[Nut-upsdev] tripp lite smart2200RMXL2U error reading protocol

[Kjell Claesson]

OK Lance,

This may indicate that we hit another type of protocol.
It's not the same usb (even if the name is the same)
that is named as compatible to this driver.

see:http://lists.alioth.debian.org/pipermail/nut-upsuser/2006-September/001671.html

Charles Lepple and Peter Selinger have much more experience of this 
drivers. So I think they going to give you more info about this.

Regards
Kjell
 
fre 2007-05-11 klockan 13:13 -0500 skrev Lance Thomas:
> Here's a shot of the lsusb
> Bus 003 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640
> USB-2.0 "TetraHub"
> Bus 003 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
> Bus 002 Device 003: ID 413c:2003 Dell Computer Corp.
> Bus 002 Device 002: ID 09ae:3012 Tripp Lite
> Bus 002 Device 001: ID 0000:0000
> 
> >>> Kjell Claesson <kjell.claesson at epost.tidanet.se> 05/11/07 12:42 PM
> >>>
> Hi Lance,
> 
> Can you do a
> 
> lsusb
> 
> So we get the product and vendor id. The driver
> seems only to support product-id 0001, so if your
> ups have 3012 as product id, it is a new version.
> 
> Regards
> Kjell
> 
> fre 2007-05-11 klockan 11:08 -0500 skrev Lance Thomas:
> > I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12.
> > I originally tried the hidups driver which seemed to work, but
> produced
> > a large amount of unhandled events.  Then I tried the newhidups which
> > told me my ups wasn't supported.  When I try using
> > 
> > tripplite_usb -u root -DDDD /proc/bus/usb/002/002
> > 
> > I get that there isn't a match.  But when I try using 
> > 
> > tripplite_usb -DDDD -a tripplite1 
> > 
> > with the following ups.conf:
> > [tripplite1]
> >         driver = tripplite_usb
> >         port = /proc/bus/usb/002/002
> >         productid = 3012
> >         bus = 002
> >         desc = "top ups"
> > 
> > I get it to run and find the HID, but it returns the following errors
> > before quitting:
> > Detected a UPS: Tripp Lite /TRIPP LITE SMART2200RMXL2U
> > send_cmd(msg_len=3, type='W')
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > send_cmd: send_try = 3, recv_try = 3
> > 
> > Could not reset watchdog. Please send model information to nut-upsdev
> > mailing list
> > send_cmd(msg_len=2, type='
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > libusb_get_interrupt() returned 4 instead of 8
> > send_cmd: send_try = 3, recv_try = 3
> > 
> > Error reading protocol
> > 
> > 
> > Any suggestions?
> > ____________________________________________________________________
> > 
> > This email and any attachments may contain confidential information
> and is 
> > solely for the intended recipient(s).  Email communications are not
> considered 
> > secure.  If you are not the intended recipient(s) of this email you
> are expected 
> > to disregard the content, delete the message and notify the original
> sender.
> > 
> > --University of Wisconsin, Department of Family Medicine--
> > ____________________________________________________________________
> > 
> > **UW DFM**
> > 
> > 
> > _______________________________________________
> > Nut-upsdev mailing list
> > Nut-upsdev at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> 
> 
> _______________________________________________
> Nut-upsdev mailing list
> Nut-upsdev at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> 
> 
>