[Nut-upsdev] APC UPS SNMP board

[Niklas Edmundsson]

On Thu, 1 Jun 2006, kelsey hudson wrote:

>>> The  web and telnet part of it work great. However, I can't get *anything*
>>> from the snmp interface.
>
>> Turning this around a bit, are you sure that your machine isn't
>> blocking UDP traffic on port 161? Most personal firewalls default to
>> allowing outbound TCP connections, but block UDP traffic that isn't
>> strictly necessary (DNS, DHCP if applicable).
>
> I'm certain this is not the case, as I use the same machine to gather SNMP 
> statistics on 30+ other devices (mrtg, et al). Besides, I use central 
> firewall strategem here.
>
> Thanks for the suggestion, but that's not it :\

Given that SNMP is enabled and that the public ro community is enabled
stuff just works for us...

If you drop the MIB in a directory called mibs you should be able to 
do:
snmpwalk -m PowerNet-MIB -M +mibs -Oq your-ups public enterprises
and get a nice tree, but I guess you already have tried that...


/Nikke
-- 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
  Niklas Edmundsson, Admin @ {acc,hpc2n}.umu.se      |     nikke at acc.umu.se
---------------------------------------------------------------------------
  Whips and chains are only toys...
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=