[Nut-upsdev] new ups for database?
Peter Selinger
selinger at mathstat.dal.ca
Sun Sep 24 23:28:16 UTC 2006
Just as many broken pipes as before. I don't think I can get this
device to work; at least I am out of ideas. It doesn't seem to follow
the USB specification.
It is normal (in fact necessary) for /dev/usb/hiddev0 to disappear.
/dev/usb/hiddev0 is for things like keyboards and mice that are
controlled by the kernel.
-- Peter
spamwhole at gmail.com wrote:
>
> Peter,
>
> One thing I have noticed is that the /dev/usb/hiddev0 device disappears
> after probing, no dmesg or anything to say it's been disconnected either.
> This could be an issue with my udev based system though. Anyway here's the
> output.
>
> thanks
>
> Rob
>
> drivers # ./newhidups -DD -u root -x generic -x vendorid=0001 auto
> Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0)
>
> debug level is '2'
> Checking device (06F2/0011) (005/005)
> - VendorID: 06f2
> - ProductID: 0011
> - Manufacturer: Justcom Technology
> - Product: USB KVM Switch
> - Serial Number: unknown
> - Bus: 005
> Trying to match device
> Device does not match - skipping
> Checking device (0D3D/0001) (005/004)
> - VendorID: 0d3d
> - ProductID: 0001
> - Manufacturer: unknown
> - Product: USBPS2
> - Serial Number: unknown
> - Bus: 005
> Trying to match device
> Device does not match - skipping
> Checking device (0451/2046) (005/002)
> - VendorID: 0451
> - ProductID: 2046
> - Manufacturer: unknown
> - Product: unknown
> - Serial Number: unknown
> - Bus: 005
> Trying to match device
> Device does not match - skipping
> Checking device (0000/0000) (005/001)
> - VendorID: 0000
> - ProductID: 0000
> - Manufacturer: Linux 2.6.18-1 uhci_hcd
> - Product: UHCI Host Controller
> - Serial Number: 0000:05:06.1
> - Bus: 005
> Trying to match device
> Device does not match - skipping
> Checking device (14AA/022B) (002/003)
> - VendorID: 14aa
> - ProductID: 022b
> - Manufacturer: Digital TV Receiver
> - Product: Digital TV Receiver
> - Serial Number: unknown
> - Bus: 002
> Trying to match device
> Device does not match - skipping
> Checking device (0000/0000) (002/001)
> - VendorID: 0000
> - ProductID: 0000
> - Manufacturer: Linux 2.6.18-1 ehci_hcd
> - Product: EHCI Host Controller
> - Serial Number: 0000:05:06.2
> - Bus: 002
> Trying to match device
> Device does not match - skipping
> Checking device (0000/0000) (004/001)
> - VendorID: 0000
> - ProductID: 0000
> - Manufacturer: Linux 2.6.18-1 uhci_hcd
> - Product: UHCI Host Controller
> - Serial Number: 0000:05:06.0
> - Bus: 004
> Trying to match device
> Device does not match - skipping
> Checking device (0001/0000) (003/009)
> - VendorID: 0001
> - ProductID: 0000
> - Manufacturer: MEC
> - Product: MEC0002
> - Serial Number: unknown
> - Bus: 003
> Trying to match device
> Device matches
> failed to claim USB device, trying 2 more time(s)...
> detaching kernel driver from USB device...
> trying again to claim USB device...
> HID descriptor retrieved (Reportlen = 624)
> Report descriptor retrieved (Reportlen = 624)
> Found HID device
> Report Descriptor size = 624
> Detected a UPS: MEC/MEC0002
> Using subdriver: GENERIC HID 0.1
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.FlowID, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.ConfigVoltage, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.ConfigFrequency, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.LowVoltageTransfer, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.HighVoltageTransfer, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.iManufacturer, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.iProduct, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.iSerialNumber, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.FlowID, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.ConfigVoltage, Type: Feature
> Can't retrieve Report 1 (-32/32): Broken pipe
> Path: 00860004.Flow.ConfigFrequency, Type: Feature
> Can't retrieve Report 2 (-32/32): Broken pipe
> Path: 00860004.Flow.ConfigApparentPower, Type: Feature
> Can't retrieve Report 2 (-32/32): Broken pipe
> Path: 00860004.Flow.ConfigActivePower, Type: Feature
> Can't retrieve Report 2 (-32/32): Broken pipe
> Path: 00860004.Flow.DelayBeforeStartup, Type: Feature
> Can't retrieve Report 2 (-32/32): Broken pipe
> Path: 00860004.Flow.DelayBeforeShutdown, Type: Feature
> Can't retrieve Report 3 (-32/32): Broken pipe
> Path: 00860004.BatterySystem.BatterySystemID, Type: Feature
> Can't retrieve Report 3 (-32/32): Broken pipe
> Path: 00860004.BatterySystem.PresentStatus.Used, Type: Feature
> Can't retrieve Report 3 (-32/32): Broken pipe
> Path: 00860004.BatterySystem.PresentStatus.Good, Type: Feature
> Can't retrieve Report 3 (-32/32): Broken pipe
> Path: 00860004.BatterySystem.Voltage, Type: Feature
> Can't retrieve Report 3 (-32/32): Broken pipe
> Path: 00860004.BatterySystem.Temperature, Type: Feature
> Can't retrieve Report 3 (-32/32): Broken pipe
> Path: 00860004.BatterySystem.Test, Type: Input
> Can't retrieve Report 3 (-32/32): Broken pipe
> Path: 00860004.BatterySystem.Test, Type: Feature
> Can't find object 00860004.PowerConverter.PowerConverterID
> Path: 00860004.PowerConverter.PowerConverterID, Type: Input
> Can't find object 00860004.PowerConverter.Input.InputID
> Path: 00860004.PowerConverter.Input.InputID, Type: Input
> Can't find object 00860004.PowerConverter.Input.FlowID
> Path: 00860004.PowerConverter.Input.FlowID, Type: Input
> Can't find object 00860004.PowerConverter.Input.PresentStatus.Good
> Path: 00860004.PowerConverter.Input.PresentStatus.Good, Type: Input
> Can't find object 00860004.PowerConverter.Input.Voltage
> Path: 00860004.PowerConverter.Input.Voltage, Type: Input
> Can't find object 00860004.PowerConverter.Input.Frequency
> Path: 00860004.PowerConverter.Input.Frequency, Type: Input
> Can't find object 00860004.PowerConverter.Output.OutputID
> Path: 00860004.PowerConverter.Output.OutputID, Type: Input
> Can't find object 00860004.PowerConverter.Output.FlowID
> Path: 00860004.PowerConverter.Output.FlowID, Type: Input
> Can't find object 00860004.PowerConverter.Output.Voltage
> Path: 00860004.PowerConverter.Output.Voltage, Type: Input
> Can't find object 00860004.PowerConverter.Output.Frequency
> Path: 00860004.PowerConverter.Output.Frequency, Type: Input
> Can't find object 00860004.PowerConverter.Output.PercentLoad
> Path: 00860004.PowerConverter.Output.PercentLoad, Type: Input
> Can't find object 00860004.PowerConverter.Output.PresentStatus.Overload
> Path: 00860004.PowerConverter.Output.PresentStatus.Overload, Type: Input
> Can't find object 00860004.PowerConverter.Output.PresentStatus.Boost
> Path: 00860004.PowerConverter.Output.PresentStatus.Boost, Type: Input
> Can't find object 00860004.PowerConverter.Output.PresentStatus.Buck
> Path: 00860004.PowerConverter.Output.PresentStatus.Buck, Type: Input
> upsdrv_updateinfo...
> dstate_init: sock /var/state/ups/newhidups-auto open on fd 5
> upsdrv_updateinfo...
> Waiting for notifications...
> upsdrv_updateinfo...
> Waiting for notifications...
> Signal 2: exiting
> Closing device
> rmk drivers
>
>
> Peter Selinger writes:
>
> > I just made a change to the newhidups driver, and there is a small
> > chance that it might help with your "Broken pipe" problem. Could you
> > update to the newest version ("svn up"), and try this again:
> >
> > ./newhidups -DD -u root -x generic -x vendorid=0001 auto
> >
> > -- Peter
> >
> > spamwhole at gmail.com wrote:
> >>
> >> Sorry, I think I was trying to run before I could walk. Here's the
> >> requested output. It looks a little on the short side...
> >>
> >>
> >> # upsc belkin at localhost
> >>
> >> driver.name: newhidups
> >> driver.parameter.port: auto
> >> driver.parameter.vendorid: 0001
> >> driver.version: 2.1.0
> >> ups.mfr: MEC
> >> ups.model: MEC0002
> >>
> >> thanks
> >>
> >> Rob
> >>
> >> Peter Selinger writes:
> >>
> >> > Hi Rob,
> >> >
> >> > thanks for trying this. The patch I sent contained only a "stub"
> >> > driver. Its purpose is to see if you can read any of the device's
> >> > variables with upsc. Please post the output of "upsc
> >> > belkin at localhost". It should list a number of variables whose names
> >> > start with the word "unmapped".
> >> >
> >> > Before this driver will be actually useful, we need to change the
> >> > names of these variables so that NUT can understand them. This is
> >> > particularly important for the status variables (online, on battery,
> >> > etc). Also, we should try and map a few instant commands - at minimum,
> >> > we need an instant command to kill the power.
> >> >
> >> > -- Peter
> >> >
> >> >
> >> > spamwhole at gmail.com wrote:
> >> >>
> >> >> Forgot to CC the list
> >> >>
> >> >> spamwhole at gmail.com writes:
> >> >>
> >> >> > Thanks for your help. The program now works and connects as expected.
> >> >> >
> >> >> > Just one quick question though, upslog doesn't seem to have any output.
> >> >> > Is this expected or should I have some details here?
> >> >> >
> >> >> > thanks
> >> >> >
> >> >> > Rob
> >> >> >
> >> >> > rmk bin # upslog -s belkin at localhost -l -
> >> >> > Network UPS Tools upslog 2.1.0
> >> >> > logging status of belkin at localhost to - (30s intervals)
> >> >> > 20060923 235602 NA NA NA [NA] NA NA
> >> >> > 20060923 235632 NA NA NA [NA] NA NA
> >> >> > 20060923 235702 NA NA NA [NA] NA NA
> >> >> >
> >> >> >
> >> >> > Peter Selinger writes:
> >> >> >
> >> >> >> P.S. you may have to start the driver with "-a belkin" or "belkin"
> >> >> >> instead of "auto", or start the driver with "upsdrvctl", to make sure
> >> >> >> that the socket is named correctly. -- Peter
> >> >> >>
> >> >> >> spamwhole at gmail.com wrote:
> >> >> >>>
> >> >> >>> Hi,
> >> >> >>>
> >> >> >>> I've checked all the permissions and they are all ok for root & nobody.
> >> >> >>> I've even tried compiling it --with-user=root, but that doesn't make
> >> >> >>> much different. Running an strace on it doesn't bring up anything
> >> >> >>> useful either.
> >> >> >>>
> >> >> >>> I've tried running it as root and using -u root. But I still get the
> >> >> >>> same problem. I'm not sure if the 'Can't connect to UPS [belkin]' is the
> >> >> >>> program trying to connect to a socket of some description, or if it's
> >> >> >>> actually trying to connect to the UPS.
> >> >> >>>
> >> >> >>> thanks
> >> >> >>>
> >> >> >>> Rob
> >> >> >>>
> >> >> >>> rmk trunk # upsd -DD -u root
> >> >> >>> Network UPS Tools upsd 2.1.0
> >> >> >>> Can't connect to UPS [belkin] (belkin): No such file or directory
> >> >> >>> Synchronizing.................. giving up
> >> >> >>>
> >> >> >>> rmk trunk # strace upsd -DD -u root
> >> >> >>> munmap(0x2b0d2b273000, 4096) = 0
> >> >> >>> socket(PF_FILE, SOCK_STREAM, 0) = 5
> >> >> >>> connect(5, {sa_family=AF_FILE, path="newhidups"}, 110) = -1 ENOENT (No
> >> >> >>> such file or directory)
> >> >> >>> close(5) = 0
> >> >> >>> write(2, "Can\'t connect to UPS [newhidups]"..., 72Can't connect to UPS
> >> >> >>> [newhidups] (newhidups): No such file or directory
> >> >> >>>
> >> >> >>>
> >> >> >>> Peter Selinger writes:
> >> >> >>>
> >> >> >>> > spamwhole at gmail.com wrote:
> >> >> >>> >> >> Hi, >> >> Thanks for the very very quick patch. But, I can't seem
> >> >> >>> to get things to >> work, unfortunately I'm not sure if the error is
> >> >> >>> user induced ;-). I get >> the following error: >> >> ups # upsd
> >> >> >>> >> Network UPS Tools upsd 2.1.0
> >> >> >>> >> /var/state/ups is world readable
> >> >> >>> >> /usr/local/ups/etc/upsd.conf is world readable
> >> >> >>> >> Can't connect to UPS [belkin] (belkin): No such file or directory
> >> >> >>> >> /usr/local/ups/etc/upsd.users is world readable
> >> >> >>> >> Synchronizing.................. giving up > > This is probably a
> >> >> >>> permissions problem. Try running upsd with "-u
> >> >> >>> > root". > > Also make sure that upsd and newhidups are from the same
> >> >> >>> NUT version. > >> Here's my ups.conf: >> >> [belkin]
> >> >> >>> >> port = /dev/usb/hiddev0 I've tried auto
> >> >> >>> >> driver = newhidups
> >> >> >>> >> vendorid = 0001 > > The "port" value is ignored; it can be any
> >> >> >>> non-empty string. > >> Here's an strace of 'upsd': >> >> [snip] >> >>
> >> >> >>> Also, as a side note the make fell over when building the driver. There
> >> >> >>> was >> a normal 'gcc' line but with no source code to compile. When I
> >> >> >>> added >> mec-hid.c I I was able to continue/finish the compile. > > You
> >> >> >>> could have also done "make depend" in drivers/. > > -- Peter > >> thanks
> >> >> >>> >> >> Rob >> >> >> Peter Selinger writes: >> >> > Thanks for the info.
> >> >> >>> Attached is the patch for an MEC subdriver stub.
> >> >> >>> >> > Plesae see if you can get this to work and read any info from the
> >> >> >>> >> > device via "upsd" and "upsc". Thanks, -- Peter >> > >> >
> >> >> >>> spamwhole at gmail.com wrote:
> >> >> >>> >> >> >> >> Peter, >> >> >> >> Please see below. I've left the extra
> >> >> >>> USB devices in there too, just in >> >> case. >> >> >> >> thanks >> >>
> >> >> >>> >> >> Rob >> >> >> >> rmk drivers # ./newhidups -DD -u root -x generic
> >> >> >>> -x vendorid=0001 auto
> >> >> >>> >> >> Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
> >> >> >>> (2.1.0) >> >> >> >> debug level is '2'
> >> >> >>> >> >> Checking device (0000/0000) (003/001)
> >> >> >>> >> >> - VendorID: 0000
> >> >> >>> >> >> - ProductID: 0000
> >> >> >>> >> >> - Manufacturer: Linux 2.6.18-1 ohci_hcd
> >> >> >>> >> >> - Product: OHCI Host Controller
> >> >> >>> >> >> - Serial Number: 0000:00:02.0
> >> >> >>> >> >> - Bus: 003
> >> >> >>> >> >> Trying to match device
> >> >> >>> >> >> Device does not match - skipping
> >> >> >>> >> >> Checking device (14AA/022B) (002/011)
> >> >> >>> >> >> - VendorID: 14aa
> >> >> >>> >> >> - ProductID: 022b
> >> >> >>> >> >> - Manufacturer: Digital TV Receiver
> >> >> >>> >> >> - Product: Digital TV Receiver
> >> >> >>> >> >> - Serial Number: unknown
> >> >> >>> >> >> - Bus: 002
> >> >> >>> >> >> Trying to match device
> >> >> >>> >> >> Device does not match - skipping
> >> >> >>> >> >> Checking device (0000/0000) (002/001)
> >> >> >>> >> >> - VendorID: 0000
> >> >> >>> >> >> - ProductID: 0000
> >> >> >>> >> >> - Manufacturer: Linux 2.6.18-1 ehci_hcd
> >> >> >>> >> >> - Product: EHCI Host Controller
> >> >> >>> >> >> - Serial Number: 0000:05:06.2
> >> >> >>> >> >> - Bus: 002
> >> >> >>> >> >> Trying to match device
> >> >> >>> >> >> Device does not match - skipping
> >> >> >>> >> >> Checking device (0000/0000) (004/001)
> >> >> >>> >> >> - VendorID: 0000
> >> >> >>> >> >> - ProductID: 0000
> >> >> >>> >> >> - Manufacturer: Linux 2.6.18-1 uhci_hcd
> >> >> >>> >> >> - Product: UHCI Host Controller
> >> >> >>> >> >> - Serial Number: 0000:05:06.0
> >> >> >>> >> >> - Bus: 004
> >> >> >>> >> >> Trying to match device
> >> >> >>> >> >> Device does not match - skipping
> >> >> >>> >> >> Checking device (0D3D/0001) (004/002)
> >> >> >>> >> >> - VendorID: 0d3d
> >> >> >>> >> >> - ProductID: 0001
> >> >> >>> >> >> - Manufacturer: unknown
> >> >> >>> >> >> - Product: USBPS2
> >> >> >>> >> >> - Serial Number: unknown
> >> >> >>> >> >> - Bus: 004
> >> >> >>> >> >> Trying to match device
> >> >> >>> >> >> Device does not match - skipping
> >> >> >>> >> >> Checking device (0000/0000) (001/001)
> >> >> >>> >> >> - VendorID: 0000
> >> >> >>> >> >> - ProductID: 0000
> >> >> >>> >> >> - Manufacturer: Linux 2.6.18-1 ehci_hcd
> >> >> >>> >> >> - Product: EHCI Host Controller
> >> >> >>> >> >> - Serial Number: 0000:00:02.1
> >> >> >>> >> >> - Bus: 001
> >> >> >>> >> >> Trying to match device
> >> >> >>> >> >> Device does not match - skipping
> >> >> >>> >> >> Checking device (0001/0000) (005/004)
> >> >> >>> >> >> - VendorID: 0001
> >> >> >>> >> >> - ProductID: 0000
> >> >> >>> >> >> - Manufacturer: MEC
> >> >> >>> >> >> - Product: MEC0002
> >> >> >>> >> >> - Serial Number: unknown
> >> >> >>> >> >> - Bus: 005
> >> >> >>> >> >> Trying to match device
> >> >> >>> >> >> Device matches
> >> >> >>> >> >> failed to claim USB device, trying 2 more time(s)...
> >> >> >>> >> >> detaching kernel driver from USB device...
> >> >> >>> >> >> trying again to claim USB device...
> >> >> >>> >> >> HID descriptor retrieved (Reportlen = 624)
> >> >> >>> >> >> Report descriptor retrieved (Reportlen = 624)
> >> >> >>> >> >> Found HID device
> >> >> >>> >> >> Report Descriptor size = 624
> >> >> >>> >> >> Detected a UPS: MEC/MEC0002
> >> >> >>> >> >> Using subdriver: GENERIC HID 0.1
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.FlowID, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.ConfigVoltage, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.ConfigFrequency, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.LowVoltageTransfer, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.HighVoltageTransfer, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.iManufacturer, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.iProduct, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.iSerialNumber, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.FlowID, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.ConfigVoltage, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.ConfigFrequency, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.ConfigApparentPower, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.ConfigActivePower, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.DelayBeforeStartup, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.Flow.DelayBeforeShutdown, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.BatterySystem.BatterySystemID, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.BatterySystem.PresentStatus.Used, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.BatterySystem.PresentStatus.Good, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.BatterySystem.Voltage, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.BatterySystem.Temperature, Type: Feature
> >> >> >>> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.BatterySystem.Test, Type: Input
> >> >> >>> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> >>> >> >> Path: 00860004.BatterySystem.Test, Type: Feature
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.PowerConverterID
> >> >> >>> >> >> Path: 00860004.PowerConverter.PowerConverterID, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Input.InputID
> >> >> >>> >> >> Path: 00860004.PowerConverter.Input.InputID, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Input.FlowID
> >> >> >>> >> >> Path: 00860004.PowerConverter.Input.FlowID, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Input.PresentStatus.Good
> >> >> >>> >> >> Path: 00860004.PowerConverter.Input.PresentStatus.Good, Type:
> >> >> >>> Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Input.Voltage
> >> >> >>> >> >> Path: 00860004.PowerConverter.Input.Voltage, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Input.Frequency
> >> >> >>> >> >> Path: 00860004.PowerConverter.Input.Frequency, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Output.OutputID
> >> >> >>> >> >> Path: 00860004.PowerConverter.Output.OutputID, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Output.FlowID
> >> >> >>> >> >> Path: 00860004.PowerConverter.Output.FlowID, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Output.Voltage
> >> >> >>> >> >> Path: 00860004.PowerConverter.Output.Voltage, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Output.Frequency
> >> >> >>> >> >> Path: 00860004.PowerConverter.Output.Frequency, Type: Input
> >> >> >>> >> >> Can't find object 00860004.PowerConverter.Output.PercentLoad
> >> >> >>> >> >> Path: 00860004.PowerConverter.Output.PercentLoad, Type: Input
> >> >> >>> >> >> Can't find object
> >> >> >>> 00860004.PowerConverter.Output.PresentStatus.Overload
> >> >> >>> >> >> Path: 00860004.PowerConverter.Output.PresentStatus.Overload, Type:
> >> >> >>> Input
> >> >> >>> >> >> Can't find object
> >> >> >>> 00860004.PowerConverter.Output.PresentStatus.Boost
> >> >> >>> >> >> Path: 00860004.PowerConverter.Output.PresentStatus.Boost, Type:
> >> >> >>> Input
> >> >> >>> >> >> Can't find object
> >> >> >>> 00860004.PowerConverter.Output.PresentStatus.Buck
> >> >> >>> >> >> Path: 00860004.PowerConverter.Output.PresentStatus.Buck, Type:
> >> >> >>> Input
> >> >> >>> >> >> upsdrv_updateinfo...
> >> >> >>> >> >> dstate_init: sock /var/state/ups/newhidups-auto open on fd 5
> >> >> >>> >> >> upsdrv_updateinfo...
> >> >> >>> >> >> Waiting for notifications...
> >> >> >>> >> >> upsdrv_updateinfo...
> >> >> >>> >> >> Waiting for notifications...
> >> >> >>> >> >> Signal 2: exiting
> >> >> >>> >> >> Closing device
> >> >> >>> >> >> rmk drivers # >> >> >> >> >> >> Peter Selinger writes: >> >> >>
> >> >> >>> >> > Rob and Dave, >> >> > >> >> > that device looks like it is using an
> >> >> >>> illegal vendor id, "0001". It
> >> >> >>> >> >> > also looks like it is made by MEC, not Belkin (probably sold
> >> >> >>> under
> >> >> >>> >> >> > license). >> >> > >> >> > We might be able to support its USB
> >> >> >>> interface. To find out more,
> >> >> >>> >> >> > please do the following: >> >> > >> >> > * get the latest
> >> >> >>> development version of NUT from SVN. You can follow
> >> >> >>> >> >> > the instructions at http://www.networkupstools.org/source.html
> >> >> >>> under
> >> >> >>> >> >> > "Development tree" to get it. >> >> > >> >> > * post the
> >> >> >>> output of >> >> > >> >> > drivers/newhidups -DD -u root -x generic -x
> >> >> >>> vendorid=0001 auto >> >> > >> >> > from this newest NUT version. >> >>
> >> >> >>> > >> >> > This should output a bunch of debugging data, and then go into
> >> >> >>> an
> >> >> >>> >> >> > infinite loop waiting for data. You can do "Ctrl-C" to kill the
> >> >> >>> driver
> >> >> >>> >> >> > (it will not do anything useful at this point). >> >> > >> >> >
> >> >> >>> -- Peter >> >> > >> >> > spamwhole at gmail.com wrote:
> >> >> >>> >> >> >> >> >> >> Hi, >> >> >> >> >> >> I have the same device, a
> >> >> >>> F6H500ukUNV, it has both RS-232 and USB. >> >> >> >> >> >> url:
> >> >> >>> >> >> >>
> >> >> >>> http://catalog.belkin.com/IWCatProductPage.process?Product_Id=201050 >>
> >> >> >>> >> >> >> >> >> >> >> >> The details I have from my system are below. If
> >> >> >>> you would like further >> >> >> informatinon, or a more verbose lsusb
> >> >> >>> please let me know. >> >> >> >> >> >> thanks >> >> >> >> >> >> Rob >>
> >> >> >>> >> >> >> >> >> dmesg:
> >> >> >>> >> >> >> hiddev96: USB HID v1.00 Device [MEC MEC0002] on
> >> >> >>> usb-0000:05:06.1-2 >> >> >> >> >> >> lsusb:
> >> >> >>> >> >> >> Bus 005 Device 004: ID 0001:0000 Fry's Electronics >> >> >> >>
> >> >> >>> >> >> cat /proc/bus/usb/device:
> >> >> >>> >> >> >> T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=1.5 MxCh=
> >> >> >>> 0
> >> >> >>> >> >> >> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> >> >> >>> >> >> >> P: Vendor=0001 ProdID=0000 Rev= 1.00
> >> >> >>> >> >> >> S: Manufacturer=MEC
> >> >> >>> >> >> >> S: Product=MEC0002
> >> >> >>> >> >> >> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> >> >> >>> >> >> >> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00
> >> >> >>> Driver=usbhid
> >> >> >>> >> >> >> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms >> >> >> >> >> >>
> >> >> >>> >
> >> >> >>> >> >> >> >Hi Dave, >> >> >> >
> >> >> >>> >> >> >> >nothing in the outputs you sent looks like any Belkin device
> >> >> >>> is
> >> >> >>> >> >> >> >present. Are you sure it is attached to your computer? You
> >> >> >>> should have
> >> >> >>> >> >> >> >something like this in /proc/bus/usb/devices: >> >> >> >
> >> >> >>> >> >> >> >T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5
> >> >> >>> MxCh= 0
> >> >> >>> >> >> >> >D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> >> >> >>> >> >> >> >P: Vendor=050d ProdID=0980 Rev= 0.06
> >> >> >>> >> >> >> >S: Manufacturer= >> >> >> >S: Product=UPS
> >> >> >>> >> >> >> >C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA
> >> >> >>> >> >> >> >I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00
> >> >> >>> Driver=usbhid
> >> >> >>> >> >> >> >E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=248ms >> >> >> >
> >> >> >>> >> >> >> >Note "Vendor=050d", which is Belkin's vendor ID. >> >> >> >
> >> >> >>> >> >> >> >The output from newhidups does not show a 050d/XXXX device
> >> >> >>> either. >> >> >> >
> >> >> >>> >> >> >> >-- Peter >> >> >> >
> >> >> >>> >> >> >> >meherenow at darkglobe.org wrote:
> >> >> >>> >> >> >> >> >> >> >> >> I have a Belkin F6H500ukUNV ups that I am
> >> >> >>> attempting to get working =20
> >> >> >>> >> >> >> >> under nut, however it
> >> >> >>> >> >> >> >> does not appear to be detected by nut, I'm assuming that I
> >> >> >>> need to =20
> >> >> >>> >> >> >> >> feed some information
> >> >> >>> >> >> >> >> back to you guys to get it included in the database
> >> >> >>> somwhere. >> >> >> >> >> >> >> >> I've included (what I can think might
> >> >> >>> be) the relivant outputs. Please >=20
> >> >> >>> >> >> >> >> let me know if you
> >> >> >>> >> >> >> >> require anything else. >> >> >> >> >> >> >> >> dmesg output
> >> >> >>> >> >> >> >> /sbin/newhidsups output
> >> >> >>> >> >> >> >> ll /dev/usb*
> >> >> >>> >> >> >> >> cat /proc/bus/usb/devices >> >> >> >> >> >> >> >> p.s. I
> >> >> >>> tried chmodding /dev/usb<blah> 777 just incase it was a =20
> >> >> >>> >> >> >> >> permissions problem, but
> >> >> >>> >> >> >> >> that didn't help either. >> >> >> >> >> >> >> >> Many
> >> >> >>> thanks. >> >> >> >> >> >> >> >>
> >> >> >>> ###########################################################
> >> >> >>> >> >> >> >> dmesg output when connecting the ups >> >> >> >> >> >> >> >>
> >> >> >>> usb 2-1: new low speed USB device using uhci_hcd and address 2
> >> >> >>> >> >> >> >> PM: Adding info for usb:2-1
> >> >> >>> >> >> >> >> PM: Adding info for No Bus:usbdev2.2_ep00
> >> >> >>> >> >> >> >> usb 2-1: configuration #1 chosen from 1 choice
> >> >> >>> >> >> >> >> PM: Adding info for usb:2-1:1.0
> >> >> >>> >> >> >> >> hiddev96: USB HID v1.00 Device [MEC MEC0002] on
> >> >> >>> usb-0000:00:10.1-1
> >> >> >>> >> >> >> >> PM: Adding info for No Bus:usbdev2.2_ep81 >> >> >> >> >> >>
> >> >> >>> _______________________________________________
> >> >> >>> >> >> >> Nut-upsdev mailing list
> >> >> >>> >> >> >> Nut-upsdev at lists.alioth.debian.org
> >> >> >>> >> >> >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev >>
> >> >> >>> >> >> >> >> > >> >> >> > >> >
> >> >> >>>
> >> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> Nut-upsdev mailing list
> >> >> Nut-upsdev at lists.alioth.debian.org
> >> >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> >> >>
> >> >
> >>
> >
>
More information about the Nut-upsdev
mailing list