share/debconf/confmodule\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:648
#, no-wrap
msgid ""
" # Load config file, if it exists.\n"
" if [ -e $CONFIGFILE ]; then\n"
" \t. $CONFIGFILE || true\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:654
#, no-wrap
msgid ""
" \t# Store values from config file into\n"
" \t# debconf db.\n"
" \tdb_set mypackage/foo \"$FOO\"\n"
" \tdb_set mypackage/bar \"$BAR\"\n"
" fi\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:659
#, no-wrap
msgid ""
" # Ask questions.\n"
" db_input medium mypackage/foo || true\n"
" db_input medium mypackage/bar || true\n"
" db_go || true\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:661
msgid "And the postinst will look something like this:"
msgstr ""
# type: Plain text
#: debconf-devel.7:675
#, no-wrap
msgid ""
" # Generate config file, if it doesn't exist.\n"
" # An alternative is to copy in a template\n"
" # file from elsewhere.\n"
" if [ ! -e $CONFIGFILE ]; then\n"
" \techo \"# Config file for my package\" E<gt> $CONFIGFILE\n"
" \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
" \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
" fi\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:685
#, no-wrap
msgid ""
" # Substitute in the values from the debconf db.\n"
" # There are obvious optimizations possible here.\n"
" # The cp before the sed ensures we do not mess up\n"
" # the config file's ownership and permissions.\n"
" db_get mypackage/foo\n"
" FOO=\"$RET\"\n"
" db_get mypackage/bar\n"
" BAR=\"$RET\"\n"
" cp -a -f $CONFIGFILE $CONFIGFILE.tmp\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:692
#, no-wrap
msgid ""
" # If the admin deleted or commented some variables but then set\n"
" # them via debconf, (re-)add them to the conffile.\n"
" test -z \"$FOO\" || grep -Eq '^ *FOO=' $CONFIGFILE || \\e\n"
" \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
" test -z \"$BAR\" || grep -Eq '^ *BAR=' $CONFIGFILE || \\e\n"
" \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:697
#, no-wrap
msgid ""
" sed -e \"s/^ *FOO=.*/FOO=\\e\"$FOO\\e\"/\" \\e\n"
" -e \"s/^ *BAR=.*/BAR=\\e\"$BAR\\e\"/\" \\e\n"
" E<lt> $CONFIGFILE E<gt> $CONFIGFILE.tmp\n"
" mv -f $CONFIGFILE.tmp $CONFIGFILE\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:705
msgid ""
"Consider how these two scripts handle all the cases. On fresh installs the "
"questions are asked by the config script, and a new config file generated by "
"the postinst. On upgrades and reconfigures, the config file is read in, and "
"the values in it are used to change the values in the debconf database, so "
"the admin's manual changes are not lost. The questions are asked again (and "
"may or may not be displayed). Then the postinst substitutes the values back "
"into the config file, leaving the rest of it unchanged."
msgstr ""
# type: SS
#: debconf-devel.7:705
#, no-wrap
msgid "Letting the user back up"
msgstr ""
# type: Plain text
#: debconf-devel.7:711
msgid ""
"Few things are more frustrating when using a system like debconf than being "
"asked a question, and answering it, then moving on to another screen with a "
"new question on it, and realizing that hey, you made a mistake, with that "
"last question, and you want to go back to it, and discovering that you can't."
msgstr ""
# type: Plain text
#: debconf-devel.7:717
msgid ""
"Since debconf is driven by your config script, it can't jump back to a "
"previous question on its own but with a little help from you, it can "
"accomplish this feat. The first step is to make your config script let "
"debconf know it is capable of handling the user pressing a back button. You "
"use the CAPB command to do this, passing backup as a parameter."
msgstr ""
# type: Plain text
#: debconf-devel.7:721
msgid ""
"Then after each GO command, you must test to see if the user asked to back "
"up (debconf returns a code of 30), and if so jump back to the previous "
"question."
msgstr ""
# type: Plain text
#: debconf-devel.7:727
msgid ""
"There are several ways to write the control structures of your program so it "
"can jump back to previous questions when necessary. You can write goto-laden "
"spaghetti code. Or you can create several functions and use recursion. But "
"perhaps the cleanest and easiest way is to construct a state machine. Here "
"is a skeleton of a state machine that you can fill out and expand."
msgstr ""
"Es gibt mehrere M?glichkeiten, die Kontrollstrukturen Ihres Programmes zu "
"schreiben, so dass sie bei Bedarf zu vorhergehenden Fragen zur?ckspringen "
"k?nnen. Sie k?nnen Spaghetti-Code (voller GOTOs) schreiben. Oder Sie k?nnen "
"mehrere Funktionen erstellen und Rekursion verwenden. Aber die "
"wahrscheinlich sauberste und leichteste Art ist die Erstellung einer "
"Zustandsmaschine. Hier ist ein Skelett einer Zustandsmaschine, das Sie "
"ausf?llen und erweitern k?nnen:"
# type: Plain text
#: debconf-devel.7:732
#, no-wrap
msgid ""
" #!/bin/sh\n"
" set -e\n"
" . /usr/share/debconf/confmodule\n"
" db_capb backup\n"
msgstr ""
" #!/bin/sh\n"
" set -e\n"
" . /usr/share/debconf/confmodule\n"
" db_capb backup\n"
# type: Plain text
#: debconf-devel.7:759
#, no-wrap
msgid ""
" STATE=1\n"
" while true; do\n"
" \tcase \"$STATE\" in\n"
" \t1)\n"
" \t\t# Two unrelated questions.\n"
" \t\tdb_input medium my/question || true\n"
" \t\tdb_input medium my/other_question || true\n"
" \t;;\n"
" \t2)\n"
" \t\t# Only ask this question if the\n"
" \t\t# first question was answered in\n"
" \t\t# the affirmative.\n"
" \tdb_get my/question\n"
" \t\tif [ \"$RET\" = \"true\" ]; then\n"
" \t\t\tdb_input medium my/dep_question || true\n"
" \t\tfi\n"
" \t;;\n"
" \t*)\n"
" \t\t# The default case catches when $STATE is greater than the\n"
" \t\t# last implemented state, and breaks out of the loop. This\n"
" \t\t# requires that states be numbered consecutively from 1\n"
" \t\t# with no gaps, as the default case will also be entered\n"
" \t\t# if there is a break in the numbering\n"
" \t\tbreak # exits the enclosing \"while\" loop\n"
"\t;;\n"
" \tesac\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:766
#, no-wrap
msgid ""
" \tif db_go; then\n"
" \t\tSTATE=$(($STATE + 1))\n"
" \telse\n"
" \t\tSTATE=$(($STATE - 1))\n"
" \tfi\n"
" done\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:777
#, no-wrap
msgid ""
" if [ $STATE -eq 1 ]; then\n"
" \t# The user has asked to back up from the first\n"
" \t# question. This case is problematical. Regular\n"
" \t# dpkg and apt package installation isn't capable\n"
" \t# of backing up questions between packages as this\n"
" \t# is written, so this will exit leaving the package\n"
" \t# unconfigured - probably the best way to handle\n"
" \t# the situation.\n"
" \texit 10\n"
" fi\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:782
msgid ""
"Note that if all your config script does is ask a few unrelated questions, "
"then there is no need for the state machine. Just ask them all, and GO; "
"debconf will do its best to present them all in one screen, and the user "
"won't need to back up."
msgstr ""
# type: SS
#: debconf-devel.7:782
#, no-wrap
msgid "Preventing infinite loops"
msgstr "Verhinderung von Endlosschleifen"
# type: Plain text
#: debconf-devel.7:786
msgid ""
"One gotcha with debconf comes up if you have a loop in your config script. "
"Suppose you're asking for input and validating it, and looping if it's not "
"valid:"
msgstr ""
# type: Plain text
#: debconf-devel.7:796
#, no-wrap
msgid ""
" ok=''\n"
" do while [ ! \"$ok\" ];\n"
" \tdb_input low foo/bar || true\n"
" \tdb_go || true\n"
" \tdb_get foo/bar\n"
" \tif [ \"$RET\" ]; then\n"
" \t\tok=1\n"
" \tfi\n"
" done\n"
msgstr ""
" ok=''\n"
" do while [ ! \"$ok\" ];\n"
" \tdb_input low foo/bar || true\n"
" \tdb_go || true\n"
" \tdb_get foo/bar\n"
" \tif [ \"$RET\" ]; then\n"
" \t\tok=1\n"
" \tfi\n"
" done\n"
# type: Plain text
#: debconf-devel.7:803
msgid ""
"This looks ok at first glance. But consider what happens if the value of foo/"
"bar is \"\" when this loop is entered, and the user has their priority set "
"high, or is using a non-interactive frontend, and so they are not really "
"asked for input. The value of foo/bar is not changed by the db_input, and so "
"it fails the test and loops. And loops ..."
msgstr ""
# type: Plain text
#: debconf-devel.7:809
msgid ""
"One fix for this is to make sure that before the loop is entered, the value "
"of foo/bar is set to something that will pass the test in the loop. So for "
"example if the default value of foo/bar is \"1\", then you could RESET foo/"
"bar just before entering the loop."
msgstr ""
# type: Plain text
#: debconf-devel.7:813
msgid ""
"Another fix is to check the return code of the INPUT command. If it is 30 "
"then the user is not being shown the question you asked them, and you should "
"break out of the loop."
msgstr ""
# type: SS
#: debconf-devel.7:813
#, no-wrap
msgid "Choosing among related packages"
msgstr ""
# type: Plain text
#: debconf-devel.7:818
msgid ""
"Sometimes a set of related packages can be installed, and you want to prompt "
"the user which of the set should be used by default. Examples of such sets "
"are window managers, or ispell dictionary files."
msgstr ""
# type: Plain text
#: debconf-devel.7:824
msgid ""
"While it would be possible for each package in the set to simply prompt, "
"\"Should this package be default?\", this leads to a lot of repetitive "
"questions if several of the packages are installed. It's possible with "
"debconf to present a list of all the packages in the set and allow the user "
"to choose between them. Here's how."
msgstr ""
# type: Plain text
#: debconf-devel.7:827
msgid ""
"Make all the packages in the set use a shared template. Something like this:"
msgstr ""
# type: Plain text
#: debconf-devel.7:834
#, no-wrap
msgid ""
" Template: shared/window-manager\n"
" Type: select\n"
" Choices: ${choices}\n"
" Description: Select the default window manager.\n"
" Select the window manager that will be started by\n"
" default when X starts.\n"
msgstr ""
# type: Plain text
#: debconf-devel.7:837
msgid ""
"Each package should include a copy of the template. Then it should include "
"some code like this in its config script:"
msgstr ""
"Jedes Paket sollte eine Kopie der Vorlage beinhalten. Dann sollte es auch "
"Code der folgenden Art in seinem Konfigurationsskript enthalten:"
# type: Plain text
#: debconf-devel.7:842
#, no-wrap
msgid ""
" db_metaget shared/window-manager owners\n"
" OWNERS=$RET\n"
" db_metaget shared/window-manager choices\n"
" CHOICES=$RET\n"
msgstr ""
" db_metaget shared/window-manager owners\n"
" OWNERS=$RET\n"
" db_metaget shared/window-manager choices\n"
" CHOICES=$RET\n"
# type: Plain text
#: debconf-devel.7:847
#, no-wrap
msgid ""
" if [ \"$OWNERS\" != \"$CHOICES\" ]; then\n"
" \tdb_subst shared/window-manager choices $OWNERS\n"
" \tdb_fset shared/window-manager seen false\n"
" fi\n"
msgstr ""
" if [ \"$OWNERS\" != \"$CHOICES\" ]; then\n"
" \tdb_subst shared/window-manager choices $OWNERS\n"
" \tdb_fset shared/window-manager seen false\n"
" fi\n"
# type: Plain text
#: debconf-devel.7:850
#, no-wrap
msgid ""
" db_input medium shared/window-manager || true\n"
" db_go || true\n"
msgstr ""
" db_input medium shared/window-manager || true\n"
" db_go || true\n"
# type: Plain text
#: debconf-devel.7:858
msgid ""
"A bit of an explanation is called for. By the time your config script runs, "
"debconf has already read in all the templates for the packages that are "
"being installed. Since the set of packages share a question, debconf records "
"that fact in the owners field. By a strange coincidence, the format of the "
"owners field is the same as that of the choices field (a comma and space "
"delimited list of values)."
msgstr ""
# type: Plain text
#: debconf-devel.7:863
msgid ""
"The METAGET command can be used to get the list of owners and the list of "
"choices. If they are different, then a new package has been installed. So "
"use the SUBST command to change the list of choices to be the same as the "
"list of owners, and ask the question."
msgstr ""
# type: Plain text
#: debconf-devel.7:867
msgid ""
"When a package is removed, you probably want to see if that package is the "
"currently selected choice, and if so, prompt the user to select a different "
"package to replace it."
msgstr ""
# type: Plain text
#: debconf-devel.7:871
msgid ""
"This can be accomplished by adding something like this to the prerm scripts "
"of all related packages (replacing E<lt>packageE<gt> with the package name):"
msgstr ""
"Dies kann erreicht werden, in dem etwas der folgenden Art in die Prerm-"
"Skripte aller betroffenen Pakete eingef?gt wird (ersetzen Sie "
"E<lt>PaketE<gt> durch den Namen des Pakets."
# type: Plain text
#: debconf-devel.7:876
#, no-wrap
msgid ""
" if [ -e /usr/share/debconf/confmodule ]; then\n"
" \t. /usr/share/debconf/confmodule\n"
" \t# I no longer claim this question.\n"
" \tdb_unregister shared/window-manager\n"
msgstr ""
" if [ -e /usr/share/debconf/confmodule ]; then\n"
" \t. /usr/share/debconf/confmodule\n"
" \t# I no longer claim this question.\n"
" \tdb_unregister shared/window-manager\n"
# type: Plain text
#: debconf-devel.7:887
#, no-wrap
msgid ""
" \t# See if the shared question still exists.\n"
" \tif db_get shared/window-manager; then\n"
" \t\tdb_metaget shared/window-manager owners\n"
" \t\tdb_subst shared/window-manager choices $RET\n"
" \t\tdb_metaget shared/window-manager value\n"
" \t\tif [ \"E<lt>packageE<gt>\" = \"$RET\" ] ; then\n"
" \t\t\tdb_fset shared/window-manage seen false\n"
" \t\t\tdb_input high shared/window-manager || true\n"
" \t\t\tdb_go || true\n"
" \t\tfi\n"
msgstr ""
" \t# Pr?fe, ob die gemeinsam benutzen Fragen noch existieren.\n"
" \tif db_get shared/window-manager; then\n"
" \t\tdb_metaget shared/window-manager owners\n"
" \t\tdb_subst shared/window-manager choices $RET\n"
" \t\tdb_metaget shared/window-manager value\n"
" \t\tif [ \"E<lt>PaketE<gt>\" = \"$RET\" ] ; then\n"
" \t\t\tdb_fset shared/window-manage seen false\n"
" \t\t\tdb_input high shared/window-manager || true\n"
" \t\t\tdb_go || true\n"
" \t\tfi\n"
# type: Plain text
#: debconf-devel.7:892
#, no-wrap
msgid ""
" \t\t# Now do whatever the postinst script did\n"
" \t\t# to update the window manager symlink.\n"
" \tfi\n"
" fi\n"
msgstr ""
# type: SH
#: debconf-devel.7:892
#, no-wrap
msgid "HACKS"
msgstr "HACKS"
# type: Plain text
#: debconf-devel.7:895
msgid ""
"Debconf is currently not fully integrated into dpkg (but I want to change "
"this in the future), and so some messy hacks are currently called for."
msgstr ""
"Debconf ist derzeit nicht komplett in Dpkg integriert (ich m?chte dies aber "
"zuk?nftig ?ndern) und daher werden einige schmutzige Hacks ben?tigt."
# type: Plain text
#: debconf-devel.7:906
msgid ""
"The worst of these involves getting the config script to run. The way that "
"works now is the config script will be run when the package is pre-"
"configured. Then, when the postinst script runs, it starts up debconf again. "
"Debconf notices it is being used by the postinst script, and so it goes off "
"and runs the config script. This can only work if your postinst loads up one "
"of the debconf libraries though, so postinsts always have to take care to do "
"that. We hope to address this later by adding explicit support to dpkg for "
"debconf. The B<debconf>(1) program is a step in this direction."
msgstr ""
# type: Plain text
#: debconf-devel.7:917
msgid ""
"A related hack is getting debconf running when a config script, postinst, or "
"other program that uses it starts up. After all, they expect to be able to "
"talk to debconf right away. The way this is accomplished for now is that "
"when such a script loads a debconf library (like /usr/share/debconf/"
"confmodule), and debconf is not already running, it is started up, and a new "
"copy of the script is re-execed. The only noticeable result is that you need "
"to put the line that loads a debconf library at the very top of the script, "
"or weird things will happen. We hope to address this later by changing how "
"debconf is invoked, and turning it into something more like a transient "
"daemon."
msgstr ""
# type: Plain text
#: debconf-devel.7:928
msgid ""
"It's rather hackish how debconf figures out what templates files to load, "
"and when it loads them. When the config, preinst, and postinst scripts "
"invoke debconf, it will automatically figure out where the templates file "
"is, and load it. Standalone programs that use debconf will cause debconf to "
"look for templates files in /usr/share/debconf/templates/progname."
"templates. And if a postrm wants to use debconf at purge time, the "
"templates won't be available unless debconf had a chance to load them in its "
"postinst. This is messy, but rather unavoidable. In the future some of these "
"programs may be able to use debconf-loadtemplate by hand though."
msgstr ""
# type: Plain text
#: debconf-devel.7:936
msgid ""
"/usr/share/debconf/confmodule's historic behavior of playing with file "
"descriptors and setting up a fd #3 that talks to debconf, can cause all "
"sorts of trouble when a postinst runs a daemon, since the daemon ends up "
"talking to debconf, and debconf can't figure out when the script terminates. "
"The STOP command can work around this. In the future, we are considering "
"making debconf communication happen over a socket or some other mechanism "
"than stdio."
msgstr ""
# type: Plain text
#: debconf-devel.7:944
msgid ""
"Debconf sets DEBCONF_RECONFIGURE=1 before running postinst scripts, so a "
"postinst script that needs to avoid some expensive operation when "
"reconfigured can look at that variable. This is a hack because the right "
"thing would be to pass $1 = \"reconfigure\", but doing so without breaking "
"all the postinsts that use debconf is difficult. The migration plan away "
"from this hack is to encourage people to write postinsts that accept "
"\"reconfigure\", and once they all do, begin passing that variable."
msgstr ""
# type: Plain text
#: debconf-devel.7:947
msgid "B<debconf>(7) is the debconf user's guide."
msgstr "B<debconf>(7) ist der Benutzerleitfaden von Debconf."
# type: Plain text
#: debconf-devel.7:950
msgid ""
"The debconf specification in debian policy is the canonical definition of "
"the debconf protocol. /usr/share/doc/debian-policy/debconf_specification.txt."
"gz"
msgstr ""
"Die Debcon-Spezifikation in den Debian-Richtlinien (?policy?) ist die "
"kanonische Definition des Debconf-Proto'kolls. /usr/share/doc/debian-policy/"
"debconf_specification.txt.gz"
# type: Plain text
#: debconf-devel.7:954
msgid ""
"B<debconf.conf>(5) has much useful information, including some info about "
"the backend database."
msgstr ""
"In B<debconf.conf>(5) sind viele n?tzliche Informationen, darunter auch "
"?ber die Backend-Datenbank."
More information about the Debconf-devel
mailing list