need help

[Vlim]

Thanks,

Turn off the HW shaking helps.


Victor

________________________________
From: Giulio Benetti <giulio.benetti at benettiengineering.com>
Sent: Wednesday, July 2, 2025 11:04
To: Vlim <vlim at gigadevice.com>
Cc: minicom-devel at lists.alioth.debian.org <minicom-devel at lists.alioth.debian.org>
Subject: Re: need help

You don't often get email from giulio.benetti at benettiengineering.com. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification>
此为外部邮件，谨防钓鱼邮件，请注意邮件是否涉及敏感信息
This is an external email, beware of phishing emails. Please pay close attention to whether the email contains sensitive information
Hi Victor,

have you checked that HW shaking set to OFF?
Also XON/XOFF?

Best regards
Giulio

Il giorno 2 lug 2025, alle ore 19:44, Vlim <vlim at gigadevice.com> ha scritto:


Hi, Minicom team,

I am using minicom on Ubuntu 22.04.5 along with Xilinx tools.
I am able to receive data transection from Xilinx tool to minicom.
But it seem that I am not able to send data to Xilinx tool.

For example,
Xilinx tools boots up and run until the login in step.
I am able to see the log until this step.
At the promp for the login in name, it seems that it does not pass the login name I typed in.

By using Arduino IDE, I am able to see the transaction of the login name and the feed back from the Xilinx tool.

Hope that you can give me some guidance on how to use the minicom.

Thanks,

Victor


--
minicom-devel mailing list <minicom-devel at alioth-lists.debian.net>
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/minicom-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/minicom-devel/attachments/20250702/9849844e/attachment-0001.htm>