Fw: [Nut-upsdev] Backups 300VA (BK-300C) Drivers

[Michael Plourde]

 [BackUPS]
     driver = apcsmart
     port = /dev/ttyS0
     desc "Back-UPS BK-300 @ Cap a l'orignal"
 
> ----- Original Message ----- 
> From: "Charles Lepple" <clepple at gmail.com>
> To: "NUT-MList" <nut-upsdev at lists.alioth.debian.org>
> Sent: Monday, June 19, 2006 2:38 PM
> Subject: Re: [Nut-upsdev] Backups 300VA (BK-300C) Drivers
> 
> 
> > On 6/19/06, Michael Plourde <mplourde at digicom.ca> wrote:
> > > I had used apcsmart driver and I got this error:
> > >
> > > smartmode: ser_send_char failed: Resource temporarily unavailable
> > > Unable to detect an APC Smart protocol UPS on port /dev/ttyS0
> > > Check the cabling, port name or model name and try again
> > > Driver failed to start (exit status=1)
> > >
> > > Any idea ?
> > 
> > what does your ups.conf have?
> > 
> > -- 
> > - Charles Lepple
> > 
> > _______________________________________________
> > Nut-upsdev mailing list
> > Nut-upsdev at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> >