[Nut-upsdev] Backups 300VA (BK-300C) Drivers

[Peter Selinger]

I don't know. You should write to the mailing list, not to me
personally. I am not the only person on the list who answers
questions. -- Peter

Michael Plourde wrote:
> 
> By the way i'm using 940-0024C serial cable.
> 
> I had try generic driver and it works but i can send command with this
> driver.
> 
> Could this error:
> smartmode: ser_send_char failed: Resource temporarily unavailable
> Unable to detect an APC Smart protocol UPS on port /dev/ttyS0
> Check the cabling, port name or model name and try again
> Driver failed to start (exit status=1)
> 
> been due to cable failed ?
> 
> Michael Plourde
> ----- Original Message ----- 
> From: "Peter Selinger" <selinger at mathstat.dal.ca>
> To: "Michael Plourde" <mplourde at digicom.ca>
> Cc: "NUT-MList" <nut-upsdev at lists.alioth.debian.org>
> Sent: Monday, June 19, 2006 10:36 AM
> Subject: Re: [Nut-upsdev] Backups 300VA (BK-300C) Drivers
> 
> 
> > Serial or USB? -- Peter
> >
> > Michael Plourde wrote:
> > >
> > > Hi,
> > > What driver should i use with APC BK-300C ?
> > >
> > > Michale Plourde
> > > Digicom Technologies
> > >
> > >
> > > _______________________________________________
> > > Nut-upsdev mailing list
> > > Nut-upsdev at lists.alioth.debian.org
> > > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> > >
> >
> >
>