[Nut-upsdev] tripp lite smart2200RMXL2U error reading protocol
Peter Selinger
selinger at mathstat.dal.ca
Thu May 17 00:43:32 UTC 2007
Hi Patrick,
as you know, I haven't had much time to work on NUT. Now my wife is
expecting our first baby in 1 week, so I don't think I will get back
to it in the foreseeable future.
I remember that there was something I was planning to do for your
device, but I have forgotten what it was. Was it that your device was
mostly working, but something had to be tweaked? I now have, it seems,
thousands of unread, as well as read, NUT messages, so perhaps it's
best if you remind me. I seem to remember that it was something
relatively easy, which I had been putting off because I hoped to take
care of it as part of a larger rewrite. Perhaps I can quickly do the
easy thing without the rewrite.
-- Peter
Patrick Krepps wrote:
>
> Hi Peter,
>
> I noticed you listed the SmartOnlineSU1500. Is that by chance the one you were
> looking at for me a while back? I hadn't heard anything back from you and
> I've been plaing around with DNS servers, so I hadn't tried NUT in a few
> weeks. I am going to go get the latest SVN version and give it a try. Is
> there anything you need from me?
>
> Thanks,
> Patrick
>
> On Monday 14 May 2007 11:16, Peter Selinger wrote:
> > OK, that is very similar to the other Tripplite-HID devices; the
> > functionality of this device seems to be almost a superset of the
> > OMNI1000LCD and of the SmartOnlineSU1500RTXL2ua.
> >
> > It should work without problems with the newhidups driver, if you just
> > add the 0x3012 to the source code where Charles suggested.
> >
> > I have just done this in the latest SVN version (revision 901).
> > Note that in SVN, the driver has been renamed to usbhid-ups from
> > newhidups.
> >
> > -- Peter
> >
> > Lance Thomas wrote:
> > > I'll look into the newest svn of nut.
> > > Here is the output from:
> > > newhidups -u root -x vendorid=09ae -x explore auto
> > >
> > > Detected a UPS: Tripp Lite /TRIPP LITE SMART2200RMXL2U
> > > Using subdriver: EXPLORE HID 0.1
> > > Path: UPS.PowerSummary.iProduct, Type: Feature, Value: 2.000000
> > > Path: UPS.PowerSummary.iSerialNumber, Type: Feature, Value: 3.000000
> > > Path: UPS.PowerSummary.iManufacturer, Type: Feature, Value: 1.000000
> > > Path: UPS.PowerSummary.Input.ConfigVoltage, Type: Feature, Value:
> > > 120.000000
> > > Path: UPS.PowerSummary.Input.Voltage, Type: Feature, Value: 125.599998
> > > Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, Value:
> > > 2.000000
> > > Path: UPS.PowerSummary.iDeviceChemistry, Type: Feature, Value: 4.000000
> > > Path: UPS.PowerSummary.iOEMInformation, Type: Feature, Value: 1.000000
> > > Path: UPS.PowerSummary.CapacityMode, Type: Feature, Value: 2.000000
> > > Path: UPS.PowerSummary.RemainingCapacity, Type: Input, Value: 100.000000
> > > Path: UPS.PowerSummary.RemainingCapacity, Type: Feature, Value:
> > > 100.000000
> > > Path: UPS.PowerSummary.RemainingCapacityLimit, Type: Feature, Value:
> > > 10.000000
> > > Path: UPS.PowerSummary.FullChargeCapacity, Type: Feature, Value:
> > > 100.000000
> > > Path: UPS.PowerSummary.DesignCapacity, Type: Feature, Value: 100.000000
> > > Path: UPS.PowerSummary.WarningCapacityLimit, Type: Feature, Value:
> > > 30.000000
> > > Path: UPS.PowerSummary.CapacityGranularity1, Type: Feature, Value:
> > > 1.000000
> > > Path: UPS.PowerSummary.CapacityGranularity2, Type: Feature, Value:
> > > 1.000000
> > > Path: UPS.PowerSummary.Rechargeable, Type: Feature, Value: 1.000000
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus.InternalFailure, Type: Input,
> > > Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input,
> > > Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Input, Value:
> > > 1.000000
> > > Path: UPS.PowerSummary.PresentStatus., Type: Input
> > > Path: UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit, Type:
> > > Input, Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus.FullyCharged, Type: Input, Value:
> > > 1.000000
> > > Path: UPS.PowerSummary.PresentStatus.Charging, Type: Input, Value:
> > > 0.000000
> > > Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Input, Value:
> > > 0.000000
> > > Path: UPS.PowerSummary.PresentStatus.FullyDischarged, Type: Input,
> > > Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus.NeedReplacement, Type: Input,
> > > Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus.InternalFailure, Type: Feature,
> > > Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Feature,
> > > Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Feature, Value:
> > > 1.000000
> > > Path: UPS.PowerSummary.PresentStatus., Type: Feature
> > > Path: UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit, Type:
> > > Feature, Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus.FullyCharged, Type: Feature, Value:
> > > 1.000000
> > > Path: UPS.PowerSummary.PresentStatus.Charging, Type: Feature, Value:
> > > 0.000000
> > > Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Feature, Value:
> > > 0.000000
> > > Path: UPS.PowerSummary.PresentStatus.FullyDischarged, Type: Feature,
> > > Value: 0.000000
> > > Path: UPS.PowerSummary.PresentStatus.NeedReplacement, Type: Feature,
> > > Value: 0.000000
> > > Path: UPS.BatterySystem.Battery.ConfigVoltage, Type: Feature, Value:
> > > 48.000000
> > > Path: UPS.BatterySystem.Battery.Voltage, Type: Feature, Value: 54.299999
> > > Path: UPS.BatterySystem.Battery.PresentStatus., Type: Feature
> > > Path: UPS.BatterySystem.Battery.PresentStatus., Type: Feature
> > > Path:
> > > UPS.BatterySystem.Battery.PresentStatus.BelowRemainingCapacityLimit,
> > > Type: Feature
> > > Path: UPS.BatterySystem.Battery.PresentStatus.FullyCharged, Type:
> > > Feature, Value: 0.000000
> > > Path: UPS.BatterySystem.Battery.PresentStatus.Charging, Type: Feature,
> > > Value: 1.000000
> > > Path: UPS.BatterySystem.Battery.PresentStatus.Discharging, Type:
> > > Feature, Value: 0.000000
> > > Path: UPS.BatterySystem.Battery.PresentStatus.FullyDischarged, Type:
> > > Feature, Value: 0.000000
> > > Path: UPS.BatterySystem.Battery.PresentStatus.NeedReplacement, Type:
> > > Feature, Value: 0.000000
> > > Path: UPS.BatterySystem.Battery.RemainingCapacity, Type: Feature, Value:
> > > 100.000000
> > > Path: UPS.BatterySystem.Test, Type: Feature, Value: 0.000000
> > > Path: UPS.BatterySystem.Temperature, Type: Feature, Value: 307.000000
> > > Path: UPS.Flow.ConfigVoltage, Type: Feature, Value: 120.000000
> > > Path: UPS.Flow.ConfigFrequency, Type: Feature, Value: 60.000000
> > > Path: UPS.Flow.ffff0097, Type: Feature, Value: 0.000000
> > > Path: UPS.Flow.ConfigApparentPower, Type: Feature, Value: 2200.000000
> > > Path: UPS.PowerConverter.Input.Voltage, Type: Feature, Value: 125.099998
> > > Path: UPS.PowerConverter.Input.Frequency, Type: Feature, Value:
> > > 59.900002
> > > Path: UPS.PowerConverter.Output.Voltage, Type: Feature, Value:
> > > 125.599998
> > > Path: UPS.PowerConverter.Output.Frequency, Type: Feature, Value:
> > > 59.900002
> > > Path: UPS.PowerConverter.Output.LowVoltageTransfer, Type: Feature,
> > > Value: 83.000000
> > > Path: UPS.PowerConverter.Output.HighVoltageTransfer, Type: Feature,
> > > Value: 145.000000
> > > Path: UPS.PowerConverter.PresentStatus.VoltageOutOfRange, Type: Feature,
> > > Value: 0.000000
> > > Path: UPS.PowerConverter.PresentStatus.Buck, Type: Feature, Value:
> > > 0.000000
> > > Path: UPS.PowerConverter.PresentStatus.Boost, Type: Feature, Value:
> > > 0.000000
> > > Path: UPS.PowerConverter.PresentStatus., Type: Feature
> > > Path: UPS.PowerConverter.PresentStatus.Overload, Type: Feature, Value:
> > > 0.000000
> > > Path: UPS.PowerConverter.PresentStatus.Used, Type: Feature, Value:
> > > 1.000000
> > > Path: UPS.PowerConverter.PresentStatus.OverTemperature, Type: Feature,
> > > Value: 0.000000
> > > Path: UPS.PowerConverter.PresentStatus.InternalFailure, Type: Feature,
> > > Value: 0.000000
> > > Path: UPS.PowerConverter.PresentStatus., Type: Feature
> > > Path: UPS.PowerConverter.PresentStatus., Type: Feature
> > > Path: UPS.PowerConverter.PresentStatus., Type: Feature
> > > Path: UPS.PowerConverter.PresentStatus., Type: Feature
> > > Path: UPS.PowerConverter.PresentStatus., Type: Feature
> > > Path: UPS.PowerConverter.PresentStatus., Type: Feature
> > > Path: UPS.PowerConverter.PresentStatus.AwaitingPower, Type: Feature,
> > > Value: 0.000000
> > > Path: UPS.PowerConverter.PresentStatus., Type: Feature
> > > Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, Value:
> > > -1.000000
> > > Path: UPS.OutletSystem.Outlet.DelayBeforeStartup, Type: Feature, Value:
> > > -1.000000
> > > Path: UPS.OutletSystem.Outlet.DelayBeforeReboot, Type: Feature, Value:
> > > -1.000000
> > > Path: UPS.OutletSystem.Outlet.PercentLoad, Type: Feature, Value:
> > > 43.000000
> > > Path: UPS.OutletSystem.Outlet.ffff0056, Type: Feature, Value: -1.000000
> > > Path: UPS.OutletSystem.Outlet.ffff0081, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff0091, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff0092, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff0093, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff0095, Type: Feature, Value: 7.000000
> > > Path: UPS.OutletSystem.Outlet.ffff0096, Type: Feature, Value: 7.000000
> > > Path: UPS.OutletSystem.Outlet.ffff0098, Type: Feature, Value: 0.000000
> > > Can't retrieve Report 106 (25): Inappropriate ioctl for device
> > > Path: UPS.OutletSystem.Outlet.ffff0099, Type: Feature
> > > Can't retrieve Report 107 (25): Inappropriate ioctl for device
> > > Path: UPS.OutletSystem.Outlet.ffff009a, Type: Feature
> > > Path: UPS.OutletSystem.Outlet.ffff00a7, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff00a9, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff00a2, Type: Feature, Value: 0.000000
> > > Can't retrieve Report 124 (25): Inappropriate ioctl for device
> > > Path: UPS.OutletSystem.Outlet.ffff00a8, Type: Feature
> > > Can't retrieve Report 114 (25): Inappropriate ioctl for device
> > > Path: UPS.OutletSystem.Outlet.ffff00a0, Type: Feature
> > > Path: UPS.OutletSystem.Outlet.ffff00aa, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff00a4, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff00ab, Type: Feature, Value: 0.000000
> > > Path: UPS.OutletSystem.Outlet.ffff00ac, Type: Feature, Value: 0.000000
> > > Path: UPS.ffff0010[1].ffff0075, Type: Feature
> > > Path: UPS.ffff0010[1].ffff0076, Type: Feature
> > > Path: UPS.ffff0010[1].ffff007c, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e1, Type: Feature
> > > Path: UPS.ffff0010[1].ffff007d, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e0, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e2, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e3, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e4, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e5, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e6, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e7, Type: Feature
> > > Path: UPS.ffff0010[1].ffff00e8, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00c0, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00c2, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00d2, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00d3, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00c1, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00c3, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00c5, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00d6, Type: Feature
> > > Path: UPS.ffff0015[1].ffff00c4, Type: Feature
> > > upsdrv_updateinfo...
> > > dstate_init: sock /var/lib/nut/newhidups-auto open on fd 6
> > > upsdrv_updateinfo...
> > > Waiting for notifications...
> > >
> > > =>Got 1 HID Objects...
> > > find_hid_info: unknown variable: UPS.PowerSummary.RemainingCapacity
> > >
> > > upsdrv_updateinfo...
> > > Waiting for notifications...
> > >
> > > =>Got 24 HID Objects...
> > > find_hid_info: unknown variable: UPS.PowerSummary.PresentStatus.
> > >
> > > find_hid_info: unknown variable: UPS.PowerSummary.PresentStatus.
> > >
> > > >>> Peter Selinger <selinger at mathstat.dal.ca> 05/14/07 9:43 AM >>>
> > >
> > > Lance Thomas wrote:
> > > > I tried the newhidups with the command:
> > > > newhidups -u root -DDDD -x vendorid=09ae -x productid=3012 auto
> > > >
> > > > and it goes through finds the ups and tells me that this particular
> > > > Tripp Lite device (09ae/3012) is not supported. And then to try the
> > > > tripplite_usb.
> > >
> > > And then it asks you to report the results to the mailing list, which
> > > you have hereby done :)
> > >
> > > There are two things to do:
> > >
> > > (1) try the --explore option that Charles was talking about. This will
> > > not make the driver work, but it will generate sufficient debugging
> > > info for us to make the driver work. Please use -DD and not -DDDD,
> > > as the latter generates too much useless information. Please post
> > > the output.
> > >
> > > (2) If you can upgrade from 2.0.5 to a current SVN version of NUT
> > > (compiled from sources), then the driver might work directly.
> > >
> > > -- Peter
> > >
> > > > I forgot to mention that when we got this tripplite we took the
> > >
> > > standard
> > >
> > > > NEMA 5-20P input plug off and are using the NEMA 5-15P plug instead.
> > >
> > > I
> > >
> > > > don't think that would make a difference, but I thought I'd mention it
> > > > just in case.
> > > >
> > > > ----
> > > > Lance sent me the output of "lsusb -vvv" for this device off-list, and
> > > > here is the key portion of that:
> > > >
> > > > HID Device Descriptor:
> > > > bLength 9
> > > > bDescriptorType 33
> > > > bcdHID 1.10
> > > > bCountryCode 0 Not supported
> > > > bNumDescriptors 1
> > > > bDescriptorType 34 Report
> > > > wDescriptorLength 1121
> > > > Report Descriptor: (length is 1121)
> > > > Item(Global): Usage Page, data= [ 0x84 ] 132
> > > > Power Device Page
> > > > Item(Local ): Usage, data= [ 0x04 ] 4
> > > > UPS
> > > > Item(Main ): Collection, data= [ 0x01 ] 1
> > > > Application
> > > > Item(Local ): Usage, data= [ 0x24 ] 36
> > > > Power Summary
> > > > Item(Main ): Collection, data= [ 0x00 ] 0
> > > > Physical
> > > > Item(Global): Usage Page, data= [ 0x84 ] 132
> > > > Power Device Page
> > > >
> > > > As Kjell mentioned, this looks like another one of those cases where
> > > > the innards of the UPS got an overhaul, but they kept the model name.
> > > >
> > > > Lance: I forget, did you try the newhidups driver as well? That's the
> > > > one that should eventually support this UPS (tripplite_usb only
> > > > handles the older serial-protocol-over-USB models).
> > > >
> > > > You may have to pass the manufacturer and model options to newhidups
> > > > as well, since we were not aware of this alternate vendor/product ID
> > > > for this model of UPS.
> > > >
> > > > On 5/11/07, Lance Thomas <Lance.Thomas at fammed.wisc.edu> wrote:
> > > > > I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12.
> > > > > I originally tried the hidups driver which seemed to work, but
> > > >
> > > > produced
> > > >
> > > > > a large amount of unhandled events. Then I tried the newhidups
> > >
> > > which
> > >
> > > > > told me my ups wasn't supported. When I try using
> > > > >
> > > > > tripplite_usb -u root -DDDD /proc/bus/usb/002/002
> > > > >
> > > > > I get that there isn't a match. But when I try using
> > > > >
> > > > > tripplite_usb -DDDD -a tripplite1
> > > > >
> > > > > with the following ups.conf:
> > > > > [tripplite1]
> > > > > driver = tripplite_usb
> > > > > port = /proc/bus/usb/002/002
> > > > > productid = 3012
> > > > > bus = 002
> > > > > desc = "top ups"
> > > > >
> > > > > I get it to run and find the HID, but it returns the following
> > >
> > > errors
> > >
> > > > > before quitting:
> > > > > Detected a UPS: Tripp Lite /TRIPP LITE SMART2200RMXL2U
> > > > > send_cmd(msg_len=3, type='W')
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > send_cmd: send_try = 3, recv_try = 3
> > > > >
> > > > > Could not reset watchdog. Please send model information to
> > >
> > > nut-upsdev
> > >
> > > > > mailing list
> > > > > send_cmd(msg_len=2, type='
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > libusb_get_interrupt() returned 4 instead of 8
> > > > > send_cmd: send_try = 3, recv_try = 3
> > > > >
> > > > > Error reading protocol
> > > > >
> > > > >
> > > > > Any suggestions?
> > > > > ____________________________________________________________________
> > > > >
> > > > > This email and any attachments may contain confidential information
> > > >
> > > > and is
> > > >
> > > > > solely for the intended recipient(s). Email communications are not
> > > >
> > > > considered
> > > >
> > > > > secure. If you are not the intended recipient(s) of this email you
> > > >
> > > > are expected
> > > >
> > > > > to disregard the content, delete the message and notify the original
> > > >
> > > > sender.
> > > >
> > > > > --University of Wisconsin, Department of Family Medicine--
> > > > > ____________________________________________________________________
> > > > >
> > > > > **UW DFM**
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Nut-upsdev mailing list
> > > > > Nut-upsdev at lists.alioth.debian.org
> > > > > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> > > >
> > > > --
> > > > - Charles Lepple
> > > >
> > > > _______________________________________________
> > > > Nut-upsdev mailing list
> > > > Nut-upsdev at lists.alioth.debian.org
> > > > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Nut-upsdev mailing list
> > > > Nut-upsdev at lists.alioth.debian.org
> > > > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> > >
> > > _______________________________________________
> > > Nut-upsdev mailing list
> > > Nut-upsdev at lists.alioth.debian.org
> > > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> >
> > _______________________________________________
> > Nut-upsdev mailing list
> > Nut-upsdev at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
>
More information about the Nut-upsdev
mailing list